Gutters cost in Delaware
Statewide estimate from BLS wages and BEA prices. Reviewed Nov 4, 2026.
- Statewide range (160 linear ft)
- $1,250 – $4,100
- Per linear ft
- $7.90 – $24.50
- before permit
- Versus US midpoint
- −2%
- US $2,750
- Metros covered
- 1
Across Delaware, new gutters costs about $1,250 to $4,100 for 160 linear ft. Statewide, that midpoint is 2% below the US figure of $2,750. Sheet metal workers earn a median $29.55 an hour in Delaware (US: $29.71).
Delaware has one metro in our dataset, Dover, so the statewide and metro figures are close. The state figure uses BLS statewide wages, which include rural areas.
Estimate your gutters cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 160 linear ft in Delaware (statewide), standard level
$2,100 to $3,250
About $13 to $19.50 per linear ft before permits. Labor is about 39% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,150 | $1,900 |
| Labor | $890 | $1,200 |
| Permits and fees | $60 | $140 |
| Total | $2,100 | $3,250 |
Cost breakdown for 160 linear ft in Delaware
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $620 | $1,550 | $2,450 | 57% |
| Labor | $650 | $1,050 | $1,450 | 39% |
| Permits and fees | $0 | $100 | $200 | 4% |
| Total | $1,250 | $2,700 | $4,100 | 100% |
Which Delaware city is cheapest for gutters?
Delaware has one metro in our dataset, Dover, so the statewide and metro figures are close. The state figure uses BLS statewide wages, which include rural areas. Each row prices the default size with that metro's own BLS wages and BEA price levels, so the gap between rows is real local variation rather than a flat markup.
| Metro | Range (160 linear ft) | Midpoint | vs. state |
|---|---|---|---|
| Dover, DE | $1,250 – $4,100 | $2,700 | level |
Delaware labor market for gutters
Statewide wages come from BLS's state-level estimates, which blend big cities with small towns and rural areas. 3 trades drive the labor line for this job, and the weighted ratio against the national wage level is 1.01 for Delaware.
For sheet metal workers (47-2211, weighted 40%) the local median is $29.55 an hour, which is in line with the national $29.71. The middle half of them earn between $20.80 and $38.65 an hour. BLS counts 440 of them working in the state, 9.1 for every 10,000 jobs (US: 7.7), so the local bench is deeper than average.
For roofers (47-2181, weighted 30%) the local median is $28.58 an hour, which is 7% above the national $26.65. The middle half of them earn between $20.40 and $30.59 an hour. BLS counts 230 of them working in the state, 4.7 for every 10,000 jobs (US: 8.7), so the local bench is thinner than average.
Construction laborers (47-2061), 30% of the weighting: a median of $21.90 an hour, 3% below the US median of $22.66. The middle half of them earn between $17.93 and $27.07 an hour. About 3,240 work in the state. That is 66.8 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.
A crew paid at the 75th percentile for sheet metal workers ($38.65 an hour) would add about $130 to the statewide midpoint; one at the 25th percentile ($20.80) would take off about $120. Use that as a rough guide to how far a bid can sit from our midpoint on wages alone.
BLS counts 484,790 jobs across Delaware (May 2025), which is 0.3% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Sheet metal workers (47-2211) | 40% | $20.80 | $29.55 | $38.65 | $29.71 | 0.99 | state |
| Roofers (47-2181) | 30% | $20.40 | $28.58 | $30.59 | $26.65 | 1.07 | state |
| Construction laborers (47-2061) | 30% | $17.93 | $21.90 | $27.07 | $22.66 | 0.97 | state |
| Blended | 100% | 1.01 | |||||
Delaware seasons and gutters
Season matters for gutters. For each Delaware metro below we took NOAA's 1991-2020 monthly normals from the nearest suitable station and counted comfortable months for exterior installation.
Dover has 11 comfortable months (February through December), with about 48 inches of precipitation a year.
We do not adjust prices by month, because we have no reliable published data on seasonal pricing. Timing is still worth raising when you collect bids.
| Metro | Jan avg low °F | Jul avg high °F | Precip (in/yr) | Comfortable months |
|---|---|---|---|---|
| Dover | 28 | 87 | 48 | 11: February through December |
Other Delaware jobs that often go with gutters
The table prices neighboring jobs at their usual sizes using statewide Delaware wages and prices. Against national midpoints, roof replacement comes out highest (+2%) and vinyl siding lowest (−3%), because each job leans on different trades.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $6,300 – $12,700 | +2% |
| Metal roof | 2,000 sq ft of roof | $10,400 – $32,600 | +1% |
| Vinyl siding | 2,100 sq ft of wall | $8,150 – $24,400 | −3% |
| French drain | 60 linear ft | $590 – $2,050 | −1% |
| Attic insulation | 1,000 sq ft | $1,000 – $4,000 | level |
Delaware versus the states around it
Delaware ranks 26 of 51 (the 50 states plus DC) for gutters, where 1 is the most expensive. The costliest is Hawaii at $3,400 and the cheapest Arkansas at $2,400, both for 160 linear ft at the midpoint. Delaware sits at $2,700. The five states closest by workforce center are listed below.
| State | Distance | Range | Midpoint | vs. here |
|---|---|---|---|---|
| New Jersey | 60 miles away | $1,600 – $5,000 | $3,300 | +23% |
| Maryland | 60 miles away | $1,300 – $4,300 | $2,800 | +5% |
| Pennsylvania | 100 miles away | $1,300 – $4,200 | $2,750 | +2% |
| District of Columbia | 110 miles away | $1,350 – $4,450 | $2,900 | +8% |
| New York | 150 miles away | $1,450 – $4,700 | $3,050 | +14% |
Gutters: what moves the price in Delaware
Material
Vinyl is $8-$12 per linear foot installed and aluminum $10-$20. Steel and copper run higher (HomeGuide).
Seamless
Seamless costs $3-$5+ more per linear foot than sectional, but has fewer places to leak.
Stories
Two-story homes add $1-$3 per linear foot for ladders and fall protection.
Permit
Local building codes may add $50-$200, though most cities don't require one.
Quality levels and sizes in Delaware
The cited range is cut into three overlapping bands (basic, standard and premium) and scaled to statewide Delaware wages and prices. The grid prices the same bands at 3 common sizes.
Basic
$1,250 to $2,400
Vinyl or sectional aluminum, single story
Standard
$2,100 to $3,250
Seamless aluminum K-style, standard downspouts
Premium
$2,950 to $4,100
Steel or copper, two stories, custom length
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small house (120 linear ft) | $950 – $1,800 | $1,600 – $2,500 | $2,250 – $3,150 |
| average house (160 linear ft) | $1,250 – $2,400 | $2,100 – $3,250 | $2,950 – $4,100 |
| large house (240 linear ft) | $1,900 – $3,550 | $3,150 – $4,800 | $4,400 – $6,050 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,100 to $3,250 for Delaware is attached.
A detailed PDF report of this estimate, $9
Multi-page report for Delaware: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Gutters in Delaware: your questions
+How much does it cost to install gutters in Delaware?
$1,250 to $4,100 for 160 linear ft, using statewide wages and prices. Metro areas inside Delaware can sit above or below that.
+Which city in Delaware is cheapest for gutters?
Dover at about $2,700 (midpoint, 160 linear ft).
+Is gutters cheaper in Delaware than the US average?
It is 2% cheaper: $2,700 against $2,750 for 160 linear ft at the midpoint.
+What share of the price is labor in Delaware?
About 39% ($1,050). Materials are 57%. Statewide labor for this job is weighted 1.01x the national wage level.
+What do sheet metal workers earn in Delaware?
The BLS statewide median is $29.55 an hour, against $29.71 for the US. The 25th to 75th percentile range is $20.80 to $38.65.
+Where does Delaware rank for gutters costs?
26th most expensive of 51 (the 50 states plus DC) at the midpoint, $2,700 for 160 linear ft. Rank 1 is the costliest.
+What do basic and premium gutters work cost in Delaware?
For 160 linear ft, basic work runs $1,250 to $2,400 and premium work $2,950 to $4,100. Basic means: vinyl or sectional aluminum, single story. Premium means: steel or copper, two stories, custom length.
+Does the season matter for gutters in Delaware?
Yes where winters or summers are hard. Of the Delaware metros we cover, Dover has the most comfortable months (11 of 12) based on NOAA 1991-2020 normals. Our prices do not change by month, so ask contractors whether they charge more or less in busy and slow seasons.
Gutters by city in Delaware
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Gutter Installation Cost? (2026) (accessed November 4, 2026)
- Home Genius Exteriors: How Much Does Gutter Installation Cost? (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus the $4-$9 per linear foot labor figure from Home Genius Exteriors.