Gutters cost in Greeley, CO
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (160 linear ft)
- $1,200 – $3,950
- Per linear ft
- $7.40 – $23.50
- before permit
- Versus US midpoint
- −7%
- US $2,750
- Rank of 300 metros
- #183
- 1 = most expensive
New gutters in Greeley, CO usually costs $1,200 to $3,950 for 160 linear ft. That works out to about $7.40 to $23.50 per linear ft before permits. Compared with the national midpoint that is $180 less. Sheet metal workers earn a median of $24.05 an hour in the Greeley area, 19% below the US median of $29.71.
Estimate your gutters cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 160 linear ft in Greeley, CO, standard level
$2,000 to $3,100
About $12 to $18.50 per linear ft before permits. Labor is about 36% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,150 | $1,900 |
| Labor | $780 | $1,050 |
| Permits and fees | $60 | $140 |
| Total | $2,000 | $3,100 |
Cost breakdown for 160 linear ft in Greeley, CO
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $610 | $1,550 | $2,450 | 60% |
| Labor | $570 | $920 | $1,300 | 36% |
| Permits and fees | $0 | $100 | $200 | 4% |
| Total | $1,200 | $2,550 | $3,950 | 100% |
Why Greeley prices look the way they do
We price the labor side from BLS wage data for 3 trades: sheet metal workers at 40%, roofers at 30%, construction laborers at 30%. Weighted together, Greeley wages are 0.89 times the national level. Labor makes up about 36% of the midpoint estimate (38% at national prices).
Materials are scaled with BEA's regional price parity for goods. Greeley is at 96.1 against 100 for the US, so a materials line of $1,600 nationally becomes $1,550 here (midpoint, 160 linear ft). Permits follow the all-items index of 100.2: $0 to $200.
What local crews earn in Greeley
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Greeley the blend is 0.89.
Sheet metal workers (47-2211), 40% of the weighting: a median of $24.05 an hour, 19% below the US median of $29.71. The middle half of them earn between $22.68 and $29.28 an hour. About 120 work in the metro. That is 10.0 per 10,000 jobs, compared with 7.7 nationally, which suggests plenty of local crews to bid.
Roofers (47-2181), 30% of the weighting: a median of $24.01 an hour, 10% below the US median of $26.65. The middle half of them earn between $22.87 and $29.06 an hour. About 250 work in the metro. That is 20.9 per 10,000 jobs, compared with 8.7 nationally, which suggests plenty of local crews to bid.
For construction laborers (47-2061, weighted 30%) the local median is $22.19 an hour, which is in line with the national $22.66. The middle half of them earn between $19.97 and $26.19 an hour. BLS counts 1,430 of them working in the area, 119.6 for every 10,000 jobs (US: 70.5), so the local bench is deeper than average.
A quick sensitivity check: moving the lead trade (sheet metal workers) from the median to the 75th percentile wage adds about $75 to the midpoint estimate; the 25th percentile takes off about $20. That is a swing of roughly 0.7% to 2.9% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Greeley has 119,540 jobs in total (BLS, May 2025), ranking 184th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Sheet metal workers (47-2211) | 40% | $22.68 | $24.05 | $29.28 | $29.71 | 0.81 | metro |
| Roofers (47-2181) | 30% | $22.87 | $24.01 | $29.06 | $26.65 | 0.90 | metro |
| Construction laborers (47-2061) | 30% | $19.97 | $22.19 | $26.19 | $22.66 | 0.98 | metro |
| Blended | 100% | 0.89 | |||||
Greeley weather and the gutters calendar
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Greeley Unc (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Greeley are February through June and August through November: 9 of 12. Outside them, January and December have an average daytime high under 45°F, and July has an average daytime high of 90°F or more.
In January and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Greeley gets about 15 inches of precipitation in a normal year, including roughly 35 inches of snow. The wettest months are April, May and June (2.6 inches in May). Inside the workable window, February and November are the driest, at 0.5 and 0.7 inches. The station averages about 58 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 44 | 18 | 0.5 | Cold |
| Feb | 48 | 20 | 0.5 | Workable |
| Mar | 59 | 28 | 0.9 | Workable |
| Apr | 66 | 35 | 1.8 | Workable |
| May | 75 | 45 | 2.6 | Workable |
| Jun | 86 | 54 | 1.8 | Workable |
| Jul | 92 | 59 | 1.6 | Hot |
| Aug | 89 | 57 | 1.6 | Workable |
| Sep | 82 | 49 | 1.1 | Workable |
| Oct | 68 | 37 | 1.1 | Workable |
| Nov | 54 | 26 | 0.7 | Workable |
| Dec | 43 | 18 | 0.6 | Cold |
Greeley: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Greeley. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from small house (120 linear ft) to large house (240 linear ft).
Basic
$1,200 to $2,300
Vinyl or sectional aluminum, single story
Standard
$2,000 to $3,100
Seamless aluminum K-style, standard downspouts
Premium
$2,850 to $3,950
Steel or copper, two stories, custom length
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small house (120 linear ft) | $890 – $1,750 | $1,500 – $2,350 | $2,150 – $3,000 |
| average house (160 linear ft) | $1,200 – $2,300 | $2,000 – $3,100 | $2,850 – $3,950 |
| large house (240 linear ft) | $1,750 – $3,400 | $3,000 – $4,600 | $4,200 – $5,800 |
Planning more than one job in Greeley?
Jobs that often go together with gutters are priced below at their usual sizes, using the same Greeley wage and price inputs. Compared with national midpoints, French drain comes out highest (−1%) and metal roof lowest (−8%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $5,650 – $11,700 | −7% |
| Metal roof | 2,000 sq ft of roof | $9,200 – $30,100 | −8% |
| Vinyl siding | 2,100 sq ft of wall | $8,000 – $24,000 | −5% |
| French drain | 60 linear ft | $600 – $2,100 | −1% |
| Attic insulation | 1,000 sq ft | $990 – $3,900 | −2% |
Why two Greeley quotes can differ
Permit
Local building codes may add $50-$200, though most cities don't require one.
Material
Vinyl is $8-$12 per linear foot installed and aluminum $10-$20. Steel and copper run higher (HomeGuide).
Seamless
Seamless costs $3-$5+ more per linear foot than sectional, but has fewer places to leak.
Is Greeley cheap or dear? The local comparison
Of the five closest metros, 2 are cheaper than Greeley. Cheyenne is the lowest at about $2,550 (midpoint, 160 linear ft), 55 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Greeley, COthis page | $1,200 – $3,950 | $2,550 | |
| Cheyenne, WY55 miles | $1,150 – $3,900 | $2,550 | −1% |
| Fort Collins, CO60 miles | $1,200 – $3,950 | $2,600 | +1% |
| Boulder, CO60 miles | $1,250 – $4,050 | $2,650 | +4% |
| Denver, CO80 miles | $1,300 – $4,250 | $2,750 | +8% |
| Colorado Springs, CO120 miles | $1,150 – $3,900 | $2,550 | −1% |
| Colorado (statewide) | $1,250 – $4,100 | $2,700 | +5% |
| United States | $1,300 – $4,200 | $2,750 | +7% |
Out of the 300 metros we cover, Greeley ranks #183 for the cost of this job (#1 is the most expensive). Statewide, Greeley is 4% below the Colorado figure.
Elsewhere in Colorado
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Denver, CO | 1,609,350 jobs | $1,300 – $4,250 | $2,750 | +8% |
| Colorado Springs, CO | 316,060 jobs | $1,150 – $3,900 | $2,550 | −1% |
| Boulder, CO | 192,390 jobs | $1,250 – $4,050 | $2,650 | +4% |
| Fort Collins, CO | 169,430 jobs | $1,200 – $3,950 | $2,600 | +1% |
| Grand Junction, CO | 67,170 jobs | $1,150 – $3,900 | $2,550 | −1% |
| Pueblo, CO | 61,780 jobs | $1,150 – $3,900 | $2,500 | −2% |
Metros of a similar size
Big cities and small ones price differently, so here is Greeley against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Kingsport, TN | 119,560 jobs | $1,200 – $3,900 | $2,550 | level |
| Utica, NY | 118,390 jobs | $1,300 – $4,200 | $2,750 | +7% |
| Burlington, VT | 120,150 jobs | $1,300 – $4,200 | $2,750 | +7% |
| Longview, TX | 118,060 jobs | $1,050 – $3,600 | $2,350 | −8% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,000 to $3,100 for Greeley, CO is attached.
A detailed PDF report of this estimate, $9
The report lays out the gutters numbers for Greeley, CO line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Gutters in Greeley: your questions
+How much does it cost to install gutters in Greeley?
For 160 linear ft, expect $1,200 to $3,950 in the Greeley area. A standard-spec job lands at $2,000 to $3,100. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for gutters in Greeley?
About $7.40 to $23.50 per linear ft for materials and labor, plus $0 to $200 for the permit if one is needed. The US range is $8 to $25.
+Is gutters cheaper in Greeley or Cheyenne?
Cheyenne is 55 miles away. The midpoint for 160 linear ft there is $2,550, which is 1% less than Greeley ($2,550). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Greeley?
About 36% at the midpoint, or $920 out of $2,550. Materials are 60% and permits 4%. Nationally, labor is 38%.
+What would average house (160 linear ft) cost in Greeley?
$1,200 to $3,950. Pick a different size in the estimator above to get your own number.
+Does gutters need a permit in Greeley?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $200 for fees in the Greeley area (our national range of $0 to $200 scaled by the local price level).
+Is Greeley expensive for gutters compared with the rest of Colorado?
Greeley is 4% below the Colorado statewide estimate ($2,700 at the midpoint). We cover 7 metros in Colorado; see the state page to compare them.
+What do sheet metal workers earn in Greeley?
The BLS median is $24.05 an hour in the Greeley area, compared with $29.71 nationally. The 25th to 75th percentile range is $22.68 to $29.28.
+What do basic and premium gutters work cost in Greeley?
For 160 linear ft, basic work runs $1,200 to $2,300 and premium work $2,850 to $3,950. Basic means: vinyl or sectional aluminum, single story. Premium means: steel or copper, two stories, custom length.
+When is the best time to install gutters in Greeley?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are February through June and August through November. February and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Gutters near Greeley
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Gutter Installation Cost? (2026) (accessed November 4, 2026)
- Home Genius Exteriors: How Much Does Gutter Installation Cost? (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus the $4-$9 per linear foot labor figure from Home Genius Exteriors.