Gutters cost in Santa Maria, CA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (160 linear ft)
- $1,400 – $4,550
- Per linear ft
- $8.80 – $27
- before permit
- Versus US midpoint
- +9%
- US $2,750
- Rank of 300 metros
- #45
- 1 = most expensive
If you want to install gutters in Santa Maria, plan on $1,400 to $4,550 for 160 linear ft, all in. Per linear ft, that is $8.80 to $27 for materials and labor, with the permit on top. The local midpoint runs 9% higher than the national one. Sheet metal workers earn a median of $33.86 an hour in the Santa Maria area, 14% above the US median of $29.71.
Estimate your gutters cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 160 linear ft in Santa Maria, CA, standard level
$2,350 to $3,600
About $14.50 to $21.50 per linear ft before permits. Labor is about 40% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,300 | $2,100 |
| Labor | $1,000 | $1,350 |
| Permits and fees | $65 | $150 |
| Total | $2,350 | $3,600 |
Cost breakdown for 160 linear ft in Santa Maria, CA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $670 | $1,700 | $2,700 | 56% |
| Labor | $730 | $1,200 | $1,650 | 40% |
| Permits and fees | $0 | $110 | $220 | 4% |
| Total | $1,400 | $3,000 | $4,550 | 100% |
What is behind the Santa Maria number
We price the labor side from BLS wage data for 3 trades: sheet metal workers at 40%, roofers at 30%, construction laborers at 30%. Weighted together, Santa Maria wages are 1.15 times the national level. Labor makes up about 40% of the midpoint estimate (38% at national prices).
On the materials line, the BEA goods price index for the Santa Maria metro is 105.2 (US = 100). The midpoint materials bill for 160 linear ft comes to $1,700, compared with $1,600 at national prices. Permit and inspection fees are scaled by the broader index (108.8) and land at $0 to $220.
Cost by quality level and size in Santa Maria
Three bands are cut from the same cited range and localized for Santa Maria wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.
Basic
$1,400 to $2,650
Vinyl or sectional aluminum, single story
Standard
$2,350 to $3,600
Seamless aluminum K-style, standard downspouts
Premium
$3,300 to $4,550
Steel or copper, two stories, custom length
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small house (120 linear ft) | $1,050 – $2,000 | $1,800 – $2,750 | $2,500 – $3,450 |
| average house (160 linear ft) | $1,400 – $2,650 | $2,350 – $3,600 | $3,300 – $4,550 |
| large house (240 linear ft) | $2,100 – $3,950 | $3,500 – $5,350 | $4,900 – $6,750 |
Santa Maria labor market for gutters
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Santa Maria is 1.15 times the national level.
For sheet metal workers (47-2211, weighted 40%) the local median is $33.86 an hour, which is 14% above the national $29.71. The middle half of them earn between $23.46 and $50.58 an hour. BLS counts 90 of them working in the area, 4.5 for every 10,000 jobs (US: 7.7), so the local bench is thinner than average.
For roofers (47-2181, weighted 30%) the local median is $29.51 an hour, which is 11% above the national $26.65. The middle half of them earn between $24.93 and $34.00 an hour. BLS counts 390 of them working in the area, 19.4 for every 10,000 jobs (US: 8.7), so the local bench is deeper than average.
Construction laborers (47-2061), 30% of the weighting: a median of $26.99 an hour, 19% above the US median of $22.66. The middle half of them earn between $22.80 and $32.79 an hour. About 1,150 work in the metro. That is 57.3 per 10,000 jobs, compared with 70.5 nationally, so expect fewer local crews to bid.
Quotes come from real crews, not medians. If the sheet metal workers on your job are paid at the 75th percentile ($50.58 an hour) instead of the median, the labor line grows by about $230. At the 25th percentile ($23.46) it shrinks by about $150. The total moves by 7.8% or 4.9%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 200,760 jobs in the Santa Maria-Santa Barbara area. That makes it the 114th largest of the 300 metros we cover, with 0.13% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Sheet metal workers (47-2211) | 40% | $23.46 | $33.86 | $50.58 | $29.71 | 1.14 | metro |
| Roofers (47-2181) | 30% | $24.93 | $29.51 | $34.00 | $26.65 | 1.11 | metro |
| Construction laborers (47-2061) | 30% | $22.80 | $26.99 | $32.79 | $22.66 | 1.19 | metro |
| Blended | 100% | 1.15 | |||||
Climate in Santa Maria: timing your gutters job
We use NOAA's 1991-2020 climate normals for Santa Maria Public Ap (5 miles from the city center). These are 30-year monthly averages, not forecasts.
Weather is not a serious constraint for exterior installation in Santa Maria: no month in the averages is cold enough (an average daytime high under 45°F) or hot enough (an average daytime high of 90°F or more) to rule it out, so the workable window is all year.
Santa Maria gets about 13 inches of precipitation in a normal year. The wettest months are January, February and March (2.9 inches in February). The station averages about 6 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 65 | 41 | 2.7 | Workable |
| Feb | 65 | 43 | 2.9 | Workable |
| Mar | 66 | 44 | 2.6 | Workable |
| Apr | 68 | 45 | 0.9 | Workable |
| May | 69 | 49 | 0.4 | Workable |
| Jun | 71 | 52 | 0.1 | Workable |
| Jul | 73 | 55 | 0.0 | Workable |
| Aug | 74 | 55 | 0.0 | Workable |
| Sep | 75 | 54 | 0.1 | Workable |
| Oct | 75 | 50 | 0.5 | Workable |
| Nov | 70 | 44 | 1.1 | Workable |
| Dec | 64 | 40 | 2.0 | Workable |
Gutters: what moves the price in Santa Maria
Material
Vinyl is $8-$12 per linear foot installed and aluminum $10-$20. Steel and copper run higher (HomeGuide).
Seamless
Seamless costs $3-$5+ more per linear foot than sectional, but has fewer places to leak.
Stories
Two-story homes add $1-$3 per linear foot for ladders and fall protection.
What nearby projects cost in Santa Maria
Because every project leans on different trades, Santa Maria's wage level does not move all prices equally. Against the US midpoint, French drain runs +19% and attic insulation +5%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $6,700 – $13,600 | +9% |
| Metal roof | 2,000 sq ft of roof | $11,200 – $35,300 | +9% |
| Vinyl siding | 2,100 sq ft of wall | $9,500 – $28,600 | +13% |
| French drain | 60 linear ft | $710 – $2,500 | +19% |
| Attic insulation | 1,000 sq ft | $1,050 – $4,200 | +5% |
How Santa Maria compares
Same job, same size (160 linear ft), priced for the nearest metros. San Luis Obispo is the priciest of the group at $3,050. Oxnard is the cheapest at $2,950.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Santa Maria, CAthis page | $1,400 – $4,550 | $3,000 | |
| Oxnard, CA55 miles | $1,400 – $4,550 | $2,950 | −1% |
| San Luis Obispo, CA65 miles | $1,450 – $4,650 | $3,050 | +3% |
| Bakersfield, CA95 miles | $1,400 – $4,550 | $3,000 | level |
| Los Angeles, CA110 miles | $1,450 – $4,650 | $3,050 | +2% |
| Visalia, CA135 miles | $1,400 – $4,550 | $2,950 | level |
| California (statewide) | $1,450 – $4,700 | $3,100 | +3% |
| United States | $1,300 – $4,200 | $2,750 | −8% |
Across 300 US metros, Santa Maria comes in at #45 from the top. The priciest is San Francisco, CA at $3,450; the cheapest is Longview, TX at $2,350 (midpoints, 160 linear ft). Statewide, Santa Maria is 3% below the California figure.
Other California metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Los Angeles, CA | 6,271,560 jobs | $1,450 – $4,650 | $3,050 | +2% |
| San Francisco, CA | 2,373,920 jobs | $1,650 – $5,200 | $3,450 | +15% |
| Riverside, CA | 1,716,760 jobs | $1,400 – $4,500 | $2,950 | −2% |
| San Diego, CA | 1,538,060 jobs | $1,450 – $4,750 | $3,100 | +4% |
| San Jose, CA | 1,134,970 jobs | $1,650 – $5,150 | $3,400 | +14% |
| Sacramento, CA | 1,080,590 jobs | $1,450 – $4,650 | $3,050 | +2% |
Cities with a workforce like Santa Maria's
Big cities and small ones price differently, so here is Santa Maria against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Springfield, MA | 201,240 jobs | $1,450 – $4,550 | $3,000 | +1% |
| Manchester, NH | 199,560 jobs | $1,250 – $4,150 | $2,700 | −9% |
| Santa Rosa, CA | 205,260 jobs | $1,450 – $4,650 | $3,050 | +2% |
| Savannah, GA | 198,360 jobs | $1,150 – $3,850 | $2,500 | −16% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,350 to $3,600 for Santa Maria, CA is attached.
Detailed gutters report for Santa Maria, CA, $9
Multi-page report for Santa Maria, CA: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Gutters in Santa Maria: your questions
+How much does it cost to install gutters in Santa Maria?
For 160 linear ft, expect $1,400 to $4,550 in the Santa Maria area. A standard-spec job lands at $2,350 to $3,600. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for gutters in Santa Maria?
About $8.80 to $27 per linear ft for materials and labor, plus $0 to $220 for the permit if one is needed. The US range is $8 to $25.
+Is gutters cheaper in Santa Maria or Oxnard?
Oxnard is 55 miles away. The midpoint for 160 linear ft there is $2,950, which is 1% less than Santa Maria ($3,000). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Santa Maria?
About 40% at the midpoint, or $1,200 out of $3,000. Materials are 56% and permits 4%. Nationally, labor is 38%.
+What would average house (160 linear ft) cost in Santa Maria?
$1,400 to $4,550. Pick a different size in the estimator above to get your own number.
+Does gutters need a permit in Santa Maria?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $220 for fees in the Santa Maria area (our national range of $0 to $200 scaled by the local price level).
+Is Santa Maria expensive for gutters compared with the rest of California?
Santa Maria is 3% below the California statewide estimate ($3,100 at the midpoint). We cover 23 metros in California; see the state page to compare them.
+What do sheet metal workers earn in Santa Maria?
The BLS median is $33.86 an hour in the Santa Maria area, compared with $29.71 nationally. The 25th to 75th percentile range is $23.46 to $50.58.
+What do basic and premium gutters work cost in Santa Maria?
For 160 linear ft, basic work runs $1,400 to $2,650 and premium work $3,300 to $4,550. Basic means: vinyl or sectional aluminum, single story. Premium means: steel or copper, two stories, custom length.
+Is there a bad season to install gutters in Santa Maria?
Not from a temperature point of view. NOAA's 1991-2020 normals show no month with a freezing-level overnight low or a 90°F-plus average high, so timing is mostly about contractor availability and rain.
Gutters near Santa Maria
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Gutter Installation Cost? (2026) (accessed November 4, 2026)
- Home Genius Exteriors: How Much Does Gutter Installation Cost? (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus the $4-$9 per linear foot labor figure from Home Genius Exteriors.