Skip to content
CostLocal

Gravel driveway cost in North Dakota

Statewide estimate from BLS wages and BEA prices. Reviewed Nov 4, 2026.

Statewide range (1,000 sq ft)
$2,500 – $10,200
Per sq ft
$2.50 – $10
before permit
Versus US midpoint
Level
US $6,350
Metros covered
2

What does it cost to install a gravel driveway in North Dakota? Plan on $2,500 to $10,200 for 1,000 sq ft. Wages (1.04x the US blend), materials (price index 95.7) and permit costs (89.0) put the state below the national midpoint by 0%.

Inside North Dakota, the metros we cover range from $6,350 (Fargo) to $6,350 (Bismarck) at the midpoint.

Estimate your gravel driveway cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Excavated base plus top course, fabric, light grading

Add-ons

Estimated cost for 1,000 sq ft in North Dakota (statewide), standard level

$4,800 to $7,850

About $4.75 to $7.75 per sq ft before permits. Labor is about 52% of the bill.

Cost breakdown
PartLowHigh
Materials$2,250$3,700
Labor$2,500$4,050
Permits and fees$55$120
Total$4,800$7,850
Save and get a PDF report

Cost breakdown for 1,000 sq ft in North Dakota

Part of the jobLowMidpointHighShare
Materials$1,150$2,950$4,80047%
Labor$1,350$3,250$5,20052%
Permits and fees$0$90$1801%
Total$2,500$6,350$10,200100%

How North Dakota compares with nearby states

North Dakota ranks 25 of 51 (the 50 states plus DC) for gravel driveway, where 1 is the most expensive. The costliest is Hawaii at $9,200 and the cheapest Arkansas at $5,400, both for 1,000 sq ft at the midpoint. North Dakota sits at $6,350. The five states closest by workforce center are listed below.

States near North Dakota, same project and size
StateDistanceRangeMidpointvs. here
South Dakota220 miles away$2,400 – $9,850$6,150−3%
Minnesota270 miles away$2,900 – $11,700$7,300+15%
Nebraska410 miles away$2,400 – $9,850$6,100−3%
Iowa450 miles away$2,450 – $9,950$6,200−2%
Wyoming500 miles away$2,450 – $10,000$6,250−1%

Quality levels and sizes in North Dakota

The cited range is cut into three overlapping bands (basic, standard and premium) and scaled to statewide North Dakota wages and prices. The grid prices the same bands at 4 common sizes.

Basic

$2,500 to $5,550

Crusher-run spread and compacted on firm ground

Standard

$4,800 to $7,850

Excavated base plus top course, fabric, light grading

Premium

$7,100 to $10,200

Deep multi-layer build, edging, culvert or drainage

Cost by size and quality level
SizeBasicStandardPremium
single car (500 sq ft)$1,250 – $2,800$2,450 – $4,000$3,600 – $5,150
two car (1,000 sq ft)$2,500 – $5,550$4,800 – $7,850$7,100 – $10,200
100 ft x 10 ft (1,000 sq ft)$2,500 – $5,550$4,800 – $7,850$7,100 – $10,200
long rural (2,000 sq ft)$5,000 – $11,100$9,550 – $15,600$14,100 – $20,100

North Dakota metro-by-metro prices

0 of the 2 metros sit above the statewide midpoint of $6,350, and the top-to-bottom gap is 0%. Each row prices the default size with that metro's own BLS wages and BEA price levels, so the gap between rows is real local variation rather than a flat markup.

MetroRange (1,000 sq ft)Midpointvs. state
Bismarck, ND$2,500 – $10,200$6,350level
Fargo, ND$2,500 – $10,200$6,350level

Related projects, priced for North Dakota

The table prices neighboring jobs at their usual sizes using statewide North Dakota wages and prices. Against national midpoints, paver patio comes out highest (+5%) and concrete slab lowest (−2%), because each job leans on different trades.

Related projects with local prices
ProjectSizeRangevs. US
Asphalt driveway600 sq ft$3,000 – $7,300−2%
Concrete driveway600 sq ft$3,600 – $9,200level
French drain60 linear ft$600 – $2,100−1%
Sod installation1,500 sq ft$1,500 – $3,250−1%
Concrete slab400 sq ft$2,400 – $5,050−2%
Paver patio300 sq ft$3,150 – $5,700+5%

Gravel driveway: what moves the price in North Dakota

  • Depth and layers

    A proper driveway is a 4-inch base plus a 2-inch top course. Each extra inch of stone adds weight in tons and money.

  • Labor share

    HomeGuide puts labor at about 50% of a gravel driveway's total cost, so a longer or harder-to-reach site moves the price more than the stone does.

  • Grading and edging

    Grading runs $1-$3 per sq ft. Edging to keep the stone in is $5-$18 per linear foot.

  • Stone is sold by weight

    Stone is priced by the ton, so every extra inch of depth or foot of width adds loads of delivery.

  • Permit

    A driveway permit is typically $50-$200 where one is needed for a new curb cut or connection; plenty of rural counties require none.

Wages behind the North Dakota number

Statewide wages come from BLS's state-level estimates, which blend big cities with small towns and rural areas. 2 trades drive the labor line for this job, and the weighted ratio against the national wage level is 1.04 for North Dakota.

Construction laborers (47-2061), 50% of the weighting: a median of $23.59 an hour, 4% above the US median of $22.66. The middle half of them earn between $21.96 and $29.17 an hour. About 5,050 work in the state. That is 117.6 per 10,000 jobs, compared with 70.5 nationally, which suggests plenty of local crews to bid.

For operating engineers and other construction equipment operators (47-2073, weighted 50%) the local median is $29.88 an hour, which is 4% above the national $28.78. The middle half of them earn between $27.97 and $36.75 an hour. BLS counts 4,890 of them working in the state, 113.9 for every 10,000 jobs (US: 30.7), so the local bench is deeper than average.

A crew paid at the 75th percentile for construction laborers ($29.17 an hour) would add about $390 to the statewide midpoint; one at the 25th percentile ($21.96) would take off about $110. Use that as a rough guide to how far a bid can sit from our midpoint on wages alone.

BLS counts 429,430 jobs across North Dakota (May 2025), which is 0.3% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Construction laborers (47-2061)50%$21.96$23.59$29.17$22.661.04state
Operating engineers and other construction equipment operators (47-2073)50%$27.97$29.88$36.75$28.781.04state
Blended100%1.04

Add-ons priced for North Dakota

Extras are quoted nationally and then scaled to North Dakota by the average of the local wage index (1.04) and goods index (0.96), a factor of 1.00. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.

Add-on prices
Add-onLocal range
Add edging (approx. 1 ft per 10 sq ft)$500 – $1,800

Weather windows across North Dakota

Season matters for gravel driveway. For each North Dakota metro below we took NOAA's 1991-2020 monthly normals from the nearest suitable station and counted comfortable months for digging and ground work.

Every North Dakota metro on the list has 6 comfortable months, though rainfall ranges from 19 inches a year in Bismarck to 24 in Fargo.

We do not adjust prices by month, because we have no reliable published data on seasonal pricing. Timing is still worth raising when you collect bids.

Climate by metro (NOAA 1991-2020 normals)
MetroJan avg low °FJul avg high °FPrecip (in/yr)Comfortable months
Fargo082246: May through October
Bismarck285196: May through October

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $4,800 to $7,850 for North Dakota is attached.

Detailed gravel driveway report for North Dakota, $9

Multi-page report for North Dakota: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Gravel driveway in North Dakota: your questions

+How much does it cost to install a gravel driveway in North Dakota?

$2,500 to $10,200 for 1,000 sq ft, using statewide wages and prices. Metro areas inside North Dakota can sit above or below that.

+Which city in North Dakota is cheapest for gravel driveway?

Fargo at about $6,350 (midpoint, 1,000 sq ft). The priciest is Bismarck at $6,350.

+Is gravel driveway cheaper in North Dakota than the US average?

It is 0% cheaper: $6,350 against $6,350 for 1,000 sq ft at the midpoint.

+What share of the price is labor in North Dakota?

About 52% ($3,250). Materials are 47%. Statewide labor for this job is weighted 1.04x the national wage level.

+What do construction laborers earn in North Dakota?

The BLS statewide median is $23.59 an hour, against $22.66 for the US. The 25th to 75th percentile range is $21.96 to $29.17.

+Where does North Dakota rank for gravel driveway costs?

25th most expensive of 51 (the 50 states plus DC) at the midpoint, $6,350 for 1,000 sq ft. Rank 1 is the costliest.

+What do basic and premium gravel driveway work cost in North Dakota?

For 1,000 sq ft, basic work runs $2,500 to $5,550 and premium work $7,100 to $10,200. Basic means: crusher-run spread and compacted on firm ground. Premium means: deep multi-layer build, edging, culvert or drainage.

+Does the season matter for gravel driveway in North Dakota?

Yes where winters or summers are hard. Of the North Dakota metros we cover, Fargo has the most comfortable months (6 of 12) based on NOAA 1991-2020 normals. Our prices do not change by month, so ask contractors whether they charge more or less in busy and slow seasons.

+What does "add edging" add in North Dakota?

$500 to $1,800 for 1,000 sq ft, from a national range scaled by the statewide wage and goods indexes.

Gravel driveway by city in North Dakota

Gravel driveway: all pricesNorth Dakota cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Installed range spans a basic spread-and-compact job ($2.50/sq ft low, CalculateGravel) to a full build with excavation ($10/sq ft high, HomeGuide). Materials low end is DIY stone ($1.20/sq ft, CalculateGravel); high end is half of HomeGuide's $10 because it says labor is about 50% of the project.