Garage door cost in Fresno, CA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (1 door)
- $740 – $3,900
- Per door
- $740 – $3,693
- before permit
- Versus US midpoint
- +5%
- US $2,200
- Rank of 300 metros
- #43
- 1 = most expensive
Local price for a garage door in the Fresno area: $740 to $3,900 for 1 door. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 5% higher than the US figure. Building materials run about 5% above the US average here (BEA goods price index 105.2).
Estimate your garage door cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 1 door in Fresno, CA, standard level
$1,700 to $2,950
About $1,626 to $2,807 per door before permits. Labor is about 30% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,100 | $1,950 |
| Labor | $540 | $840 |
| Permits and fees | $60 | $140 |
| Total | $1,700 | $2,950 |
Cost breakdown for 1 door in Fresno, CA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $420 | $1,500 | $2,650 | 66% |
| Labor | $320 | $690 | $1,050 | 30% |
| Permits and fees | $0 | $100 | $200 | 4% |
| Total | $740 | $2,300 | $3,900 | 100% |
Where the Fresno price comes from
The wage side of the estimate leans on carpenters, who do 60% of the hours on a typical job. Their local median is $30.52 an hour. Add the other trades involved and the blended wage index for Fresno is 1.06 (US = 1.00), which puts labor at 30% of the total.
Materials are scaled with BEA's regional price parity for goods. Fresno is at 105.2 against 100 for the US, so a materials line of $1,450 nationally becomes $1,500 here (midpoint, 1 door). Permits follow the all-items index of 102.2: $0 to $200.
Related projects, priced for Fresno
Jobs that often go together with garage door are priced below at their usual sizes, using the same Fresno wage and price inputs. Compared with national midpoints, concrete driveway comes out highest (+8%) and storm door lowest (+5%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Detached garage | 576 sq ft | $30,900 – $62,000 | +7% |
| Concrete driveway | 600 sq ft | $3,950 – $9,950 | +8% |
| Storm door | 1 door | $370 – $1,000 | +5% |
| Front door | 1 door | $520 – $2,650 | +5% |
| Window replacement | 10 windows | $4,750 – $15,800 | +5% |
| Patio door | 1 door | $630 – $6,300 | +5% |
Who does the work: Fresno trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Fresno the blend is 1.06.
Carpenters (47-2031), 60% of the weighting: a median of $30.52 an hour, 5% above the US median of $29.12. The middle half of them earn between $23.62 and $39.23 an hour. About 1,790 work in the metro. That is 37.5 per 10,000 jobs, compared with 43.1 nationally, so the supply of crews looks typical.
For electricians (47-2111, weighted 20%) the local median is $34.48 an hour, which is 13% above the national $30.38. The middle half of them earn between $27.48 and $45.69 an hour. BLS counts 1,980 of them working in the area, 41.5 for every 10,000 jobs (US: 48.7), so the local bench is about average.
For general maintenance and repair workers (49-9071, weighted 20%) the local median is $24.73 an hour, which is 4% above the national $23.84. The middle half of them earn between $20.67 and $30.15 an hour. BLS counts 3,590 of them working in the area, 75.3 for every 10,000 jobs (US: 98.4), so the local bench is thinner than average.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $120 to the midpoint estimate; the 25th percentile takes off about $90. That is a swing of roughly 4.0% to 5.0% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Fresno has 476,890 jobs in total (BLS, May 2025), ranking 53rd by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 60% | $23.62 | $30.52 | $39.23 | $29.12 | 1.05 | metro |
| Electricians (47-2111) | 20% | $27.48 | $34.48 | $45.69 | $30.38 | 1.13 | metro |
| General maintenance and repair workers (49-9071) | 20% | $20.67 | $24.73 | $30.15 | $23.84 | 1.04 | metro |
| Blended | 100% | 1.06 | |||||
The best months for garage door in Fresno
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Fresno Yosemite Intl Ap (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Fresno are October through May: 8 of 12. Outside them, June, July, August and September have an average daytime high of 90°F or more.
Fresno gets about 11 inches of precipitation in a normal year. The wettest months are January, February and March (2.2 inches in January). Inside the workable window, May and October are the driest, at 0.4 and 0.6 inches. The station averages about 113 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 55 | 41 | 2.2 | Workable |
| Feb | 61 | 43 | 1.9 | Workable |
| Mar | 68 | 47 | 1.9 | Workable |
| Apr | 74 | 51 | 1.0 | Workable |
| May | 83 | 58 | 0.4 | Workable |
| Jun | 91 | 64 | 0.2 | Hot |
| Jul | 98 | 69 | 0.0 | Hot |
| Aug | 97 | 68 | 0.0 | Hot |
| Sep | 91 | 63 | 0.1 | Hot |
| Oct | 79 | 55 | 0.6 | Workable |
| Nov | 65 | 45 | 0.9 | Workable |
| Dec | 55 | 40 | 1.8 | Workable |
Fresno: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Fresno. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from single door to two single doors.
Basic
$740 to $2,000
Basic single door, standard steel panels
Standard
$1,700 to $2,950
Insulated double door with windows
Premium
$2,650 to $3,900
Premium insulated or wood-look door, upgraded hardware
| Size | Basic | Standard | Premium |
|---|---|---|---|
| single door | $740 – $2,000 | $1,700 – $2,950 | $2,650 – $3,900 |
| double door | $740 – $2,000 | $1,700 – $2,950 | $2,650 – $3,900 |
| two single doors | $1,500 – $3,900 | $3,300 – $5,750 | $5,150 – $7,600 |
Extras that change the Fresno total
Add-ons start from national price ranges and are scaled by 1.06 for Fresno, which is the average of the area's wage index (1.06) and goods price index (1.05). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add a new opener (flat) | $320 – $950 |
Specs and site conditions that change a Fresno bid
Permit
Like-for-like replacement often needs no permit. Opening up the wall or adding wiring can.
Door size and style
A standard door with 4-5 rectangular panels is $400-$1,400 before installation; add windows and it's $600-$2,500 (HomeGuide).
Opener
A new opener is a separate line at $300-$900 installed.
Fresno against nearby metros and the rest of California
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 1 door range from $2,300 to $2,500 across Fresno and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Fresno, CAthis page | $740 – $3,900 | $2,300 | |
| Merced, CA60 miles | $780 – $4,050 | $2,400 | +4% |
| Visalia, CA65 miles | $730 – $3,850 | $2,300 | −1% |
| Modesto, CA85 miles | $780 – $4,050 | $2,400 | +4% |
| San Jose, CA95 miles | $820 – $4,200 | $2,500 | +8% |
| Salinas, CA100 miles | $760 – $3,950 | $2,350 | +2% |
| California (statewide) | $790 – $4,100 | $2,450 | +5% |
| United States | $700 – $3,700 | $2,200 | −5% |
Out of the 300 metros we cover, Fresno ranks #43 for the cost of this job (#1 is the most expensive). Statewide, Fresno is 5% below the California figure.
Elsewhere in California
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Los Angeles, CA | 6,271,560 jobs | $790 – $4,100 | $2,450 | +6% |
| San Francisco, CA | 2,373,920 jobs | $860 – $4,400 | $2,600 | +13% |
| Riverside, CA | 1,716,760 jobs | $750 – $3,900 | $2,300 | level |
| San Diego, CA | 1,538,060 jobs | $790 – $4,100 | $2,450 | +6% |
| San Jose, CA | 1,134,970 jobs | $820 – $4,200 | $2,500 | +8% |
| Sacramento, CA | 1,080,590 jobs | $780 – $4,050 | $2,400 | +4% |
Metros of a similar size
Big cities and small ones price differently, so here is Fresno against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Rochester, NY | 494,280 jobs | $710 – $3,700 | $2,200 | −4% |
| Tulsa, OK | 458,730 jobs | $630 – $3,350 | $2,000 | −14% |
| Omaha, NE | 498,100 jobs | $660 – $3,450 | $2,050 | −11% |
| Albany, NY | 449,410 jobs | $710 – $3,750 | $2,200 | −4% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $1,700 to $2,950 for Fresno, CA is attached.
Take this estimate with you: PDF report, $9
The report lays out the garage door numbers for Fresno, CA line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Garage door in Fresno: your questions
+How much does it cost to replace a garage door in Fresno?
For 1 door, expect $740 to $3,900 in the Fresno area. A standard-spec job lands at $1,700 to $2,950. Small jobs usually cost more per door and large ones less.
+What is the price per door for garage door in Fresno?
About $740 to $3,693 per door for materials and labor, plus $0 to $200 for the permit if one is needed. The US range is $700 to $3,500.
+Is garage door cheaper in Fresno or Merced?
Merced is 60 miles away. The midpoint for 1 door there is $2,400, which is 4% more than Fresno ($2,300). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Fresno?
About 30% at the midpoint, or $690 out of $2,300. Materials are 66% and permits 4%. Nationally, labor is 30%.
+What would double door cost in Fresno?
$740 to $3,900. Pick a different size in the estimator above to get your own number.
+Does garage door need a permit in Fresno?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $200 for fees in the Fresno area (our national range of $0 to $200 scaled by the local price level).
+Is Fresno expensive for garage door compared with the rest of California?
Fresno is 5% below the California statewide estimate ($2,450 at the midpoint). We cover 23 metros in California; see the state page to compare them.
+What do carpenters earn in Fresno?
The BLS median is $30.52 an hour in the Fresno area, compared with $29.12 nationally. The 25th to 75th percentile range is $23.62 to $39.23.
+What do basic and premium garage door work cost in Fresno?
For 1 door, basic work runs $740 to $2,000 and premium work $2,650 to $3,900. Basic means: basic single door, standard steel panels. Premium means: premium insulated or wood-look door, upgraded hardware.
+When is the best time to replace a garage door in Fresno?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are October through May. May and October are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add a new opener" add in Fresno?
$320 to $950, from a national range scaled by the local wage and goods indexes.
Garage door near Fresno
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Garage Door Replacement Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020