Front door cost in Crestview, FL
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (1 door)
- $440 – $2,350
- Per door
- $440 – $2,337
- before permit
- Versus US midpoint
- −7%
- US $1,500
- Rank of 300 metros
- #220
- 1 = most expensive
Crestview homeowners pay roughly $440 to $2,350 to replace a front door at 1 door, or $440 to $2,337 per door (permit not included). Against the US midpoint, Crestview is 7% lower. Carpenters earn a median of $23.53 an hour in the Crestview area, 19% below the US median of $29.12.
Estimate your front door cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 1 door in Crestview, FL, standard level
$1,000 to $1,750
About $1,009 to $1,768 per door before permits. Labor is about 24% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $710 | $1,400 |
| Labor | $300 | $360 |
| Permits and fees | $0 | $0 |
| Total | $1,000 | $1,750 |
Cost breakdown for 1 door in Crestview, FL
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $190 | $1,050 | $1,900 | 76% |
| Labor | $250 | $330 | $410 | 24% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $440 | $1,400 | $2,350 | 100% |
What is behind the Crestview number
Labor is 24% of the midpoint bill here, against 27% nationally. The mix of trades behind this job is carpenters (85%), general maintenance and repair workers (15%). We weight each trade's local median wage by that share and compare it with the national median. In Crestview the blended ratio comes out at 0.82.
On the materials line, the BEA goods price index for the Crestview metro is 96.2 (US = 100). The midpoint materials bill for 1 door comes to $1,050, compared with $1,100 at national prices. Permit and inspection fees are scaled by the broader index (97.0) and land at $0 to $0.
When to schedule front door in Crestview
We use NOAA's 1991-2020 climate normals for Crestview Bob Sikes Ap (5 miles from the city center). These are 30-year monthly averages, not forecasts.
September through May is the stretch where exterior installation runs into the fewest weather problems in Crestview (9 of 12 months). June, July and August have an average daytime high of 90°F or more.
Crestview gets about 64 inches of precipitation in a normal year. The wettest months are June, July and August (7.9 inches in July). Inside the workable window, May and October are the driest, at 4.1 and 4.1 inches. The station averages about 98 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 63 | 39 | 5.7 | Workable |
| Feb | 67 | 41 | 4.6 | Workable |
| Mar | 73 | 47 | 5.7 | Workable |
| Apr | 79 | 53 | 4.9 | Workable |
| May | 87 | 61 | 4.1 | Workable |
| Jun | 91 | 69 | 6.0 | Hot |
| Jul | 92 | 71 | 7.9 | Hot |
| Aug | 92 | 71 | 6.4 | Hot |
| Sep | 89 | 67 | 5.1 | Workable |
| Oct | 81 | 56 | 4.1 | Workable |
| Nov | 72 | 45 | 4.3 | Workable |
| Dec | 65 | 41 | 4.9 | Workable |
Why two Crestview quotes can differ
Door material
Basic steel doors run about $200-$600 for the door; fiberglass and wood go to $2,000 (HomeGuide).
Double doors
A double front door costs $1,500-$6,500+ installed; the doors alone are $1,200-$5,000.
Frame
Frame repair adds $75-$200+; rebuilding the opening for a new size costs $7-$20 per linear foot for framing.
Crestview: what basic, standard and premium work costs
Three bands are cut from the same cited range and localized for Crestview wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 2 common sizes.
Basic
$440 to $1,200
Basic steel door, same size opening
Standard
$1,000 to $1,750
Fiberglass door with sidelight trim or glass
Premium
$1,600 to $2,350
Wood or custom door, frame work needed
| Size | Basic | Standard | Premium |
|---|---|---|---|
| single entry door | $440 – $1,200 | $1,000 – $1,750 | $1,600 – $2,350 |
| front and side doors | $880 – $2,400 | $2,000 – $3,550 | $3,150 – $4,650 |
Local wages behind the labor line
Wages are the part of this estimate that changes most from town to town. 2 trades carry the job here, and each is compared with its US median. The weighted result for Crestview is 0.82 times the national level.
For carpenters (47-2031, weighted 85%) the local median is $23.53 an hour, which is 19% below the national $29.12. The middle half of them earn between $20.91 and $28.14 an hour. BLS counts 370 of them working in the area, 29.6 for every 10,000 jobs (US: 43.1), so the local bench is thinner than average.
General maintenance and repair workers (49-9071), 15% of the weighting: a median of $21.79 an hour, 9% below the US median of $23.84. The middle half of them earn between $18.14 and $26.37 an hour. About 1,930 work in the metro. That is 154.3 per 10,000 jobs, compared with 98.4 nationally, which suggests plenty of local crews to bid.
Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($28.14 an hour) instead of the median, the labor line grows by about $55. At the 25th percentile ($20.91) it shrinks by about $30. The total moves by 3.9% or 2.2%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 125,050 jobs in the Crestview-Fort Walton Beach-Destin area. That makes it the 172nd largest of the 300 metros we cover, with 0.08% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 85% | $20.91 | $23.53 | $28.14 | $29.12 | 0.81 | metro |
| General maintenance and repair workers (49-9071) | 15% | $18.14 | $21.79 | $26.37 | $23.84 | 0.91 | metro |
| Blended | 100% | 0.82 | |||||
What nearby projects cost in Crestview
Because every project leans on different trades, Crestview's wage level does not move all prices equally. Against the US midpoint, garage door runs −7% and patio door −10%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Storm door | 1 door | $310 – $870 | −9% |
| Patio door | 1 door | $550 – $5,350 | −10% |
| Window replacement | 10 windows | $4,100 – $13,900 | −7% |
| Garage door | 1 door | $640 – $3,450 | −7% |
Is Crestview cheap or dear? The local comparison
Same job, same size (1 door), priced for the nearest metros. Crestview is the priciest of the group. Dothan is the cheapest at $1,350.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Crestview, FLthis page | $440 – $2,350 | $1,400 | |
| Pensacola, FL50 miles | $440 – $2,350 | $1,400 | level |
| Panama City, FL50 miles | $440 – $2,350 | $1,400 | level |
| Dothan, AL70 miles | $410 – $2,300 | $1,350 | −3% |
| Daphne, AL85 miles | $430 – $2,300 | $1,350 | −1% |
| Mobile, AL110 miles | $430 – $2,350 | $1,400 | −1% |
| Florida (statewide) | $450 – $2,400 | $1,400 | +2% |
| United States | $500 – $2,500 | $1,500 | +8% |
Across 300 US metros, Crestview comes in at #220 from the top. The priciest is Honolulu, HI at $1,800; the cheapest is Brownsville, TX at $1,300 (midpoints, 1 door). Statewide, Crestview is 2% below the Florida figure.
Other Florida metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Miami, FL | 2,819,940 jobs | $470 – $2,500 | $1,500 | +7% |
| Tampa, FL | 1,447,120 jobs | $450 – $2,350 | $1,400 | +1% |
| Orlando, FL | 1,411,730 jobs | $440 – $2,350 | $1,400 | level |
| Jacksonville, FL | 765,930 jobs | $450 – $2,350 | $1,400 | +1% |
| North Port, FL | 339,940 jobs | $450 – $2,350 | $1,400 | +1% |
| Cape Coral, FL | 304,790 jobs | $440 – $2,350 | $1,400 | level |
Cities with a workforce like Crestview's
Big cities and small ones price differently, so here is Crestview against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Norwich, CT | 126,450 jobs | $510 – $2,500 | $1,500 | +8% |
| Duluth, MN | 124,710 jobs | $500 – $2,400 | $1,450 | +5% |
| Elkhart, IN | 127,730 jobs | $520 – $2,450 | $1,450 | +6% |
| Appleton, WI | 124,230 jobs | $500 – $2,400 | $1,450 | +5% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $1,000 to $1,750 for Crestview, FL is attached.
A detailed PDF report of this estimate, $9
The report lays out the front door numbers for Crestview, FL line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Front door in Crestview: your questions
+How much does it cost to replace a front door in Crestview?
For 1 door, expect $440 to $2,350 in the Crestview area. A standard-spec job lands at $1,000 to $1,750. Small jobs usually cost more per door and large ones less.
+What is the price per door for front door in Crestview?
About $440 to $2,337 per door for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $500 to $2,500.
+Is front door cheaper in Crestview or Pensacola?
Pensacola is 50 miles away. The midpoint for 1 door there is $1,400, which is 0% less than Crestview ($1,400). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Crestview?
About 24% at the midpoint, or $330 out of $1,400. Materials are 76% and permits 0%. Nationally, labor is 27%.
+What would front and side doors cost in Crestview?
$880 to $4,650. Pick a different size in the estimator above to get your own number.
+Does front door need a permit in Crestview?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Crestview area (our national range of $0 to $0 scaled by the local price level).
+Is Crestview expensive for front door compared with the rest of Florida?
Crestview is 2% below the Florida statewide estimate ($1,400 at the midpoint). We cover 19 metros in Florida; see the state page to compare them.
+What do carpenters earn in Crestview?
The BLS median is $23.53 an hour in the Crestview area, compared with $29.12 nationally. The 25th to 75th percentile range is $20.91 to $28.14.
+What do basic and premium front door work cost in Crestview?
For 1 door, basic work runs $440 to $1,200 and premium work $1,600 to $2,350. Basic means: basic steel door, same size opening. Premium means: wood or custom door, frame work needed.
+When is the best time to replace a front door in Crestview?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are September through May. May and October are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Front door near Crestview
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Front Door Replacement Cost? (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = HomeGuide's door prices, from about $200 for a basic steel door to $2,000 for higher-end fiberglass or wood.