Skip to content
CostLocal

French drain cost in Corpus Christi, TX

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (60 linear ft)
$540 – $1,900
Per linear ft
$9 – $31.50
before permit
Versus US midpoint
−10%
US $1,350
Rank of 300 metros
#255
1 = most expensive

If you want to install a French drain in Corpus Christi, plan on $540 to $1,900 for 60 linear ft, all in. Per linear ft, that is $9 to $31.50 for materials and labor, with the permit on top. The local midpoint runs 10% lower than the national one. Construction laborers earn a median of $20.40 an hour in the Corpus Christi area, 10% below the US median of $22.66.

Estimate your french drain cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Standard drain with fabric, gravel and a pop-up outlet

Estimated cost for 60 linear ft in Corpus Christi, TX, standard level

$940 to $1,500

About $15.50 to $24.50 per linear ft before permits. Labor is about 50% of the bill.

Cost breakdown
PartLowHigh
Materials$470$740
Labor$470$740
Permits and fees$0$0
Total$940$1,500
Save and get a PDF report

Cost breakdown for 60 linear ft in Corpus Christi, TX

Part of the jobLowMidpointHighShare
Materials$270$610$95050%
Labor$270$610$94050%
Permits and fees$0$0$00%
Total$540$1,200$1,900100%

Why Corpus Christi prices look the way they do

We price the labor side from BLS wage data for 3 trades: construction laborers at 50%, operating engineers and other construction equipment operators at 30%, pipelayers at 20%. Weighted together, Corpus Christi wages are 0.86 times the national level. Labor makes up about 50% of the midpoint estimate (52% at national prices).

On the materials line, the BEA goods price index for the Corpus Christi metro is 93.8 (US = 100). The midpoint materials bill for 60 linear ft comes to $610, compared with $650 at national prices. Permit and inspection fees are scaled by the broader index (92.7) and land at $0 to $0.

Climate in Corpus Christi: timing your French drain job

We use NOAA's 1991-2020 climate normals for Corpus Christi Nas (10 miles from the city center). These are 30-year monthly averages, not forecasts.

October through May is the stretch where digging, grading and setting material in the ground runs into the fewest weather problems in Corpus Christi (8 of 12 months). June, July, August and September have an average daytime high of 90°F or more.

Corpus Christi gets about 35 inches of precipitation in a normal year. The wettest months are May, September and October (6.2 inches in September). Inside the workable window, February and December are the driest, at 1.6 and 1.5 inches. The station averages about 96 days a year at 90°F or above.

Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.

Monthly normals, Corpus Christi Nas (NOAA, 1991-2020)
MonthAvg high °FAvg low °FPrecip (in)For this job
Jan68521.8Workable
Feb71561.6Workable
Mar76622.4Workable
Apr82682.5Workable
May87753.6Workable
Jun91793.5Hot
Jul92802.6Hot
Aug94802.0Hot
Sep91776.2Hot
Oct85714.7Workable
Nov77612.7Workable
Dec70541.5Workable

Planning more than one job in Corpus Christi?

Because every project leans on different trades, Corpus Christi's wage level does not move all prices equally. Against the US midpoint, sprinkler system runs −9% and gravel driveway −10%.

Related projects with local prices
ProjectSizeRangevs. US
Retaining wall200 sq ft of wall face$6,400 – $12,300−9%
Gravel driveway1,000 sq ft$2,250 – $9,150−10%
Sod installation1,500 sq ft$1,350 – $3,000−9%
Concrete slab400 sq ft$2,200 – $4,700−9%
Sprinkler system4,000 sq ft of lawn$3,650 – $9,150−9%
Inground pool450 sq ft$32,700 – $102,000−9%

How Corpus Christi compares

Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 60 linear ft range from $1,100 to $1,250 across Corpus Christi and its five closest metros.

Comparison with nearby areas
AreaRangeMidpointvs. here
Corpus Christi, TXthis page$540 – $1,900$1,200
McAllen, TX115 miles$490 – $1,750$1,100−9%
Laredo, TX120 miles$510 – $1,800$1,150−5%
Brownsville, TX125 miles$510 – $1,800$1,150−6%
San Antonio, TX130 miles$530 – $1,850$1,200−1%
Austin, TX165 miles$560 – $1,950$1,250+3%
Texas (statewide)$550 – $1,950$1,250+3%
United States$600 – $2,100$1,350+11%

Across 300 US metros, Corpus Christi comes in at #255 from the top. The priciest is San Francisco, CA at $1,900; the cheapest is McAllen, TX at $1,100 (midpoints, 60 linear ft). Statewide, Corpus Christi is 3% below the Texas figure.

Other Texas metros

Texas metros compared with Corpus Christi
MetroSizeRangeMidpointvs. here
Dallas, TX4,049,800 jobs$580 – $2,050$1,300+8%
Houston, TX3,289,720 jobs$560 – $1,950$1,250+5%
Austin, TX1,293,690 jobs$560 – $1,950$1,250+3%
San Antonio, TX1,126,880 jobs$530 – $1,850$1,200−1%
El Paso, TX339,120 jobs$510 – $1,800$1,150−6%
McAllen, TX296,700 jobs$490 – $1,750$1,100−9%

Cities with a workforce like Corpus Christi's

Big cities and small ones price differently, so here is Corpus Christi against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Modesto, CA195,230 jobs$740 – $2,600$1,650+38%
Boulder, CO192,390 jobs$620 – $2,200$1,400+16%
Savannah, GA198,360 jobs$540 – $1,900$1,200level
Wilmington, NC191,280 jobs$560 – $2,000$1,250+5%

Corpus Christi: what basic, standard and premium work costs

Three bands are cut from the same cited range and localized for Corpus Christi wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.

Basic

$540 to $1,100

Shallow yard drain, easy digging

Standard

$940 to $1,500

Standard drain with fabric, gravel and a pop-up outlet

Premium

$1,350 to $1,900

Deep or long drain, hard soil, dry well or sump discharge

Cost by size and quality level
SizeBasicStandardPremium
short run (30 linear ft)$270 – $540$470 – $740$670 – $940
side yard (60 linear ft)$540 – $1,100$940 – $1,500$1,350 – $1,900
long run (120 linear ft)$1,100 – $2,150$1,900 – $2,950$2,700 – $3,750

Specs and site conditions that change a Corpus Christi bid

  • Exterior versus interior

    A shallow exterior French drain is $10-$35 per linear foot; an interior basement drain is $40-$85 per foot, or $4,000-$17,000 installed (HomeGuide).

  • Where the water goes

    A sump pump adds $500-$1,800 and a dry well $50-$3,000+. Discharging to a storm drain can mean extra permit fees.

  • Depth and soil

    Rocky or clay soil and long trenches raise excavation time.

Corpus Christi labor market for French drain

Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Corpus Christi is 0.86 times the national level.

Construction laborers (47-2061), 50% of the weighting: a median of $20.40 an hour, 10% below the US median of $22.66. The middle half of them earn between $17.27 and $23.05 an hour. About 2,640 work in the metro. That is 137.1 per 10,000 jobs, compared with 70.5 nationally, which suggests plenty of local crews to bid.

For operating engineers and other construction equipment operators (47-2073, weighted 30%) the local median is $23.23 an hour, which is 19% below the national $28.78. The middle half of them earn between $22.12 and $28.12 an hour. BLS counts 1,160 of them working in the area, 60.2 for every 10,000 jobs (US: 30.7), so the local bench is deeper than average.

Pipelayers (47-2151), 20% of the weighting: a median of $19.99 an hour, 15% below the US median of $23.56. The middle half of them earn between $17.70 and $21.33 an hour. About 70 work in the metro. That is 3.6 per 10,000 jobs, compared with 2.1 nationally, which suggests plenty of local crews to bid.

Quotes come from real crews, not medians. If the construction laborers on your job are paid at the 75th percentile ($23.05 an hour) instead of the median, the labor line grows by about $40. At the 25th percentile ($17.27) it shrinks by about $50. The total moves by 3.4% or 4.0%, so wages alone rarely explain a quote that is far outside our range.

For context on the local economy, BLS counts 192,580 jobs in the Corpus Christi area. That makes it the 118th largest of the 300 metros we cover, with 0.12% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Construction laborers (47-2061)50%$17.27$20.40$23.05$22.660.90metro
Operating engineers and other construction equipment operators (47-2073)30%$22.12$23.23$28.12$28.780.81metro
Pipelayers (47-2151)20%$17.70$19.99$21.33$23.560.85metro
Blended100%0.86

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $940 to $1,500 for Corpus Christi, TX is attached.

Take this estimate with you: PDF report, $9

The report lays out the french drain numbers for Corpus Christi, TX line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

French drain in Corpus Christi: your questions

+How much does it cost to install a French drain in Corpus Christi?

For 60 linear ft, expect $540 to $1,900 in the Corpus Christi area. A standard-spec job lands at $940 to $1,500. Small jobs usually cost more per linear ft and large ones less.

+What is the price per linear ft for French drain in Corpus Christi?

About $9 to $31.50 per linear ft for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $10 to $35.

+Is French drain cheaper in Corpus Christi or McAllen?

McAllen is 115 miles away. The midpoint for 60 linear ft there is $1,100, which is 9% less than Corpus Christi ($1,200). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Corpus Christi?

About 50% at the midpoint, or $610 out of $1,200. Materials are 50% and permits 0%. Nationally, labor is 52%.

+What would side yard (60 linear ft) cost in Corpus Christi?

$540 to $1,900. Pick a different size in the estimator above to get your own number.

+Does French drain need a permit in Corpus Christi?

Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Corpus Christi area (our national range of $0 to $0 scaled by the local price level).

+Is Corpus Christi expensive for French drain compared with the rest of Texas?

Corpus Christi is 3% below the Texas statewide estimate ($1,250 at the midpoint). We cover 21 metros in Texas; see the state page to compare them.

+What do construction laborers earn in Corpus Christi?

The BLS median is $20.40 an hour in the Corpus Christi area, compared with $22.66 nationally. The 25th to 75th percentile range is $17.27 to $23.05.

+What do basic and premium French drain work cost in Corpus Christi?

For 60 linear ft, basic work runs $540 to $1,100 and premium work $1,350 to $1,900. Basic means: shallow yard drain, easy digging. Premium means: deep or long drain, hard soil, dry well or sump discharge.

+When is the best time to install a French drain in Corpus Christi?

Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are October through May. February and December are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.

French drain near Corpus Christi

French drain: all pricesFrench drain in TexasAll projects in Corpus ChristiTexas cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = 48% of the installed price, from Cost to Renovate's mid-range 'Outdoor Living' category split (44% labor, 48% materials). It is a category average, not a French-drain figure, so the materials line here is a rough one.