Skip to content
CostLocal

French drain cost in Idaho Falls, ID

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (60 linear ft)
$600 – $2,100
Per linear ft
$10 – $35
before permit
Versus US midpoint
+1%
US $1,350
Rank of 300 metros
#134
1 = most expensive

Idaho Falls homeowners pay roughly $600 to $2,100 to install a French drain at 60 linear ft, or $10 to $35 per linear ft (permit not included). Against the US midpoint, Idaho Falls is almost level. Construction laborers earn a median of $22.05 an hour in the Idaho Falls area, 3% below the US median of $22.66.

Estimate your french drain cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Standard drain with fabric, gravel and a pop-up outlet

Estimated cost for 60 linear ft in Idaho Falls, ID, standard level

$1,050 to $1,650

About $17.50 to $27.50 per linear ft before permits. Labor is about 54% of the bill.

Cost breakdown
PartLowHigh
Materials$480$760
Labor$570$900
Permits and fees$0$0
Total$1,050$1,650
Save and get a PDF report

Cost breakdown for 60 linear ft in Idaho Falls, ID

Part of the jobLowMidpointHighShare
Materials$280$620$97046%
Labor$330$730$1,15054%
Permits and fees$0$0$00%
Total$600$1,350$2,100100%

What is behind the Idaho Falls number

Labor is 54% of the midpoint bill here, against 52% nationally. The mix of trades behind this job is construction laborers (50%), operating engineers and other construction equipment operators (30%), pipelayers (20%). We weight each trade's local median wage by that share and compare it with the national median. In Idaho Falls the blended ratio comes out at 1.05.

On the materials line, the BEA goods price index for the Idaho Falls metro is 96.2 (US = 100). The midpoint materials bill for 60 linear ft comes to $620, compared with $650 at national prices. Permit and inspection fees are scaled by the broader index (94.4) and land at $0 to $0.

Data note: 20% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Idaho Falls. The wage table below marks each row.

How Idaho Falls compares

Same job, same size (60 linear ft), priced for the nearest metros. Bozeman is the priciest of the group at $1,400. Logan is the cheapest at $1,300.

Comparison with nearby areas
AreaRangeMidpointvs. here
Idaho Falls, IDthis page$600 – $2,100$1,350
Logan, UT125 miles$590 – $2,050$1,300−3%
Bozeman, MT145 miles$630 – $2,200$1,400+4%
Ogden, UT175 miles$590 – $2,050$1,350−2%
Boise, ID190 miles$610 – $2,100$1,350level
Salt Lake City, UT210 miles$600 – $2,100$1,350−1%
Idaho (statewide)$600 – $2,100$1,350level
United States$600 – $2,100$1,350−1%

Across 300 US metros, Idaho Falls comes in at #134 from the top. The priciest is San Francisco, CA at $1,900; the cheapest is McAllen, TX at $1,100 (midpoints, 60 linear ft). Statewide, Idaho Falls is 0% below the Idaho figure.

Other Idaho metros

Idaho metros compared with Idaho Falls
MetroSizeRangeMidpointvs. here
Boise, ID391,790 jobs$610 – $2,100$1,350level
Coeur d'Alene, ID72,280 jobs$630 – $2,200$1,400+4%

Cities with a workforce like Idaho Falls's

Big cities and small ones price differently, so here is Idaho Falls against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Hilton Head, SC81,920 jobs$560 – $2,000$1,250−6%
Johnson City, TN81,690 jobs$540 – $1,900$1,200−10%
Bowling Green, KY82,160 jobs$580 – $2,050$1,300−3%
Odessa, TX80,910 jobs$540 – $1,900$1,200−11%

When to schedule French drain in Idaho Falls

We use NOAA's 1991-2020 climate normals for Idaho Falls Fanning Fld (5 miles from the city center). These are 30-year monthly averages, not forecasts.

May through September is the stretch where digging, grading and setting material in the ground runs into the fewest weather problems in Idaho Falls (5 of 12 months). January, February, March, April, October, November and December have an average overnight low at or below freezing (32°F).

In January, February, March, April, October, November and December the average low is at or below freezing, which means frozen ground and slower digging, compaction and sod or stone placement. NOAA counts about 182 days a year with a low at or below 32°F at this station.

Idaho Falls gets about 10 inches of precipitation in a normal year. The wettest months are April, May and June (1.6 inches in May). Inside the workable window, July and August are the driest, at 0.5 and 0.6 inches. The station averages about 26 days a year at 90°F or above.

Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.

Monthly normals, Idaho Falls Fanning Fld (NOAA, 1991-2020)
MonthAvg high °FAvg low °FPrecip (in)For this job
Jan29120.7Cold
Feb34160.6Cold
Mar47250.8Cold
Apr58311.0Cold
May67381.6Workable
Jun76451.1Workable
Jul87490.5Workable
Aug86480.6Workable
Sep75411.0Workable
Oct59310.9Cold
Nov43220.7Cold
Dec30130.8Cold

Local wages behind the labor line

Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Idaho Falls is 1.05 times the national level.

Construction laborers (47-2061), 50% of the weighting: a median of $22.05 an hour, in line with the US median of $22.66. The middle half of them earn between $18.83 and $26.56 an hour. About 970 work in the metro. That is 118.5 per 10,000 jobs, compared with 70.5 nationally, which suggests plenty of local crews to bid.

For operating engineers and other construction equipment operators (47-2073, weighted 30%) the local median is $30.73 an hour, which is 7% above the national $28.78. The middle half of them earn between $24.14 and $44.52 an hour. BLS counts 470 of them working in the area, 57.4 for every 10,000 jobs (US: 30.7), so the local bench is deeper than average.

Pipelayers (47-2151) carry 20% of the labor weighting. BLS does not publish this trade for the Idaho Falls metro, so we used the Idaho statewide median: $28.20 an hour against $23.56 for the US. The middle half of them earn between $22.88 and $31.35 an hour.

Quotes come from real crews, not medians. If the construction laborers on your job are paid at the 75th percentile ($26.56 an hour) instead of the median, the labor line grows by about $70. At the 25th percentile ($18.83) it shrinks by about $50. The total moves by 5.1% or 3.7%, so wages alone rarely explain a quote that is far outside our range.

For context on the local economy, BLS counts 81,840 jobs in the Idaho Falls area. That makes it the 233rd largest of the 300 metros we cover, with 0.05% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Construction laborers (47-2061)50%$18.83$22.05$26.56$22.660.97metro
Operating engineers and other construction equipment operators (47-2073)30%$24.14$30.73$44.52$28.781.07metro
Pipelayers (47-2151)20%$22.88$28.20$31.35$23.561.20state
Blended100%1.05

Planning more than one job in Idaho Falls?

Because every project leans on different trades, Idaho Falls's wage level does not move all prices equally. Against the US midpoint, retaining wall runs +1% and sprinkler system −6%.

Related projects with local prices
ProjectSizeRangevs. US
Retaining wall200 sq ft of wall face$7,200 – $13,400+1%
Gravel driveway1,000 sq ft$2,500 – $10,100−1%
Sod installation1,500 sq ft$1,450 – $3,150−4%
Concrete slab400 sq ft$2,350 – $4,950−5%
Sprinkler system4,000 sq ft of lawn$3,750 – $9,450−6%
Inground pool450 sq ft$35,700 – $111,500−1%

Why two Idaho Falls quotes can differ

  • Crawl space drains

    A crawl space French drain is $2,000-$8,000 installed.

  • Exterior versus interior

    A shallow exterior French drain is $10-$35 per linear foot; an interior basement drain is $40-$85 per foot, or $4,000-$17,000 installed (HomeGuide).

  • Where the water goes

    A sump pump adds $500-$1,800 and a dry well $50-$3,000+. Discharging to a storm drain can mean extra permit fees.

Pick a size, pick a tier: french drain pricing in Idaho Falls

Three bands are cut from the same cited range and localized for Idaho Falls wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.

Basic

$600 to $1,200

Shallow yard drain, easy digging

Standard

$1,050 to $1,650

Standard drain with fabric, gravel and a pop-up outlet

Premium

$1,500 to $2,100

Deep or long drain, hard soil, dry well or sump discharge

Cost by size and quality level
SizeBasicStandardPremium
short run (30 linear ft)$300 – $600$530 – $830$750 – $1,050
side yard (60 linear ft)$600 – $1,200$1,050 – $1,650$1,500 – $2,100
long run (120 linear ft)$1,200 – $2,400$2,100 – $3,300$3,000 – $4,200

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $1,050 to $1,650 for Idaho Falls, ID is attached.

Detailed french drain report for Idaho Falls, ID, $9

The report lays out the french drain numbers for Idaho Falls, ID line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

French drain in Idaho Falls: your questions

+How much does it cost to install a French drain in Idaho Falls?

For 60 linear ft, expect $600 to $2,100 in the Idaho Falls area. A standard-spec job lands at $1,050 to $1,650. Small jobs usually cost more per linear ft and large ones less.

+What is the price per linear ft for French drain in Idaho Falls?

About $10 to $35 per linear ft for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $10 to $35.

+Is French drain cheaper in Idaho Falls or Logan?

Logan is 125 miles away. The midpoint for 60 linear ft there is $1,300, which is 3% less than Idaho Falls ($1,350). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Idaho Falls?

About 54% at the midpoint, or $730 out of $1,350. Materials are 46% and permits 0%. Nationally, labor is 52%.

+What would side yard (60 linear ft) cost in Idaho Falls?

$600 to $2,100. Pick a different size in the estimator above to get your own number.

+Does French drain need a permit in Idaho Falls?

Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Idaho Falls area (our national range of $0 to $0 scaled by the local price level).

+Is Idaho Falls expensive for French drain compared with the rest of Idaho?

Idaho Falls is 0% below the Idaho statewide estimate ($1,350 at the midpoint). We cover 3 metros in Idaho; see the state page to compare them.

+What do construction laborers earn in Idaho Falls?

The BLS median is $22.05 an hour in the Idaho Falls area, compared with $22.66 nationally. The 25th to 75th percentile range is $18.83 to $26.56.

+What do basic and premium French drain work cost in Idaho Falls?

For 60 linear ft, basic work runs $600 to $1,200 and premium work $1,500 to $2,100. Basic means: shallow yard drain, easy digging. Premium means: deep or long drain, hard soil, dry well or sump discharge.

+When is the best time to install a French drain in Idaho Falls?

Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are May through September. July and August are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.

French drain near Idaho Falls

French drain: all pricesFrench drain in IdahoAll projects in Idaho FallsIdaho cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = 48% of the installed price, from Cost to Renovate's mid-range 'Outdoor Living' category split (44% labor, 48% materials). It is a category average, not a French-drain figure, so the materials line here is a rough one.