French drain cost in Naples, FL
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (60 linear ft)
- $570 – $2,000
- Per linear ft
- $9.50 – $33.50
- before permit
- Versus US midpoint
- −5%
- US $1,350
- Rank of 300 metros
- #191
- 1 = most expensive
Naples homeowners pay roughly $570 to $2,000 to install a French drain at 60 linear ft, or $9.50 to $33.50 per linear ft (permit not included). Against the US midpoint, Naples is 5% lower. Construction laborers earn a median of $22.13 an hour in the Naples area, 2% below the US median of $22.66.
Estimate your french drain cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 60 linear ft in Naples, FL, standard level
$1,000 to $1,550
About $16.50 to $26 per linear ft before permits. Labor is about 51% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $490 | $760 |
| Labor | $510 | $810 |
| Permits and fees | $0 | $0 |
| Total | $1,000 | $1,550 |
Cost breakdown for 60 linear ft in Naples, FL
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $280 | $620 | $970 | 49% |
| Labor | $290 | $660 | $1,050 | 51% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $570 | $1,300 | $2,000 | 100% |
Where the Naples price comes from
The wage side of the estimate leans on construction laborers, who do 50% of the hours on a typical job. Their local median is $22.13 an hour. Add the other trades involved and the blended wage index for Naples is 0.94 (US = 1.00), which puts labor at 51% of the total.
On the materials line, the BEA goods price index for the Naples metro is 96.2 (US = 100). The midpoint materials bill for 60 linear ft comes to $620, compared with $650 at national prices. Permit and inspection fees are scaled by the broader index (103.2) and land at $0 to $0.
Naples against nearby metros and the rest of Florida
Same job, same size (60 linear ft), priced for the nearest metros. Miami is the priciest of the group at $1,350. Port St. Lucie is the cheapest at $1,250.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Naples, FLthis page | $570 – $2,000 | $1,300 | |
| Cape Coral, FL45 miles | $560 – $1,950 | $1,250 | −2% |
| Miami, FL55 miles | $590 – $2,050 | $1,350 | +4% |
| Punta Gorda, FL65 miles | $560 – $2,000 | $1,250 | −1% |
| Port St. Lucie, FL95 miles | $560 – $1,950 | $1,250 | −3% |
| North Port, FL105 miles | $560 – $2,000 | $1,250 | −1% |
| Florida (statewide) | $570 – $2,000 | $1,250 | −1% |
| United States | $600 – $2,100 | $1,350 | +5% |
Across 300 US metros, Naples comes in at #191 from the top. The priciest is San Francisco, CA at $1,900; the cheapest is McAllen, TX at $1,100 (midpoints, 60 linear ft). Statewide, Naples is 1% above the Florida figure.
Other Florida metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Miami, FL | 2,819,940 jobs | $590 – $2,050 | $1,350 | +4% |
| Tampa, FL | 1,447,120 jobs | $560 – $1,950 | $1,250 | −2% |
| Orlando, FL | 1,411,730 jobs | $550 – $1,950 | $1,250 | −3% |
| Jacksonville, FL | 765,930 jobs | $560 – $1,950 | $1,250 | −2% |
| North Port, FL | 339,940 jobs | $560 – $2,000 | $1,250 | −1% |
| Cape Coral, FL | 304,790 jobs | $560 – $1,950 | $1,250 | −2% |
Cities with a workforce like Naples's
Big cities and small ones price differently, so here is Naples against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Green Bay, WI | 174,550 jobs | $690 – $2,400 | $1,550 | +20% |
| Mobile, AL | 172,550 jobs | $530 – $1,850 | $1,200 | −7% |
| Reading, PA | 174,670 jobs | $600 – $2,100 | $1,350 | +5% |
| Visalia, CA | 171,140 jobs | $650 – $2,300 | $1,450 | +14% |
Local wages behind the labor line
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Naples is 0.94 times the national level.
Construction laborers (47-2061), 50% of the weighting: a median of $22.13 an hour, in line with the US median of $22.66. The middle half of them earn between $18.77 and $24.00 an hour. About 2,340 work in the metro. That is 134.6 per 10,000 jobs, compared with 70.5 nationally, which suggests plenty of local crews to bid.
For operating engineers and other construction equipment operators (47-2073, weighted 30%) the local median is $24.54 an hour, which is 15% below the national $28.78. The middle half of them earn between $23.10 and $28.40 an hour. BLS counts 680 of them working in the area, 39.1 for every 10,000 jobs (US: 30.7), so the local bench is deeper than average.
Pipelayers (47-2151), 20% of the weighting: a median of $23.18 an hour, in line with the US median of $23.56. The middle half of them earn between $23.18 and $23.80 an hour. About 130 work in the metro. That is 7.5 per 10,000 jobs, compared with 2.1 nationally, which suggests plenty of local crews to bid.
Quotes come from real crews, not medians. If the construction laborers on your job are paid at the 75th percentile ($24.00 an hour) instead of the median, the labor line grows by about $30. At the 25th percentile ($18.77) it shrinks by about $50. The total moves by 2.3% or 4.1%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 173,880 jobs in the Naples-Marco Island area. That makes it the 134th largest of the 300 metros we cover, with 0.11% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Construction laborers (47-2061) | 50% | $18.77 | $22.13 | $24.00 | $22.66 | 0.98 | metro |
| Operating engineers and other construction equipment operators (47-2073) | 30% | $23.10 | $24.54 | $28.40 | $28.78 | 0.85 | metro |
| Pipelayers (47-2151) | 20% | $23.18 | $23.18 | $23.80 | $23.56 | 0.98 | metro |
| Blended | 100% | 0.94 | |||||
Planning more than one job in Naples?
Because every project leans on different trades, Naples's wage level does not move all prices equally. Against the US midpoint, sod installation runs −2% and concrete slab −6%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Retaining wall | 200 sq ft of wall face | $6,700 – $12,800 | −5% |
| Gravel driveway | 1,000 sq ft | $2,350 – $9,600 | −6% |
| Sod installation | 1,500 sq ft | $1,450 – $3,250 | −2% |
| Concrete slab | 400 sq ft | $2,300 – $4,900 | −6% |
| Sprinkler system | 4,000 sq ft of lawn | $3,750 – $9,400 | −6% |
| Inground pool | 450 sq ft | $34,100 – $106,500 | −6% |
French drain: what moves the price in Naples
Exterior versus interior
A shallow exterior French drain is $10-$35 per linear foot; an interior basement drain is $40-$85 per foot, or $4,000-$17,000 installed (HomeGuide).
Where the water goes
A sump pump adds $500-$1,800 and a dry well $50-$3,000+. Discharging to a storm drain can mean extra permit fees.
Depth and soil
Rocky or clay soil and long trenches raise excavation time.
When to schedule French drain in Naples
We use NOAA's 1991-2020 climate normals for Naples Muni Ap (in the city). These are 30-year monthly averages, not forecasts.
October through May is the stretch where digging, grading and setting material in the ground runs into the fewest weather problems in Naples (8 of 12 months). June, July, August and September have an average daytime high of 90°F or more.
Naples gets about 50 inches of precipitation in a normal year. The wettest months are July, August and September (8.9 inches in August). Inside the workable window, November and December are the driest, at 1.4 and 1.3 inches. The station averages about 103 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 75 | 56 | 1.7 | Workable |
| Feb | 77 | 58 | 1.4 | Workable |
| Mar | 80 | 61 | 1.9 | Workable |
| Apr | 84 | 66 | 2.5 | Workable |
| May | 88 | 70 | 2.8 | Workable |
| Jun | 90 | 74 | 7.4 | Hot |
| Jul | 91 | 76 | 7.8 | Hot |
| Aug | 91 | 76 | 8.9 | Hot |
| Sep | 90 | 75 | 8.6 | Hot |
| Oct | 87 | 71 | 3.9 | Workable |
| Nov | 81 | 63 | 1.4 | Workable |
| Dec | 77 | 59 | 1.3 | Workable |
Naples: what basic, standard and premium work costs
Three bands are cut from the same cited range and localized for Naples wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.
Basic
$570 to $1,150
Shallow yard drain, easy digging
Standard
$1,000 to $1,550
Standard drain with fabric, gravel and a pop-up outlet
Premium
$1,450 to $2,000
Deep or long drain, hard soil, dry well or sump discharge
| Size | Basic | Standard | Premium |
|---|---|---|---|
| short run (30 linear ft) | $290 – $570 | $500 – $780 | $710 – $1,000 |
| side yard (60 linear ft) | $570 – $1,150 | $1,000 – $1,550 | $1,450 – $2,000 |
| long run (120 linear ft) | $1,150 – $2,300 | $2,000 – $3,150 | $2,850 – $4,000 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $1,000 to $1,550 for Naples, FL is attached.
A detailed PDF report of this estimate, $9
Multi-page report for Naples, FL: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
French drain in Naples: your questions
+How much does it cost to install a French drain in Naples?
For 60 linear ft, expect $570 to $2,000 in the Naples area. A standard-spec job lands at $1,000 to $1,550. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for French drain in Naples?
About $9.50 to $33.50 per linear ft for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $10 to $35.
+Is French drain cheaper in Naples or Cape Coral?
Cape Coral is 45 miles away. The midpoint for 60 linear ft there is $1,250, which is 2% less than Naples ($1,300). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Naples?
About 51% at the midpoint, or $660 out of $1,300. Materials are 49% and permits 0%. Nationally, labor is 52%.
+What would side yard (60 linear ft) cost in Naples?
$570 to $2,000. Pick a different size in the estimator above to get your own number.
+Does French drain need a permit in Naples?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Naples area (our national range of $0 to $0 scaled by the local price level).
+Is Naples expensive for French drain compared with the rest of Florida?
Naples is 1% above the Florida statewide estimate ($1,250 at the midpoint). We cover 19 metros in Florida; see the state page to compare them.
+What do construction laborers earn in Naples?
The BLS median is $22.13 an hour in the Naples area, compared with $22.66 nationally. The 25th to 75th percentile range is $18.77 to $24.00.
+What do basic and premium French drain work cost in Naples?
For 60 linear ft, basic work runs $570 to $1,150 and premium work $1,450 to $2,000. Basic means: shallow yard drain, easy digging. Premium means: deep or long drain, hard soil, dry well or sump discharge.
+When is the best time to install a French drain in Naples?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are October through May. November and December are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
French drain near Naples
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a French Drain Cost? (2026) (accessed November 4, 2026)
- Cost to Renovate: Renovation Labor Report 2026: Where the Money Goes (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = 48% of the installed price, from Cost to Renovate's mid-range 'Outdoor Living' category split (44% labor, 48% materials). It is a category average, not a French-drain figure, so the materials line here is a rough one.