Concrete patio cost in Tulsa, OK
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (300 sq ft)
- $1,150 – $3,500
- Per sq ft
- $3.60 – $10.50
- before permit
- Versus US midpoint
- −12%
- US $2,650
- Rank of 300 metros
- #255
- 1 = most expensive
If you want to pour a concrete patio in Tulsa, plan on $1,150 to $3,500 for 300 sq ft, all in. Per sq ft, that is $3.60 to $10.50 for materials and labor, with the permit on top. The local midpoint runs 12% lower than the national one. Cement masons and concrete finishers earn a median of $22.19 an hour in the Tulsa area, 19% below the US median of $27.41.
Estimate your concrete patio cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 300 sq ft in Tulsa, OK, standard level
$1,850 to $2,800
About $5.65 to $8.45 per sq ft before permits. Labor is about 49% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $870 | $1,100 |
| Labor | $830 | $1,450 |
| Permits and fees | $140 | $260 |
| Total | $1,850 | $2,800 |
Cost breakdown for 300 sq ft in Tulsa, OK
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $700 | $980 | $1,250 | 43% |
| Labor | $380 | $1,150 | $1,900 | 49% |
| Permits and fees | $45 | $200 | $360 | 9% |
| Total | $1,150 | $2,300 | $3,500 | 100% |
What is behind the Tulsa number
Labor is 49% of the midpoint bill here, against 51% nationally. The mix of trades behind this job is cement masons and concrete finishers (50%), construction laborers (30%), carpenters (10%), operating engineers and other construction equipment operators (10%). We weight each trade's local median wage by that share and compare it with the national median. In Tulsa the blended ratio comes out at 0.84.
On the materials line, the BEA goods price index for the Tulsa metro is 93.8 (US = 100). The midpoint materials bill for 300 sq ft comes to $980, compared with $1,050 at national prices. Permit and inspection fees are scaled by the broader index (89.2) and land at $45 to $360.
Climate in Tulsa: timing your concrete patio job
We use NOAA's 1991-2020 climate normals for Tulsa Intl Ap (5 miles from the city center). These are 30-year monthly averages, not forecasts.
March through June and September through October are the stretches where pouring concrete runs into the fewest weather problems in Tulsa (6 of 12 months). January, February, November and December have an average overnight low of 40°F or below; July and August have an average daytime high of 90°F or more.
The 40°F line is a deliberately cautious stand-in. The American Concrete Institute's cold-weather guide (ACI 306R-16) defines cold-weather concreting around an average daily air temperature below 40°F, which is colder than our test of an average overnight low at or below 40°F, so we flag a few extra shoulder months. In cold weather crews may need heated enclosures, insulating blankets or accelerated mixes, and those measures can raise a quote.
Heat matters for concrete as well. With average highs of 90°F or more in July and August, crews often start early, wet the base and plan for faster set times.
Tulsa gets about 41 inches of precipitation in a normal year, including roughly 9 inches of snow. The wettest months are April, May and June (5.7 inches in May). Inside the workable window, March and October are the driest, at 3.1 and 3.8 inches. The station averages about 74 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 49 | 28 | 1.6 | Cold |
| Feb | 54 | 32 | 1.6 | Cold |
| Mar | 63 | 41 | 3.1 | Workable |
| Apr | 72 | 50 | 4.4 | Workable |
| May | 80 | 60 | 5.7 | Workable |
| Jun | 88 | 69 | 4.7 | Workable |
| Jul | 94 | 73 | 3.8 | Hot |
| Aug | 93 | 72 | 3.4 | Hot |
| Sep | 85 | 63 | 3.9 | Workable |
| Oct | 74 | 51 | 3.8 | Workable |
| Nov | 61 | 39 | 2.7 | Cold |
| Dec | 51 | 31 | 2.4 | Cold |
Specs and site conditions that change a Tulsa bid
Size
Small patios carry fixed costs for forms and mobilization, so the per-square-foot price drops as the patio gets bigger.
Permit
Permits run $50-$400 where required. Many cities don't require one for a small at-grade patio.
Finish
Plain concrete is $4-$12 per sq ft and a broom finish $6-$13; designs with several colors and decorative finishes run up to about $28 (HomeGuide).
Tulsa labor market for concrete patio
Wages are the part of this estimate that changes most from town to town. 4 trades carry the job here, and each is compared with its US median. The weighted result for Tulsa is 0.84 times the national level.
For cement masons and concrete finishers (47-2051, weighted 50%) the local median is $22.19 an hour, which is 19% below the national $27.41. The middle half of them earn between $19.29 and $23.28 an hour. BLS counts 1,140 of them working in the area, 24.9 for every 10,000 jobs (US: 13.3), so the local bench is deeper than average.
Construction laborers (47-2061), 30% of the weighting: a median of $20.77 an hour, 8% below the US median of $22.66. The middle half of them earn between $18.11 and $23.29 an hour. About 3,990 work in the metro. That is 87.0 per 10,000 jobs, compared with 70.5 nationally, which suggests plenty of local crews to bid.
For carpenters (47-2031, weighted 10%) the local median is $22.51 an hour, which is 23% below the national $29.12. The middle half of them earn between $20.30 and $25.03 an hour. BLS counts 1,320 of them working in the area, 28.8 for every 10,000 jobs (US: 43.1), so the local bench is thinner than average.
For operating engineers and other construction equipment operators (47-2073, weighted 10%) the local median is $23.28 an hour, which is 19% below the national $28.78. The middle half of them earn between $21.83 and $27.29 an hour. BLS counts 1,530 of them working in the area, 33.4 for every 10,000 jobs (US: 30.7), so the local bench is about average.
Quotes come from real crews, not medians. If the cement masons and concrete finishers on your job are paid at the 75th percentile ($23.28 an hour) instead of the median, the labor line grows by about $25. At the 25th percentile ($19.29) it shrinks by about $70. The total moves by 1.2% or 3.1%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 458,730 jobs in the Tulsa area. That makes it the 54th largest of the 300 metros we cover, with 0.30% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Cement masons and concrete finishers (47-2051) | 50% | $19.29 | $22.19 | $23.28 | $27.41 | 0.81 | metro |
| Construction laborers (47-2061) | 30% | $18.11 | $20.77 | $23.29 | $22.66 | 0.92 | metro |
| Carpenters (47-2031) | 10% | $20.30 | $22.51 | $25.03 | $29.12 | 0.77 | metro |
| Operating engineers and other construction equipment operators (47-2073) | 10% | $21.83 | $23.28 | $27.29 | $28.78 | 0.81 | metro |
| Blended | 100% | 0.84 | |||||
Add-ons priced for Tulsa
Extras are quoted nationally and then scaled to Tulsa by the average of the local wage index (0.84) and goods index (0.94), a factor of 0.89. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add an acid or water-based stain | $800 – $2,650 |
Related projects, priced for Tulsa
Because every project leans on different trades, Tulsa's wage level does not move all prices equally. Against the US midpoint, paver patio runs −7% and concrete driveway −13%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Concrete slab | 400 sq ft | $2,200 – $4,650 | −11% |
| Stamped concrete | 400 sq ft | $2,900 – $7,050 | −11% |
| Paver patio | 300 sq ft | $2,800 – $5,050 | −7% |
| Wood deck | 300 sq ft | $6,650 – $13,300 | −12% |
| Concrete driveway | 600 sq ft | $3,200 – $7,950 | −13% |
| Asphalt driveway | 600 sq ft | $2,800 – $6,700 | −9% |
Tulsa against nearby metros and the rest of Oklahoma
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 300 sq ft range from $2,150 to $2,500 across Tulsa and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Tulsa, OKthis page | $1,150 – $3,500 | $2,300 | |
| Oklahoma City, OK95 miles | $1,100 – $3,500 | $2,300 | −1% |
| Joplin, MO110 miles | $1,200 – $3,800 | $2,500 | +8% |
| Wichita, KS110 miles | $1,150 – $3,550 | $2,350 | +1% |
| Fort Smith, AR110 miles | $1,050 – $3,200 | $2,150 | −7% |
| Fayetteville, AR115 miles | $1,100 – $3,500 | $2,300 | level |
| Oklahoma (statewide) | $1,100 – $3,450 | $2,250 | −2% |
| United States | $1,250 – $4,000 | $2,650 | +13% |
Across 300 US metros, Tulsa comes in at #255 from the top. The priciest is Kahului, HI at $3,800; the cheapest is McAllen, TX at $2,100 (midpoints, 300 sq ft). Statewide, Tulsa is 2% above the Oklahoma figure.
Other Oklahoma metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Oklahoma City, OK | 677,680 jobs | $1,100 – $3,500 | $2,300 | −1% |
Cities with a workforce like Tulsa's
Big cities and small ones price differently, so here is Tulsa against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Fresno, CA | 476,890 jobs | $1,350 – $4,300 | $2,800 | +21% |
| Albany, NY | 449,410 jobs | $1,300 – $4,300 | $2,800 | +21% |
| Rochester, NY | 494,280 jobs | $1,300 – $4,150 | $2,700 | +17% |
| Honolulu, HI | 446,380 jobs | $1,650 – $5,750 | $3,700 | +60% |
Pick a size, pick a tier: concrete patio pricing in Tulsa
Three bands are cut from the same cited range and localized for Tulsa wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.
Basic
$1,150 to $2,100
Plain gray slab, broom finish, flat yard
Standard
$1,850 to $2,800
Colored or stained, saw-cut joints, minor grading
Premium
$2,550 to $3,500
Exposed aggregate or heavy decorative finish, drainage work
| Size | Basic | Standard | Premium |
|---|---|---|---|
| 10x10 (100 sq ft) | $400 – $810 | $710 – $1,100 | $1,000 – $1,400 |
| 12x16 (192 sq ft) | $740 – $1,400 | $1,250 – $1,900 | $1,700 – $2,350 |
| 20x20 (400 sq ft) | $1,500 – $2,700 | $2,400 – $3,650 | $3,350 – $4,550 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $1,850 to $2,800 for Tulsa, OK is attached.
Take this estimate with you: PDF report, $9
Multi-page report for Tulsa, OK: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Concrete patio in Tulsa: your questions
+How much does it cost to pour a concrete patio in Tulsa?
For 300 sq ft, expect $1,150 to $3,500 in the Tulsa area. A standard-spec job lands at $1,850 to $2,800. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for concrete patio in Tulsa?
About $3.60 to $10.50 per sq ft for materials and labor, plus $45 to $360 for the permit if one is needed. The US range is $4 to $12.
+Is concrete patio cheaper in Tulsa or Oklahoma City?
Oklahoma City is 95 miles away. The midpoint for 300 sq ft there is $2,300, which is 1% less than Tulsa ($2,300). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Tulsa?
About 49% at the midpoint, or $1,150 out of $2,300. Materials are 43% and permits 9%. Nationally, labor is 51%.
+What would 12x16 (192 sq ft) cost in Tulsa?
$740 to $2,350. Pick a different size in the estimator above to get your own number.
+Does concrete patio need a permit in Tulsa?
Often, but rules are set by your city or county building office, so call before you hire. Budget $45 to $360 for fees in the Tulsa area (our national range of $50 to $400 scaled by the local price level).
+Is Tulsa expensive for concrete patio compared with the rest of Oklahoma?
Tulsa is 2% above the Oklahoma statewide estimate ($2,250 at the midpoint). We cover 2 metros in Oklahoma; see the state page to compare them.
+What do cement masons and concrete finishers earn in Tulsa?
The BLS median is $22.19 an hour in the Tulsa area, compared with $27.41 nationally. The 25th to 75th percentile range is $19.29 to $23.28.
+What do basic and premium concrete patio work cost in Tulsa?
For 300 sq ft, basic work runs $1,150 to $2,100 and premium work $2,550 to $3,500. Basic means: plain gray slab, broom finish, flat yard. Premium means: exposed aggregate or heavy decorative finish, drainage work.
+When is the best time to pour a concrete patio in Tulsa?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through June and September through October. March and October are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add an acid or water-based stain" add in Tulsa?
$800 to $2,650 for 300 sq ft, from a national range scaled by the local wage and goods indexes.
Concrete patio near Tulsa
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Concrete Patio Cost? (2026) (accessed November 4, 2026)
- SimplyWise: Concrete Estimate Template: Free PDF + Excel (2026) (accessed November 4, 2026)
- HomeGuide: How Much Does Stamped Concrete Cost? (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = SimplyWise's sample 200 sq ft broom-finish patio line ($500-$900 in materials) divided by 200 sq ft.