Concrete driveway cost in Dayton, OH

Specs and site conditions that change a Dayton bid

• Grading and drainage

  Professional grading runs $3-$8 per sq ft or $700-$2,500 for a typical job. A sloped lot or poor soil raises it.

• Finish

  Decorative driveways run $10-$25 per sq ft installed: colors and borders at $10-$15, stamped patterns at $15-$20, and high-end finishes at $20-$25+ (HomeGuide).

• Permits and the apron

  A driveway permit is typically $50-$200 and is often required for new work. The apron where the driveway meets the street can need a separate right-of-way permit.

Dayton weather and the concrete driveway calendar

Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Dayton Mcd (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.

For pouring concrete, the comfortable months in Dayton are April through October: 7 of 12. Outside them, January, February, March, November and December have an average overnight low of 40°F or below.

The 40°F line is a deliberately cautious stand-in. The American Concrete Institute's cold-weather guide (ACI 306R-16) defines cold-weather concreting around an average daily air temperature below 40°F, which is colder than our test of an average overnight low at or below 40°F, so we flag a few extra shoulder months. In cold weather crews may need heated enclosures, insulating blankets or accelerated mixes, and those measures can raise a quote.

Dayton gets about 42 inches of precipitation in a normal year, including roughly 12 inches of snow. The wettest months are April, May and June (4.5 inches in April). Inside the workable window, September and October are the driest, at 3.0 and 3.0 inches. The station averages about 39 days a year at 90°F or above.

We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.

Dayton: what basic, standard and premium work costs

The cited range is split into basic, standard and premium bands, then scaled to Dayton. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from 1-car (12x20), 240 sq ft to 3-car (900 sq ft).

Add-ons priced for Dayton

Add-ons start from national price ranges and are scaled by 1.01 for Dayton, which is the average of the area's wage index (1.09) and goods price index (0.94). The estimator above can add them to your total.

What local crews earn in Dayton

The labor line is built from BLS wage data, one trade at a time. This job draws on 4 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Dayton the blend is 1.09.

Cement masons and concrete finishers (47-2051), 50% of the weighting: a median of $30.09 an hour, 10% above the US median of $27.41. The middle half of them earn between $23.64 and $37.19 an hour. About 260 work in the metro. That is 7.0 per 10,000 jobs, compared with 13.3 nationally, so expect fewer local crews to bid.

For construction laborers (47-2061, weighted 30%) the local median is $25.48 an hour, which is 12% above the national $22.66. The middle half of them earn between $22.00 and $35.00 an hour. BLS counts 1,390 of them working in the area, 37.3 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.

Operating engineers and other construction equipment operators (47-2073), 10% of the weighting: a median of $30.79 an hour, 7% above the US median of $28.78. The middle half of them earn between $25.96 and $40.96 an hour. About 710 work in the metro. That is 19.1 per 10,000 jobs, compared with 30.7 nationally, so expect fewer local crews to bid.

Carpenters (47-2031), 10% of the weighting: a median of $28.04 an hour, 4% below the US median of $29.12. The middle half of them earn between $23.03 and $31.60 an hour. About 950 work in the metro. That is 25.5 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.

A quick sensitivity check: moving the lead trade (cement masons and concrete finishers) from the median to the 75th percentile wage adds about $570 to the midpoint estimate; the 25th percentile takes off about $520. That is a swing of roughly 7.8% to 8.5% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.

Dayton-Kettering-Beavercreek has 372,660 jobs in total (BLS, May 2025), ranking 70th by size among the 300 metros on this site.

Planning more than one job in Dayton?

Jobs that often go together with concrete driveway are priced below at their usual sizes, using the same Dayton wage and price inputs. Compared with national midpoints, paver patio comes out highest (+2%) and asphalt driveway lowest (−2%); the gap comes from the trades each job uses.

Is Dayton cheap or dear? The local comparison

Of the five closest metros, 2 are cheaper than Dayton. Lexington is the lowest at about $6,050 (midpoint, 600 sq ft), 120 miles away.

Out of the 300 metros we cover, Dayton ranks #99 for the cost of this job (#1 is the most expensive). Statewide, Dayton is 2% below the Ohio figure.

Elsewhere in Ohio

Metros of a similar size

Big cities and small ones price differently, so here is Dayton against the 4 metros with the closest total employment.