Composite deck cost in Racine, WI
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (300 sq ft)
- $12,000 – $24,100
- Per sq ft
- $40 – $79.50
- before permit
- Versus US midpoint
- Level
- US $18,100
- Rank of 300 metros
- #106
- 1 = most expensive
Local price for a composite deck in the Racine area: $12,000 to $24,100 for 300 sq ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint lands close to the US figure. Building materials run about 6% below the US average here (BEA goods price index 93.8).
Estimate your composite deck cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 300 sq ft in Racine, WI, standard level
$15,600 to $20,400
About $52 to $67.50 per sq ft before permits. Labor is about 62% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $5,850 | $7,650 |
| Labor | $9,700 | $12,700 |
| Permits and fees | $75 | $120 |
| Total | $15,600 | $20,400 |
Cost breakdown for 300 sq ft in Racine, WI
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $4,500 | $6,750 | $9,000 | 37% |
| Labor | $7,450 | $11,200 | $14,900 | 62% |
| Permits and fees | $50 | $95 | $140 | 1% |
| Total | $12,000 | $18,000 | $24,100 | 100% |
What is behind the Racine number
Labor is 62% of the midpoint bill here, against 60% nationally. The mix of trades behind this job is carpenters (80%), construction laborers (20%). We weight each trade's local median wage by that share and compare it with the national median. In Racine the blended ratio comes out at 1.04.
Materials are scaled with BEA's regional price parity for goods. Racine is at 93.8 against 100 for the US, so a materials line of $7,200 nationally becomes $6,750 here (midpoint, 300 sq ft). Permits follow the all-items index of 96.0: $50 to $140.
Who does the work: Racine trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Racine the blend is 1.04.
Carpenters (47-2031), 80% of the weighting: a median of $29.29 an hour, in line with the US median of $29.12. The middle half of them earn between $24.17 and $40.84 an hour. About 320 work in the metro. That is 42.0 per 10,000 jobs, compared with 43.1 nationally, so the supply of crews looks typical.
For construction laborers (47-2061, weighted 20%) the local median is $26.11 an hour, which is 15% above the national $22.66. The middle half of them earn between $21.83 and $33.66 an hour. BLS counts 540 of them working in the area, 70.8 for every 10,000 jobs (US: 70.5), so the local bench is about average.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $3,450 to the midpoint estimate; the 25th percentile takes off about $1,500. That is a swing of roughly 8.4% to 19.0% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Racine-Mount Pleasant has 76,280 jobs in total (BLS, May 2025), ranking 243rd by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 80% | $24.17 | $29.29 | $40.84 | $29.12 | 1.01 | metro |
| Construction laborers (47-2061) | 20% | $21.83 | $26.11 | $33.66 | $22.66 | 1.15 | metro |
| Blended | 100% | 1.04 | |||||
How Racine compares
Same job, same size (300 sq ft), priced for the nearest metros. Chicago is the priciest of the group at $22,100.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Racine, WIthis page | $12,000 – $24,100 | $18,000 | |
| Milwaukee, WI10 miles | $12,400 – $24,800 | $18,600 | +3% |
| Kenosha, WI15 miles | $12,400 – $24,800 | $18,600 | +3% |
| Sheboygan, WI65 miles | $12,200 – $24,500 | $18,400 | +2% |
| Janesville, WI65 miles | $13,400 – $26,900 | $20,200 | +12% |
| Chicago, IL70 miles | $14,700 – $29,500 | $22,100 | +23% |
| Wisconsin (statewide) | $12,200 – $24,400 | $18,300 | +1% |
| United States | $12,100 – $24,200 | $18,100 | level |
Out of the 300 metros we cover, Racine ranks #106 for the cost of this job (#1 is the most expensive). Statewide, Racine is 1% below the Wisconsin figure.
Elsewhere in Wisconsin
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Milwaukee, WI | 820,780 jobs | $12,400 – $24,800 | $18,600 | +3% |
| Madison, WI | 408,070 jobs | $12,300 – $24,700 | $18,500 | +3% |
| Green Bay, WI | 174,550 jobs | $12,000 – $24,000 | $18,000 | level |
| Appleton, WI | 124,230 jobs | $12,300 – $24,600 | $18,500 | +2% |
| Oshkosh, WI | 93,750 jobs | $14,100 – $28,300 | $21,200 | +18% |
| Eau Claire, WI | 86,060 jobs | $11,900 – $23,900 | $17,900 | level |
Metros of a similar size
Big cities and small ones price differently, so here is Racine against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Napa, CA | 77,860 jobs | $14,600 – $29,200 | $21,900 | +22% |
| Warner Robins, GA | 76,050 jobs | $10,300 – $20,700 | $15,500 | −14% |
| Chico, CA | 78,220 jobs | $13,600 – $27,300 | $20,500 | +14% |
| Kenosha, WI | 75,450 jobs | $12,400 – $24,800 | $18,600 | +3% |
Pick a size, pick a tier: composite deck pricing in Racine
The cited range is split into basic, standard and premium bands, then scaled to Racine. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from 10x12 (120 sq ft) to 20x20 (400 sq ft).
Basic
$12,000 to $16,800
Entry-level composite boards, low deck, simple shape
Standard
$15,600 to $20,400
Mid-grade capped boards with railing and stairs
Premium
$19,200 to $24,100
Premium capped or PVC boards, multi-level, hidden fasteners
| Size | Basic | Standard | Premium |
|---|---|---|---|
| 10x12 (120 sq ft) | $4,850 – $6,800 | $6,300 – $8,250 | $7,750 – $9,700 |
| 12x12 (144 sq ft) | $5,800 – $8,100 | $7,550 – $9,850 | $9,300 – $11,600 |
| 16x20 (320 sq ft) | $12,800 – $17,900 | $16,700 – $21,800 | $20,500 – $25,600 |
| 20x20 (400 sq ft) | $16,000 – $22,400 | $20,800 – $27,200 | $25,600 – $32,000 |
Related projects, priced for Racine
Jobs that often go together with composite deck are priced below at their usual sizes, using the same Racine wage and price inputs. Compared with national midpoints, paver patio comes out highest (+8%) and wood deck lowest (−2%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood deck | 300 sq ft | $7,400 – $14,900 | −2% |
| Concrete patio | 300 sq ft | $1,250 – $4,250 | +5% |
| Paver patio | 300 sq ft | $3,200 – $5,850 | +8% |
| Gutters | 160 linear ft | $1,350 – $4,300 | +3% |
The best months for composite deck in Racine
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Racine Batten Ap (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Racine are April through November: 8 of 12. Outside them, January, February, March and December have an average daytime high under 45°F.
In January, February, March and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Racine gets about 32 inches of precipitation in a normal year. The wettest months are April, May and June (4.0 inches in June). Inside the workable window, July and November are the driest, at 2.9 and 2.2 inches. The station averages about 7 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 31 | 16 | 1.3 | Cold |
| Feb | 34 | 19 | 1.1 | Cold |
| Mar | 43 | 28 | 2.1 | Cold |
| Apr | 54 | 37 | 3.7 | Workable |
| May | 66 | 46 | 3.5 | Workable |
| Jun | 76 | 57 | 4.0 | Workable |
| Jul | 81 | 63 | 2.9 | Workable |
| Aug | 80 | 63 | 3.4 | Workable |
| Sep | 73 | 55 | 3.2 | Workable |
| Oct | 61 | 43 | 2.9 | Workable |
| Nov | 47 | 32 | 2.2 | Workable |
| Dec | 36 | 22 | 1.6 | Cold |
Composite deck: what moves the price in Racine
Engineering
Large or complex decks may need a structural engineer at $100-$220 an hour to get a permit.
Board grade
Composite materials run $16-$32 per sq ft and the installed price is $40-$80 per sq ft, including the substructure (HomeGuide).
Labor
Labor for composite is $24-$48 per sq ft, higher than wood because the boards need extra parts and more careful assembly.
Optional extras in Racine
Add-ons start from national price ranges and are scaled by 0.99 for Racine, which is the average of the area's wage index (1.04) and goods price index (0.94). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add a deck railing (approx. 0.3 ft per sq ft) | $1,800 – $5,350 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $15,600 to $20,400 for Racine, WI is attached.
Take this estimate with you: PDF report, $9
Multi-page report for Racine, WI: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Composite deck in Racine: your questions
+How much does it cost to build a composite deck in Racine?
For 300 sq ft, expect $12,000 to $24,100 in the Racine area. A standard-spec job lands at $15,600 to $20,400. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for composite deck in Racine?
About $40 to $79.50 per sq ft for materials and labor, plus $50 to $140 for the permit if one is needed. The US range is $40 to $80.
+Is composite deck cheaper in Racine or Milwaukee?
Milwaukee is 10 miles away. The midpoint for 300 sq ft there is $18,600, which is 3% more than Racine ($18,000). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Racine?
About 62% at the midpoint, or $11,200 out of $18,000. Materials are 37% and permits 1%. Nationally, labor is 60%.
+What would 16x20 (320 sq ft) cost in Racine?
$12,800 to $25,600. Pick a different size in the estimator above to get your own number.
+Does composite deck need a permit in Racine?
Often, but rules are set by your city or county building office, so call before you hire. Budget $50 to $140 for fees in the Racine area (our national range of $50 to $150 scaled by the local price level).
+Is Racine expensive for composite deck compared with the rest of Wisconsin?
Racine is 1% below the Wisconsin statewide estimate ($18,300 at the midpoint). We cover 12 metros in Wisconsin; see the state page to compare them.
+What do carpenters earn in Racine?
The BLS median is $29.29 an hour in the Racine area, compared with $29.12 nationally. The 25th to 75th percentile range is $24.17 to $40.84.
+What do basic and premium composite deck work cost in Racine?
For 300 sq ft, basic work runs $12,000 to $16,800 and premium work $19,200 to $24,100. Basic means: entry-level composite boards, low deck, simple shape. Premium means: premium capped or PVC boards, multi-level, hidden fasteners.
+When is the best time to build a composite deck in Racine?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are April through November. July and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add a deck railing" add in Racine?
$1,800 to $5,350 for 300 sq ft, from a national range scaled by the local wage and goods indexes.
Composite deck near Racine
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Composite Decking Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020