Composite deck cost in Odessa, TX
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (300 sq ft)
- $10,700 – $21,400
- Per sq ft
- $35.50 – $71
- before permit
- Versus US midpoint
- −11%
- US $18,100
- Rank of 300 metros
- #218
- 1 = most expensive
Odessa homeowners pay roughly $10,700 to $21,400 to build a composite deck at 300 sq ft, or $35.50 to $71 per sq ft (permit not included). Against the US midpoint, Odessa is 11% lower. Carpenters earn a median of $25.12 an hour in the Odessa area, 14% below the US median of $29.12.
Estimate your composite deck cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 300 sq ft in Odessa, TX, standard level
$13,900 to $18,200
About $46 to $60.50 per sq ft before permits. Labor is about 57% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $5,850 | $7,650 |
| Labor | $8,000 | $10,400 |
| Permits and fees | $75 | $110 |
| Total | $13,900 | $18,200 |
Cost breakdown for 300 sq ft in Odessa, TX
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $4,500 | $6,750 | $9,000 | 42% |
| Labor | $6,150 | $9,200 | $12,300 | 57% |
| Permits and fees | $45 | $95 | $140 | 1% |
| Total | $10,700 | $16,100 | $21,400 | 100% |
Why Odessa prices look the way they do
The wage side of the estimate leans on carpenters, who do 80% of the hours on a typical job. Their local median is $25.12 an hour. Add the other trades involved and the blended wage index for Odessa is 0.85 (US = 1.00), which puts labor at 57% of the total.
On the materials line, the BEA goods price index for the Odessa metro is 93.8 (US = 100). The midpoint materials bill for 300 sq ft comes to $6,750, compared with $7,200 at national prices. Permit and inspection fees are scaled by the broader index (93.9) and land at $45 to $140.
Optional extras in Odessa
Extras are quoted nationally and then scaled to Odessa by the average of the local wage index (0.85) and goods index (0.94), a factor of 0.90. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add a deck railing (approx. 0.3 ft per sq ft) | $1,600 – $4,850 |
When to schedule composite deck in Odessa
We use NOAA's 1991-2020 climate normals for Odessa (in the city). These are 30-year monthly averages, not forecasts.
September through May is the stretch where exterior installation runs into the fewest weather problems in Odessa (9 of 12 months). June, July and August have an average daytime high of 90°F or more.
Odessa gets about 12 inches of precipitation in a normal year. The wettest months are May, August and September (1.6 inches in May). Inside the workable window, February and December are the driest, at 0.5 and 0.6 inches. The station averages about 106 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 57 | 32 | 0.7 | Workable |
| Feb | 62 | 36 | 0.5 | Workable |
| Mar | 71 | 44 | 0.7 | Workable |
| Apr | 79 | 51 | 0.7 | Workable |
| May | 87 | 61 | 1.6 | Workable |
| Jun | 94 | 68 | 1.0 | Hot |
| Jul | 94 | 71 | 1.5 | Hot |
| Aug | 93 | 70 | 1.6 | Hot |
| Sep | 85 | 62 | 1.5 | Workable |
| Oct | 77 | 53 | 1.3 | Workable |
| Nov | 66 | 41 | 0.6 | Workable |
| Dec | 58 | 33 | 0.6 | Workable |
Cost by quality level and size in Odessa
Three bands are cut from the same cited range and localized for Odessa wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.
Basic
$10,700 to $15,000
Entry-level composite boards, low deck, simple shape
Standard
$13,900 to $18,200
Mid-grade capped boards with railing and stairs
Premium
$17,100 to $21,400
Premium capped or PVC boards, multi-level, hidden fasteners
| Size | Basic | Standard | Premium |
|---|---|---|---|
| 10x12 (120 sq ft) | $4,300 – $6,050 | $5,600 – $7,350 | $6,900 – $8,650 |
| 12x12 (144 sq ft) | $5,150 – $7,250 | $6,700 – $8,800 | $8,300 – $10,400 |
| 16x20 (320 sq ft) | $11,400 – $16,000 | $14,800 – $19,400 | $18,300 – $22,800 |
| 20x20 (400 sq ft) | $14,200 – $19,900 | $18,500 – $24,200 | $22,800 – $28,500 |
Related projects, priced for Odessa
Because every project leans on different trades, Odessa's wage level does not move all prices equally. Against the US midpoint, gutters runs −10% and concrete patio −11%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood deck | 300 sq ft | $6,800 – $13,600 | −10% |
| Concrete patio | 300 sq ft | $1,150 – $3,550 | −11% |
| Paver patio | 300 sq ft | $2,700 – $4,850 | −11% |
| Gutters | 160 linear ft | $1,150 – $3,800 | −10% |
How Odessa compares
Same job, same size (300 sq ft), priced for the nearest metros. Midland is the priciest of the group at $17,300. El Paso is the cheapest at $14,500.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Odessa, TXthis page | $10,700 – $21,400 | $16,100 | |
| Midland, TX35 miles | $11,500 – $23,100 | $17,300 | +8% |
| Lubbock, TX115 miles | $9,800 – $19,700 | $14,700 | −8% |
| Abilene, TX170 miles | $9,800 – $19,700 | $14,700 | −8% |
| El Paso, TX175 miles | $9,650 – $19,400 | $14,500 | −10% |
| Amarillo, TX235 miles | $10,300 – $20,600 | $15,400 | −4% |
| Texas (statewide) | $10,600 – $21,300 | $16,000 | level |
| United States | $12,100 – $24,200 | $18,100 | +13% |
Across 300 US metros, Odessa comes in at #218 from the top. The priciest is Honolulu, HI at $25,200; the cheapest is Brownsville, TX at $13,500 (midpoints, 300 sq ft). Statewide, Odessa is 0% above the Texas figure.
Other Texas metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Dallas, TX | 4,049,800 jobs | $11,000 – $22,000 | $16,500 | +3% |
| Houston, TX | 3,289,720 jobs | $10,900 – $21,800 | $16,300 | +2% |
| Austin, TX | 1,293,690 jobs | $10,700 – $21,400 | $16,000 | level |
| San Antonio, TX | 1,126,880 jobs | $10,400 – $20,900 | $15,600 | −3% |
| El Paso, TX | 339,120 jobs | $9,650 – $19,400 | $14,500 | −10% |
| McAllen, TX | 296,700 jobs | $9,550 – $19,100 | $14,300 | −11% |
Cities with a workforce like Odessa's
Big cities and small ones price differently, so here is Odessa against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Johnson City, TN | 81,690 jobs | $10,500 – $21,000 | $15,700 | −2% |
| Greenville, NC | 80,770 jobs | $10,400 – $20,900 | $15,700 | −2% |
| Idaho Falls, ID | 81,840 jobs | $11,000 – $22,100 | $16,600 | +3% |
| Jefferson City, MO | 80,220 jobs | $11,800 – $23,600 | $17,700 | +10% |
Specs and site conditions that change a Odessa bid
Drainage
Ground-level decks over poorly draining yards may need $1,000-$4,000 of drainage work first.
Engineering
Large or complex decks may need a structural engineer at $100-$220 an hour to get a permit.
Board grade
Composite materials run $16-$32 per sq ft and the installed price is $40-$80 per sq ft, including the substructure (HomeGuide).
Local wages behind the labor line
Wages are the part of this estimate that changes most from town to town. 2 trades carry the job here, and each is compared with its US median. The weighted result for Odessa is 0.85 times the national level.
For carpenters (47-2031, weighted 80%) the local median is $25.12 an hour, which is 14% below the national $29.12. The middle half of them earn between $22.57 and $28.35 an hour. BLS counts 180 of them working in the area, 22.2 for every 10,000 jobs (US: 43.1), so the local bench is thinner than average.
Construction laborers (47-2061), 20% of the weighting: a median of $18.45 an hour, 19% below the US median of $22.66. The middle half of them earn between $17.34 and $22.12 an hour. About 970 work in the metro. That is 119.9 per 10,000 jobs, compared with 70.5 nationally, which suggests plenty of local crews to bid.
Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($28.35 an hour) instead of the median, the labor line grows by about $960. At the 25th percentile ($22.57) it shrinks by about $760. The total moves by 6.0% or 4.7%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 80,910 jobs in the Odessa area. That makes it the 235th largest of the 300 metros we cover, with 0.05% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 80% | $22.57 | $25.12 | $28.35 | $29.12 | 0.86 | metro |
| Construction laborers (47-2061) | 20% | $17.34 | $18.45 | $22.12 | $22.66 | 0.81 | metro |
| Blended | 100% | 0.85 | |||||
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $13,900 to $18,200 for Odessa, TX is attached.
Detailed composite deck report for Odessa, TX, $9
Multi-page report for Odessa, TX: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Composite deck in Odessa: your questions
+How much does it cost to build a composite deck in Odessa?
For 300 sq ft, expect $10,700 to $21,400 in the Odessa area. A standard-spec job lands at $13,900 to $18,200. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for composite deck in Odessa?
About $35.50 to $71 per sq ft for materials and labor, plus $45 to $140 for the permit if one is needed. The US range is $40 to $80.
+Is composite deck cheaper in Odessa or Midland?
Midland is 35 miles away. The midpoint for 300 sq ft there is $17,300, which is 8% more than Odessa ($16,100). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Odessa?
About 57% at the midpoint, or $9,200 out of $16,100. Materials are 42% and permits 1%. Nationally, labor is 60%.
+What would 16x20 (320 sq ft) cost in Odessa?
$11,400 to $22,800. Pick a different size in the estimator above to get your own number.
+Does composite deck need a permit in Odessa?
Often, but rules are set by your city or county building office, so call before you hire. Budget $45 to $140 for fees in the Odessa area (our national range of $50 to $150 scaled by the local price level).
+Is Odessa expensive for composite deck compared with the rest of Texas?
Odessa is 0% above the Texas statewide estimate ($16,000 at the midpoint). We cover 21 metros in Texas; see the state page to compare them.
+What do carpenters earn in Odessa?
The BLS median is $25.12 an hour in the Odessa area, compared with $29.12 nationally. The 25th to 75th percentile range is $22.57 to $28.35.
+What do basic and premium composite deck work cost in Odessa?
For 300 sq ft, basic work runs $10,700 to $15,000 and premium work $17,100 to $21,400. Basic means: entry-level composite boards, low deck, simple shape. Premium means: premium capped or PVC boards, multi-level, hidden fasteners.
+When is the best time to build a composite deck in Odessa?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are September through May. February and December are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add a deck railing" add in Odessa?
$1,600 to $4,850 for 300 sq ft, from a national range scaled by the local wage and goods indexes.
Composite deck near Odessa
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Composite Decking Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020