Skip to content
CostLocal

Asphalt driveway cost in Mississippi

Statewide estimate from BLS wages and BEA prices. Reviewed Nov 4, 2026.

Statewide range (600 sq ft)
$2,700 – $6,450
Per sq ft
$4.45 – $10.50
before permit
Versus US midpoint
−12%
US $5,250
Metros covered
3

What does it cost to pave a driveway in Mississippi? Plan on $2,700 to $6,450 for 600 sq ft. Wages (0.76x the US blend), materials (price index 96.2) and permit costs (87.0) put the state below the national midpoint by 12%.

Inside Mississippi, the metros we cover range from $4,550 (Hattiesburg) to $4,750 (Gulfport) at the midpoint. Pick your closest city in the table for a tighter number.

Estimate your asphalt driveway cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Full new driveway: base, 2-3 in of hot mix, edging

Add-ons

Estimated cost for 600 sq ft in Mississippi (statewide), standard level

$3,850 to $5,300

About $6.25 to $8.65 per sq ft before permits. Labor is about 35% of the bill.

Cost breakdown
PartLowHigh
Materials$2,500$3,250
Labor$1,250$1,950
Permits and fees$85$130
Total$3,850$5,300
Save and get a PDF report

Cost breakdown for 600 sq ft in Mississippi

Part of the jobLowMidpointHighShare
Materials$1,900$2,850$3,80062%
Labor$770$1,600$2,45035%
Permits and fees$45$110$1702%
Total$2,700$4,600$6,450100%

Mississippi against its neighbors

Mississippi ranks 51 of 51 (the 50 states plus DC) for asphalt driveway, where 1 is the most expensive. The costliest is Hawaii at $7,500 and the cheapest Mississippi at $4,600, both for 600 sq ft at the midpoint. Mississippi sits at $4,600. The five states closest by workforce center are listed below.

States near Mississippi, same project and size
StateDistanceRangeMidpointvs. here
Louisiana130 miles away$2,800 – $6,700$4,750+4%
Alabama180 miles away$2,750 – $6,550$4,650+2%
Arkansas330 miles away$2,700 – $6,450$4,600level
Tennessee330 miles away$2,850 – $6,800$4,800+5%
Georgia350 miles away$2,850 – $6,800$4,850+6%

What paving, surfacing and tamping equipment operators and the other trades earn in Mississippi

Mississippi's labor line is priced from 3 trades, each compared with its US median wage. After weighting by each trade's share of the work, the state comes out at 0.76 times the national level.

Paving, surfacing and tamping equipment operators (47-2071), 40% of the weighting: a median of $17.80 an hour, 31% below the US median of $25.64. The middle half of them earn between $16.09 and $21.76 an hour. About 470 work in the state. That is 4.0 per 10,000 jobs, compared with 2.7 nationally, which suggests plenty of local crews to bid.

For construction laborers (47-2061, weighted 30%) the local median is $18.13 an hour, which is 20% below the national $22.66. The middle half of them earn between $16.25 and $22.01 an hour. BLS counts 8,800 of them working in the state, 75.7 for every 10,000 jobs (US: 70.5), so the local bench is about average.

Operating engineers and other construction equipment operators (47-2073), 30% of the weighting: a median of $22.79 an hour, 21% below the US median of $28.78. The middle half of them earn between $19.00 and $27.50 an hour. About 4,170 work in the state. That is 35.9 per 10,000 jobs, compared with 30.7 nationally, which suggests plenty of local crews to bid.

A crew paid at the 75th percentile for paving, surfacing and tamping equipment operators ($21.76 an hour) would add about $130 to the statewide midpoint; one at the 25th percentile ($16.09) would take off about $55. Use that as a rough guide to how far a bid can sit from our midpoint on wages alone.

BLS counts 1,163,030 jobs across Mississippi (May 2025), which is 0.7% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Paving, surfacing and tamping equipment operators (47-2071)40%$16.09$17.80$21.76$25.640.69state
Construction laborers (47-2061)30%$16.25$18.13$22.01$22.660.80state
Operating engineers and other construction equipment operators (47-2073)30%$19.00$22.79$27.50$28.780.79state
Blended100%0.76

Other Mississippi jobs that often go with asphalt driveway

Each project weights the trades differently, so Mississippi's wage level does not push every price by the same amount. Compared with the US midpoint, concrete slab is −12% and concrete driveway −16%.

Related projects with local prices
ProjectSizeRangevs. US
Concrete driveway600 sq ft$3,100 – $7,650−16%
Gravel driveway1,000 sq ft$2,200 – $8,950−12%
Paver patio300 sq ft$2,600 – $4,650−14%
French drain60 linear ft$530 – $1,850−12%
Concrete slab400 sq ft$2,150 – $4,600−12%
Concrete patio300 sq ft$1,100 – $3,400−14%

Extras that change the Mississippi total

Add-ons start from national price ranges and are scaled by 0.86 for Mississippi, which is the average of the area's wage index (0.76) and goods price index (0.96). The estimator above can add them to your total.

Add-on prices
Add-onLocal range
Add a sealcoat$520 – $1,050

Mississippi seasons and asphalt driveway

Weather decides when digging and ground work can happen, and Mississippi is not uniform. The table uses NOAA's 1991-2020 climate normals from the weather station nearest each metro we cover, and counts the months that are neither cold nor hot enough to complicate the job.

Gulfport has the longest comfortable season of the metros we cover in Mississippi at 10 months (September through June); Hattiesburg has the shortest at 9 (September through May). Rainfall runs from 51 inches a year in Jackson to 63 inches in Gulfport.

We do not adjust prices by month, because we have no reliable published data on seasonal pricing. Timing is still worth raising when you collect bids.

Climate by metro (NOAA 1991-2020 normals)
MetroJan avg low °FJul avg high °FPrecip (in/yr)Comfortable months
Jackson3892519: September through May
Gulfport42906310: September through June
Hattiesburg3892599: September through May

Why two Mississippi quotes can differ

  • New versus overlay

    Resurfacing an existing driveway runs $3-$7 per sq ft; a full new driveway runs $5-$12+ (HomeGuide). Tearing out and replacing one is higher still.

  • Base work

    Four to eight inches of compacted aggregate under the asphalt is where cheap quotes cut corners. Base typically runs $1-$3 per sq ft.

  • Small jobs cost more per foot

    Paving crews move a paver, roller and trucks to your address, so a 400 sq ft driveway carries more mobilization per square foot than a 1,000 sq ft one.

  • Hot-mix price

    Hot-mix asphalt is $100-$200 per ton delivered and moves with oil prices (PaveGauge).

  • Sealcoating

    Sealing is $1-$2 per sq ft and is a maintenance cost, not part of the install.

Basic, standard or premium: Mississippi prices

Bands overlap on purpose, since a good standard job can cost as much as a light premium one. Below are the three bands for the default size, then a grid from 1-car (12x20), 240 sq ft to long rural (10x100), 1,000 sq ft.

Basic

$2,700 to $4,200

New topcoat over a sound base, flat lot

Standard

$3,850 to $5,300

Full new driveway: base, 2-3 in of hot mix, edging

Premium

$4,950 to $6,450

Full tear-out and rebuild, drainage work, heavy-duty depth

Cost by size and quality level
SizeBasicStandardPremium
1-car (12x20), 240 sq ft$1,100 – $1,750$1,600 – $2,200$2,050 – $2,700
20x20 (400 sq ft)$1,850 – $2,850$2,600 – $3,600$3,350 – $4,350
2-car (20x30), 600 sq ft$2,700 – $4,200$3,850 – $5,300$4,950 – $6,450
long rural (10x100), 1,000 sq ft$4,500 – $6,950$6,350 – $8,750$8,150 – $10,600

Asphalt driveway cost by metro in Mississippi

2 of the 3 metros sit above the statewide midpoint of $4,600, and the top-to-bottom gap is 4%. Each row prices the default size with that metro's own BLS wages and BEA price levels, so the gap between rows is real local variation rather than a flat markup.

MetroRange (600 sq ft)Midpointvs. state
Gulfport, MS$2,800 – $6,700$4,750+4%
Jackson, MS$2,800 – $6,650$4,750+3%
Hattiesburg, MS$2,700 – $6,400$4,550−1%

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $3,850 to $5,300 for Mississippi is attached.

Detailed asphalt driveway report for Mississippi, $9

The report lays out the asphalt driveway numbers for Mississippi line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Asphalt driveway in Mississippi: your questions

+How much does it cost to pave a driveway in Mississippi?

$2,700 to $6,450 for 600 sq ft, using statewide wages and prices. Metro areas inside Mississippi can sit above or below that.

+Which city in Mississippi is cheapest for asphalt driveway?

Hattiesburg at about $4,550 (midpoint, 600 sq ft). The priciest is Gulfport at $4,750.

+Is asphalt driveway cheaper in Mississippi than the US average?

It is 12% cheaper: $4,600 against $5,250 for 600 sq ft at the midpoint.

+What share of the price is labor in Mississippi?

About 35% ($1,600). Materials are 62%. Statewide labor for this job is weighted 0.76x the national wage level.

+What do paving, surfacing and tamping equipment operators earn in Mississippi?

The BLS statewide median is $17.80 an hour, against $25.64 for the US. The 25th to 75th percentile range is $16.09 to $21.76.

+Where does Mississippi rank for asphalt driveway costs?

51st most expensive of 51 (the 50 states plus DC) at the midpoint, $4,600 for 600 sq ft. Rank 1 is the costliest.

+What do basic and premium asphalt driveway work cost in Mississippi?

For 600 sq ft, basic work runs $2,700 to $4,200 and premium work $4,950 to $6,450. Basic means: new topcoat over a sound base, flat lot. Premium means: full tear-out and rebuild, drainage work, heavy-duty depth.

+Does the season matter for asphalt driveway in Mississippi?

Yes where winters or summers are hard. Of the Mississippi metros we cover, Gulfport has the most comfortable months (10 of 12) based on NOAA 1991-2020 normals. Our prices do not change by month, so ask contractors whether they charge more or less in busy and slow seasons.

+What does "add a sealcoat" add in Mississippi?

$520 to $1,050 for 600 sq ft, from a national range scaled by the statewide wage and goods indexes.

Asphalt driveway by city in Mississippi

Asphalt driveway: all pricesMississippi cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = hot-mix asphalt ($2.30-$3.60/sq ft at 3 in) plus aggregate base ($1-$3/sq ft) from PaveGauge's component table.