Aluminum fence cost in St. George, UT
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $3,500 – $10,600
- Per linear ft
- $23 – $69.50
- before permit
- Versus US midpoint
- −7%
- US $7,600
- Rank of 300 metros
- #218
- 1 = most expensive
St. George homeowners pay roughly $3,500 to $10,600 to install an aluminum fence at 150 linear ft, or $23 to $69.50 per linear ft (permit not included). Against the US midpoint, St. George is 7% lower. Carpenters earn a median of $22.63 an hour in the St. George area, 22% below the US median of $29.12.
Estimate your aluminum fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in St. George, UT, standard level
$5,600 to $8,450
About $37 to $55.50 per linear ft before permits. Labor is about 32% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $3,700 | $5,700 |
| Labor | $1,850 | $2,650 |
| Permits and fees | $70 | $110 |
| Total | $5,600 | $8,450 |
Cost breakdown for 150 linear ft in St. George, UT
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $2,150 | $4,700 | $7,250 | 67% |
| Labor | $1,300 | $2,250 | $3,200 | 32% |
| Permits and fees | $40 | $90 | $150 | 1% |
| Total | $3,500 | $7,050 | $10,600 | 100% |
What is behind the St. George number
Labor is 32% of the midpoint bill here, against 35% nationally. The mix of trades behind this job is carpenters (40%), construction laborers (40%), sheet metal workers (20%). We weight each trade's local median wage by that share and compare it with the national median. In St. George the blended ratio comes out at 0.86.
On the materials line, the BEA goods price index for the St. George metro is 96.4 (US = 100). The midpoint materials bill for 150 linear ft comes to $4,700, compared with $4,900 at national prices. Permit and inspection fees are scaled by the broader index (97.3) and land at $40 to $150.
Add-ons priced for St. George
Extras are quoted nationally and then scaled to St. George by the average of the local wage index (0.86) and goods index (0.96), a factor of 0.91. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $180 – $820 |
Pick a size, pick a tier: aluminum fence pricing in St. George
Three bands are cut from the same cited range and localized for St. George wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.
Basic
$3,500 to $6,350
Standard picket or ornamental, 4 ft
Standard
$5,600 to $8,450
Ornamental pool-code fence, 4-5 ft
Premium
$7,750 to $10,600
Tall privacy slat or custom ornamental
| Size | Basic | Standard | Premium |
|---|---|---|---|
| pool fence (100 linear ft) | $2,350 – $4,250 | $3,750 – $5,700 | $5,200 – $7,100 |
| 150 ft (150 linear ft) | $3,500 – $6,350 | $5,600 – $8,450 | $7,750 – $10,600 |
| 200 ft (200 linear ft) | $4,650 – $8,400 | $7,450 – $11,200 | $10,300 – $14,100 |
Specs and site conditions that change a St. George bid
Permit
A fence permit runs $40-$150.
Style
Aluminum picket runs $25-$50 per linear foot installed, ornamental fence $40-$75, and privacy designs $75-$130 (HomeGuide).
Soil and slope
Steep slopes and rocky clay can add $15-$20+ per linear foot in labor.
When to schedule aluminum fence in St. George
We use NOAA's 1991-2020 climate normals for St George (5 miles from the city center). These are 30-year monthly averages, not forecasts.
October through May is the stretch where exterior installation runs into the fewest weather problems in St. George (8 of 12 months). June, July, August and September have an average daytime high of 90°F or more.
St. George gets about 9 inches of precipitation in a normal year, including roughly 1 inches of snow. The wettest months are January, February and August (1.4 inches in February). Inside the workable window, April and May are the driest, at 0.7 and 0.3 inches. The station averages about 128 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 54 | 28 | 1.2 | Workable |
| Feb | 59 | 32 | 1.4 | Workable |
| Mar | 68 | 39 | 1.0 | Workable |
| Apr | 75 | 46 | 0.7 | Workable |
| May | 85 | 56 | 0.3 | Workable |
| Jun | 96 | 65 | 0.2 | Hot |
| Jul | 102 | 72 | 0.5 | Hot |
| Aug | 100 | 70 | 1.1 | Hot |
| Sep | 92 | 61 | 0.7 | Hot |
| Oct | 79 | 47 | 0.8 | Workable |
| Nov | 64 | 35 | 0.7 | Workable |
| Dec | 53 | 28 | 0.9 | Workable |
Local wages behind the labor line
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for St. George is 0.86 times the national level.
For carpenters (47-2031, weighted 40%) the local median is $22.63 an hour, which is 22% below the national $29.12. The middle half of them earn between $19.45 and $28.36 an hour. BLS counts 1,110 of them working in the area, 122.7 for every 10,000 jobs (US: 43.1), so the local bench is deeper than average.
Construction laborers (47-2061), 40% of the weighting: a median of $21.96 an hour, 3% below the US median of $22.66. The middle half of them earn between $18.37 and $23.78 an hour. About 1,500 work in the metro. That is 165.7 per 10,000 jobs, compared with 70.5 nationally, which suggests plenty of local crews to bid.
For sheet metal workers (47-2211, weighted 20%) the local median is $23.51 an hour, which is 21% below the national $29.71. The middle half of them earn between $22.49 and $29.83 an hour. BLS counts 60 of them working in the area, 6.6 for every 10,000 jobs (US: 7.7), so the local bench is about average.
Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($28.36 an hour) instead of the median, the labor line grows by about $210. At the 25th percentile ($19.45) it shrinks by about $110. The total moves by 2.9% or 1.6%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 90,500 jobs in the St. George area. That makes it the 219th largest of the 300 metros we cover, with 0.06% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 40% | $19.45 | $22.63 | $28.36 | $29.12 | 0.78 | metro |
| Construction laborers (47-2061) | 40% | $18.37 | $21.96 | $23.78 | $22.66 | 0.97 | metro |
| Sheet metal workers (47-2211) | 20% | $22.49 | $23.51 | $29.83 | $29.71 | 0.79 | metro |
| Blended | 100% | 0.86 | |||||
What nearby projects cost in St. George
Because every project leans on different trades, St. George's wage level does not move all prices equally. Against the US midpoint, inground pool runs −5% and wood fence −8%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Vinyl fence | 150 linear ft | $4,300 – $8,600 | −6% |
| Wood fence | 150 linear ft | $2,750 – $7,050 | −8% |
| Chain-link fence | 150 linear ft | $1,450 – $5,650 | −8% |
| Inground pool | 450 sq ft | $34,200 – $107,000 | −5% |
How St. George compares
Same job, same size (150 linear ft), priced for the nearest metros. Las Vegas is the priciest of the group at $7,350. Lake Havasu City is the cheapest at $7,000.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| St. George, UTthis page | $3,500 – $10,600 | $7,050 | |
| Lake Havasu City, AZ110 miles | $3,450 – $10,500 | $7,000 | −1% |
| Las Vegas, NV110 miles | $3,650 – $11,000 | $7,350 | +4% |
| Flagstaff, AZ135 miles | $3,600 – $10,800 | $7,200 | +2% |
| Prescott Valley, AZ190 miles | $3,550 – $10,800 | $7,150 | +2% |
| Provo, UT190 miles | $3,650 – $11,000 | $7,300 | +4% |
| Utah (statewide) | $3,650 – $10,900 | $7,300 | +3% |
| United States | $3,800 – $11,400 | $7,600 | +8% |
Across 300 US metros, St. George comes in at #218 from the top. The priciest is Honolulu, HI at $9,700; the cheapest is Brownsville, TX at $6,500 (midpoints, 150 linear ft). Statewide, St. George is 3% below the Utah figure.
Other Utah metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Salt Lake City, UT | 826,210 jobs | $3,700 – $11,100 | $7,450 | +5% |
| Provo, UT | 304,660 jobs | $3,650 – $11,000 | $7,300 | +4% |
| Ogden, UT | 271,370 jobs | $3,600 – $10,800 | $7,200 | +3% |
| Logan, UT | 66,800 jobs | $3,600 – $10,800 | $7,200 | +2% |
Cities with a workforce like St. George's
Big cities and small ones price differently, so here is St. George against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Panama City, FL | 90,610 jobs | $3,500 – $10,600 | $7,000 | level |
| Medford, OR | 89,060 jobs | $3,900 – $11,800 | $7,850 | +11% |
| Bellingham, WA | 91,390 jobs | $4,300 – $12,800 | $8,550 | +22% |
| Florence, SC | 89,060 jobs | $3,500 – $10,600 | $7,050 | level |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,600 to $8,450 for St. George, UT is attached.
A detailed PDF report of this estimate, $9
Multi-page report for St. George, UT: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Aluminum fence in St. George: your questions
+How much does it cost to install an aluminum fence in St. George?
For 150 linear ft, expect $3,500 to $10,600 in the St. George area. A standard-spec job lands at $5,600 to $8,450. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for aluminum fence in St. George?
About $23 to $69.50 per linear ft for materials and labor, plus $40 to $150 for the permit if one is needed. The US range is $25 to $75.
+Is aluminum fence cheaper in St. George or Lake Havasu City?
Lake Havasu City is 110 miles away. The midpoint for 150 linear ft there is $7,000, which is 1% less than St. George ($7,050). Wage and materials indexes both feed that gap.
+How much of the bill is labor in St. George?
About 32% at the midpoint, or $2,250 out of $7,050. Materials are 67% and permits 1%. Nationally, labor is 35%.
+What would 150 ft (150 linear ft) cost in St. George?
$3,500 to $10,600. Pick a different size in the estimator above to get your own number.
+Does aluminum fence need a permit in St. George?
Often, but rules are set by your city or county building office, so call before you hire. Budget $40 to $150 for fees in the St. George area (our national range of $40 to $150 scaled by the local price level).
+Is St. George expensive for aluminum fence compared with the rest of Utah?
St. George is 3% below the Utah statewide estimate ($7,300 at the midpoint). We cover 5 metros in Utah; see the state page to compare them.
+What do carpenters earn in St. George?
The BLS median is $22.63 an hour in the St. George area, compared with $29.12 nationally. The 25th to 75th percentile range is $19.45 to $28.36.
+What do basic and premium aluminum fence work cost in St. George?
For 150 linear ft, basic work runs $3,500 to $6,350 and premium work $7,750 to $10,600. Basic means: standard picket or ornamental, 4 ft. Premium means: tall privacy slat or custom ornamental.
+When is the best time to install an aluminum fence in St. George?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are October through May. April and May are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in St. George?
$180 to $820, from a national range scaled by the local wage and goods indexes.
Aluminum fence near St. George
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does an Aluminum Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus HomeGuide's $10-$25/ft labor range.