Aluminum fence cost in Salt Lake City, UT
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $3,700 – $11,100
- Per linear ft
- $24.50 – $73.50
- before permit
- Versus US midpoint
- −2%
- US $7,600
- Rank of 300 metros
- #125
- 1 = most expensive
Local price for an aluminum fence in the Salt Lake City area: $3,700 to $11,100 for 150 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint lands close to the US figure. Building materials run about 4% below the US average here (BEA goods price index 96.4).
Estimate your aluminum fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Salt Lake City, UT, standard level
$5,950 to $8,900
About $39 to $58.50 per linear ft before permits. Labor is about 35% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $3,700 | $5,700 |
| Labor | $2,200 | $3,100 |
| Permits and fees | $75 | $120 |
| Total | $5,950 | $8,900 |
Cost breakdown for 150 linear ft in Salt Lake City, UT
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $2,150 | $4,700 | $7,250 | 63% |
| Labor | $1,500 | $2,650 | $3,750 | 35% |
| Permits and fees | $40 | $95 | $150 | 1% |
| Total | $3,700 | $7,450 | $11,100 | 100% |
What is behind the Salt Lake City number
Labor is 35% of the midpoint bill here, against 35% nationally. The mix of trades behind this job is carpenters (40%), construction laborers (40%), sheet metal workers (20%). We weight each trade's local median wage by that share and compare it with the national median. In Salt Lake City the blended ratio comes out at 1.00.
Materials are scaled with BEA's regional price parity for goods. Salt Lake City is at 96.4 against 100 for the US, so a materials line of $4,900 nationally becomes $4,700 here (midpoint, 150 linear ft). Permits follow the all-items index of 100.9: $40 to $150.
Specs and site conditions that change a Salt Lake City bid
Pool codes
Many codes require a pool barrier with gaps under 4 inches, which influences the style you can buy.
Permit
A fence permit runs $40-$150.
Style
Aluminum picket runs $25-$50 per linear foot installed, ornamental fence $40-$75, and privacy designs $75-$130 (HomeGuide).
What nearby projects cost in Salt Lake City
Jobs that often go together with aluminum fence are priced below at their usual sizes, using the same Salt Lake City wage and price inputs. Compared with national midpoints, inground pool comes out highest (−1%) and vinyl fence lowest (−3%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Vinyl fence | 150 linear ft | $4,400 – $8,900 | −3% |
| Wood fence | 150 linear ft | $3,000 – $7,500 | −2% |
| Chain-link fence | 150 linear ft | $1,500 – $6,100 | −1% |
| Inground pool | 450 sq ft | $35,700 – $111,500 | −1% |
Is Salt Lake City cheap or dear? The local comparison
Of the five closest metros, all are cheaper than Salt Lake City. St. George is the lowest at about $7,050 (midpoint, 150 linear ft), 230 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Salt Lake City, UTthis page | $3,700 – $11,100 | $7,450 | |
| Provo, UT60 miles | $3,650 – $11,000 | $7,300 | −2% |
| Ogden, UT70 miles | $3,600 – $10,800 | $7,200 | −3% |
| Logan, UT110 miles | $3,600 – $10,800 | $7,200 | −3% |
| Idaho Falls, ID210 miles | $3,550 – $10,700 | $7,100 | −4% |
| St. George, UT230 miles | $3,500 – $10,600 | $7,050 | −5% |
| Utah (statewide) | $3,650 – $10,900 | $7,300 | −2% |
| United States | $3,800 – $11,400 | $7,600 | +2% |
Out of the 300 metros we cover, Salt Lake City ranks #125 for the cost of this job (#1 is the most expensive). Statewide, Salt Lake City is 2% above the Utah figure.
Elsewhere in Utah
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Provo, UT | 304,660 jobs | $3,650 – $11,000 | $7,300 | −2% |
| Ogden, UT | 271,370 jobs | $3,600 – $10,800 | $7,200 | −3% |
| St. George, UT | 90,500 jobs | $3,500 – $10,600 | $7,050 | −5% |
| Logan, UT | 66,800 jobs | $3,600 – $10,800 | $7,200 | −3% |
Metros of a similar size
Big cities and small ones price differently, so here is Salt Lake City against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Cleveland, OH | 1,031,130 jobs | $3,850 – $11,400 | $7,650 | +3% |
| Milwaukee, WI | 820,780 jobs | $3,900 – $11,500 | $7,700 | +4% |
| Sacramento, CA | 1,080,590 jobs | $4,300 – $12,700 | $8,500 | +14% |
| Jacksonville, FL | 765,930 jobs | $3,500 – $10,600 | $7,050 | −5% |
Who does the work: Salt Lake City trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Salt Lake City the blend is 1.00.
Carpenters (47-2031), 40% of the weighting: a median of $28.78 an hour, in line with the US median of $29.12. The middle half of them earn between $22.83 and $31.00 an hour. About 6,420 work in the metro. That is 77.7 per 10,000 jobs, compared with 43.1 nationally, which suggests plenty of local crews to bid.
For construction laborers (47-2061, weighted 40%) the local median is $22.82 an hour, which is in line with the national $22.66. The middle half of them earn between $19.03 and $27.96 an hour. BLS counts 7,790 of them working in the area, 94.3 for every 10,000 jobs (US: 70.5), so the local bench is deeper than average.
Sheet metal workers (47-2211), 20% of the weighting: a median of $30.25 an hour, in line with the US median of $29.71. The middle half of them earn between $22.68 and $39.57 an hour. About 660 work in the metro. That is 8.0 per 10,000 jobs, compared with 7.7 nationally, so the supply of crews looks typical.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $80 to the midpoint estimate; the 25th percentile takes off about $210. That is a swing of roughly 2.9% to 1.1% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Salt Lake City-Murray has 826,210 jobs in total (BLS, May 2025), ranking 37th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 40% | $22.83 | $28.78 | $31.00 | $29.12 | 0.99 | metro |
| Construction laborers (47-2061) | 40% | $19.03 | $22.82 | $27.96 | $22.66 | 1.01 | metro |
| Sheet metal workers (47-2211) | 20% | $22.68 | $30.25 | $39.57 | $29.71 | 1.02 | metro |
| Blended | 100% | 1.00 | |||||
The best months for aluminum fence in Salt Lake City
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Salt Lake City Intl Ap (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Salt Lake City are February through June and September through November: 8 of 12. Outside them, January and December have an average daytime high under 45°F, and July and August have an average daytime high of 90°F or more.
In January and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Salt Lake City gets about 16 inches of precipitation in a normal year, including roughly 52 inches of snow. The wettest months are March, April and May (2.2 inches in April). Inside the workable window, June and September are the driest, at 0.9 and 1.1 inches. The station averages about 62 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 39 | 24 | 1.4 | Cold |
| Feb | 45 | 29 | 1.3 | Workable |
| Mar | 55 | 36 | 1.8 | Workable |
| Apr | 62 | 42 | 2.2 | Workable |
| May | 73 | 50 | 1.8 | Workable |
| Jun | 84 | 59 | 0.9 | Workable |
| Jul | 94 | 68 | 0.5 | Hot |
| Aug | 92 | 67 | 0.6 | Hot |
| Sep | 81 | 56 | 1.1 | Workable |
| Oct | 66 | 44 | 1.3 | Workable |
| Nov | 51 | 33 | 1.3 | Workable |
| Dec | 39 | 25 | 1.4 | Cold |
Cost by quality level and size in Salt Lake City
The cited range is split into basic, standard and premium bands, then scaled to Salt Lake City. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from pool fence (100 linear ft) to 200 ft (200 linear ft).
Basic
$3,700 to $6,700
Standard picket or ornamental, 4 ft
Standard
$5,950 to $8,900
Ornamental pool-code fence, 4-5 ft
Premium
$8,150 to $11,100
Tall privacy slat or custom ornamental
| Size | Basic | Standard | Premium |
|---|---|---|---|
| pool fence (100 linear ft) | $2,500 – $4,500 | $4,000 – $6,000 | $5,500 – $7,500 |
| 150 ft (150 linear ft) | $3,700 – $6,700 | $5,950 – $8,900 | $8,150 – $11,100 |
| 200 ft (200 linear ft) | $4,950 – $8,900 | $7,900 – $11,800 | $10,900 – $14,800 |
Extras that change the Salt Lake City total
Add-ons start from national price ranges and are scaled by 0.98 for Salt Lake City, which is the average of the area's wage index (1.00) and goods price index (0.96). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $200 – $880 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,950 to $8,900 for Salt Lake City, UT is attached.
Take this estimate with you: PDF report, $9
The report lays out the aluminum fence numbers for Salt Lake City, UT line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Aluminum fence in Salt Lake City: your questions
+How much does it cost to install an aluminum fence in Salt Lake City?
For 150 linear ft, expect $3,700 to $11,100 in the Salt Lake City area. A standard-spec job lands at $5,950 to $8,900. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for aluminum fence in Salt Lake City?
About $24.50 to $73.50 per linear ft for materials and labor, plus $40 to $150 for the permit if one is needed. The US range is $25 to $75.
+Is aluminum fence cheaper in Salt Lake City or Provo?
Provo is 60 miles away. The midpoint for 150 linear ft there is $7,300, which is 2% less than Salt Lake City ($7,450). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Salt Lake City?
About 35% at the midpoint, or $2,650 out of $7,450. Materials are 63% and permits 1%. Nationally, labor is 35%.
+What would 150 ft (150 linear ft) cost in Salt Lake City?
$3,700 to $11,100. Pick a different size in the estimator above to get your own number.
+Does aluminum fence need a permit in Salt Lake City?
Often, but rules are set by your city or county building office, so call before you hire. Budget $40 to $150 for fees in the Salt Lake City area (our national range of $40 to $150 scaled by the local price level).
+Is Salt Lake City expensive for aluminum fence compared with the rest of Utah?
Salt Lake City is 2% above the Utah statewide estimate ($7,300 at the midpoint). We cover 5 metros in Utah; see the state page to compare them.
+What do carpenters earn in Salt Lake City?
The BLS median is $28.78 an hour in the Salt Lake City area, compared with $29.12 nationally. The 25th to 75th percentile range is $22.83 to $31.00.
+What do basic and premium aluminum fence work cost in Salt Lake City?
For 150 linear ft, basic work runs $3,700 to $6,700 and premium work $8,150 to $11,100. Basic means: standard picket or ornamental, 4 ft. Premium means: tall privacy slat or custom ornamental.
+When is the best time to install an aluminum fence in Salt Lake City?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are February through June and September through November. June and September are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Salt Lake City?
$200 to $880, from a national range scaled by the local wage and goods indexes.
Aluminum fence near Salt Lake City
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does an Aluminum Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus HomeGuide's $10-$25/ft labor range.