Skip to content
CostLocal

Aluminum fence cost in Erie, PA

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (150 linear ft)
$3,800 – $11,400
Per linear ft
$25 – $75
before permit
Versus US midpoint
Level
US $7,600
Rank of 300 metros
#108
1 = most expensive

Erie homeowners pay roughly $3,800 to $11,400 to install an aluminum fence at 150 linear ft, or $25 to $75 per linear ft (permit not included). Against the US midpoint, Erie is almost level. Carpenters earn a median of $27.33 an hour in the Erie area, 6% below the US median of $29.12.

Estimate your aluminum fence cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Ornamental pool-code fence, 4-5 ft

Add-ons

Estimated cost for 150 linear ft in Erie, PA, standard level

$6,050 to $9,100

About $40 to $60 per linear ft before permits. Labor is about 34% of the bill.

Cost breakdown
PartLowHigh
Materials$3,850$5,950
Labor$2,150$3,000
Permits and fees$65$110
Total$6,050$9,100
Save and get a PDF report

Cost breakdown for 150 linear ft in Erie, PA

Part of the jobLowMidpointHighShare
Materials$2,250$4,900$7,55065%
Labor$1,450$2,600$3,70034%
Permits and fees$35$85$1401%
Total$3,800$7,550$11,400100%

What is behind the Erie number

The wage side of the estimate leans on carpenters, who do 40% of the hours on a typical job. Their local median is $27.33 an hour. Add the other trades involved and the blended wage index for Erie is 0.98 (US = 1.00), which puts labor at 34% of the total.

On the materials line, the BEA goods price index for the Erie metro is 100.7 (US = 100). The midpoint materials bill for 150 linear ft comes to $4,900, compared with $4,900 at national prices. Permit and inspection fees are scaled by the broader index (91.0) and land at $35 to $140.

When to schedule aluminum fence in Erie

We use NOAA's 1991-2020 climate normals for Erie Intl Ap (5 miles from the city center). These are 30-year monthly averages, not forecasts.

April through November is the stretch where exterior installation runs into the fewest weather problems in Erie (8 of 12 months). January, February, March and December have an average daytime high under 45°F.

In January, February, March and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.

Erie gets about 43 inches of precipitation in a normal year, including roughly 104 inches of snow. The wettest months are September, October and December (4.4 inches in October). Inside the workable window, July and August are the driest, at 3.3 and 3.4 inches. The station averages about 5 days a year at 90°F or above.

Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.

Monthly normals, Erie Intl Ap (NOAA, 1991-2020)
MonthAvg high °FAvg low °FPrecip (in)For this job
Jan35213.4Cold
Feb37212.5Cold
Mar44283.1Cold
Apr57383.5Workable
May68493.5Workable
Jun77593.7Workable
Jul81643.3Workable
Aug80633.4Workable
Sep74574.3Workable
Oct62464.4Workable
Nov51373.8Workable
Dec40284.2Cold

Erie against nearby metros and the rest of Pennsylvania

Of the five closest metros, 1 is cheaper than Erie. Youngstown is the lowest at about $7,250 (midpoint, 150 linear ft), 75 miles away.

Comparison with nearby areas
AreaRangeMidpointvs. here
Erie, PAthis page$3,800 – $11,400$7,550
Youngstown, OH75 miles$3,650 – $10,900$7,250−4%
Cleveland, OH75 miles$3,850 – $11,400$7,650+1%
Buffalo, NY95 miles$3,900 – $11,700$7,800+3%
Akron, OH95 miles$3,850 – $11,500$7,650+1%
Pittsburgh, PA115 miles$3,850 – $11,500$7,700+1%
Pennsylvania (statewide)$3,800 – $11,400$7,600level
United States$3,800 – $11,400$7,600level

Across 300 US metros, Erie comes in at #108 from the top. The priciest is Honolulu, HI at $9,700; the cheapest is Brownsville, TX at $6,500 (midpoints, 150 linear ft). Statewide, Erie is 0% below the Pennsylvania figure.

Other Pennsylvania metros

Pennsylvania metros compared with Erie
MetroSizeRangeMidpointvs. here
Philadelphia, PA2,897,830 jobs$3,900 – $11,600$7,750+3%
Pittsburgh, PA1,114,490 jobs$3,850 – $11,500$7,700+1%
Allentown, PA377,180 jobs$3,850 – $11,500$7,700+1%
Harrisburg, PA335,010 jobs$3,800 – $11,500$7,650+1%
Scranton, PA255,620 jobs$3,850 – $11,500$7,650+1%
Lancaster, PA252,230 jobs$3,750 – $11,400$7,550level

Cities with a workforce like Erie's

Big cities and small ones price differently, so here is Erie against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Ocala, FL120,980 jobs$3,400 – $10,300$6,850−9%
Burlington, VT120,150 jobs$3,800 – $11,300$7,550level
Kalamazoo, MI121,790 jobs$3,800 – $11,300$7,550level
Kingsport, TN119,560 jobs$3,550 – $10,700$7,100−6%

Pick a size, pick a tier: aluminum fence pricing in Erie

Three bands are cut from the same cited range and localized for Erie wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.

Basic

$3,800 to $6,800

Standard picket or ornamental, 4 ft

Standard

$6,050 to $9,100

Ornamental pool-code fence, 4-5 ft

Premium

$8,350 to $11,400

Tall privacy slat or custom ornamental

Cost by size and quality level
SizeBasicStandardPremium
pool fence (100 linear ft)$2,550 – $4,550$4,050 – $6,100$5,600 – $7,650
150 ft (150 linear ft)$3,800 – $6,800$6,050 – $9,100$8,350 – $11,400
200 ft (200 linear ft)$5,000 – $9,050$8,050 – $12,100$11,100 – $15,100

Local wages behind the labor line

Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Erie is 0.98 times the national level.

For carpenters (47-2031, weighted 40%) the local median is $27.33 an hour, which is 6% below the national $29.12. The middle half of them earn between $22.37 and $36.03 an hour. BLS counts 530 of them working in the area, 44.0 for every 10,000 jobs (US: 43.1), so the local bench is about average.

Construction laborers (47-2061), 40% of the weighting: a median of $22.35 an hour, in line with the US median of $22.66. The middle half of them earn between $18.41 and $26.60 an hour. About 540 work in the metro. That is 44.8 per 10,000 jobs, compared with 70.5 nationally, so expect fewer local crews to bid.

For sheet metal workers (47-2211, weighted 20%) the local median is $31.59 an hour, which is 6% above the national $29.71. The middle half of them earn between $23.11 and $42.30 an hour. BLS counts 70 of them working in the area, 5.8 for every 10,000 jobs (US: 7.7), so the local bench is thinner than average.

Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($36.03 an hour) instead of the median, the labor line grows by about $310. At the 25th percentile ($22.37) it shrinks by about $180. The total moves by 4.1% or 2.4%, so wages alone rarely explain a quote that is far outside our range.

For context on the local economy, BLS counts 120,480 jobs in the Erie area. That makes it the 181st largest of the 300 metros we cover, with 0.08% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Carpenters (47-2031)40%$22.37$27.33$36.03$29.120.94metro
Construction laborers (47-2061)40%$18.41$22.35$26.60$22.660.99metro
Sheet metal workers (47-2211)20%$23.11$31.59$42.30$29.711.06metro
Blended100%0.98

Aluminum fence: what moves the price in Erie

  • Soil and slope

    Steep slopes and rocky clay can add $15-$20+ per linear foot in labor.

  • Pool codes

    Many codes require a pool barrier with gaps under 4 inches, which influences the style you can buy.

  • Permit

    A fence permit runs $40-$150.

Extras that change the Erie total

Extras are quoted nationally and then scaled to Erie by the average of the local wage index (0.98) and goods index (1.01), a factor of 0.99. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.

Add-on prices
Add-onLocal range
Add one gate (flat)$200 – $900

Related projects, priced for Erie

Because every project leans on different trades, Erie's wage level does not move all prices equally. Against the US midpoint, vinyl fence runs level and chain-link fence −2%.

Related projects with local prices
ProjectSizeRangevs. US
Vinyl fence150 linear ft$4,550 – $9,100level
Wood fence150 linear ft$3,000 – $7,550−2%
Chain-link fence150 linear ft$1,500 – $6,000−2%
Inground pool450 sq ft$35,800 – $112,000−1%

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $6,050 to $9,100 for Erie, PA is attached.

A detailed PDF report of this estimate, $9

The report lays out the aluminum fence numbers for Erie, PA line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Aluminum fence in Erie: your questions

+How much does it cost to install an aluminum fence in Erie?

For 150 linear ft, expect $3,800 to $11,400 in the Erie area. A standard-spec job lands at $6,050 to $9,100. Small jobs usually cost more per linear ft and large ones less.

+What is the price per linear ft for aluminum fence in Erie?

About $25 to $75 per linear ft for materials and labor, plus $35 to $140 for the permit if one is needed. The US range is $25 to $75.

+Is aluminum fence cheaper in Erie or Youngstown?

Youngstown is 75 miles away. The midpoint for 150 linear ft there is $7,250, which is 4% less than Erie ($7,550). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Erie?

About 34% at the midpoint, or $2,600 out of $7,550. Materials are 65% and permits 1%. Nationally, labor is 35%.

+What would 150 ft (150 linear ft) cost in Erie?

$3,800 to $11,400. Pick a different size in the estimator above to get your own number.

+Does aluminum fence need a permit in Erie?

Often, but rules are set by your city or county building office, so call before you hire. Budget $35 to $140 for fees in the Erie area (our national range of $40 to $150 scaled by the local price level).

+Is Erie expensive for aluminum fence compared with the rest of Pennsylvania?

Erie is 0% below the Pennsylvania statewide estimate ($7,600 at the midpoint). We cover 12 metros in Pennsylvania; see the state page to compare them.

+What do carpenters earn in Erie?

The BLS median is $27.33 an hour in the Erie area, compared with $29.12 nationally. The 25th to 75th percentile range is $22.37 to $36.03.

+What do basic and premium aluminum fence work cost in Erie?

For 150 linear ft, basic work runs $3,800 to $6,800 and premium work $8,350 to $11,400. Basic means: standard picket or ornamental, 4 ft. Premium means: tall privacy slat or custom ornamental.

+When is the best time to install an aluminum fence in Erie?

Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are April through November. July and August are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.

+What does "add one gate" add in Erie?

$200 to $900, from a national range scaled by the local wage and goods indexes.

Aluminum fence near Erie

Aluminum fence: all pricesAluminum fence in PennsylvaniaAll projects in EriePennsylvania cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = installed range minus HomeGuide's $10-$25/ft labor range.