Aluminum fence cost in Harrisburg, PA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $3,800 – $11,500
- Per linear ft
- $25 – $75.50
- before permit
- Versus US midpoint
- +1%
- US $7,600
- Rank of 300 metros
- #93
- 1 = most expensive
Harrisburg homeowners pay roughly $3,800 to $11,500 to install an aluminum fence at 150 linear ft, or $25 to $75.50 per linear ft (permit not included). Against the US midpoint, Harrisburg is almost level. Building materials run about 1% above the US average here (BEA goods price index 100.7).
Estimate your aluminum fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Harrisburg, PA, standard level
$6,100 to $9,200
About $40.50 to $60.50 per linear ft before permits. Labor is about 35% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $3,850 | $5,950 |
| Labor | $2,200 | $3,100 |
| Permits and fees | $70 | $120 |
| Total | $6,100 | $9,200 |
Cost breakdown for 150 linear ft in Harrisburg, PA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $2,250 | $4,900 | $7,550 | 64% |
| Labor | $1,500 | $2,650 | $3,800 | 35% |
| Permits and fees | $40 | $95 | $150 | 1% |
| Total | $3,800 | $7,650 | $11,500 | 100% |
Why Harrisburg prices look the way they do
Labor is 35% of the midpoint bill here, against 35% nationally. The mix of trades behind this job is carpenters (40%), construction laborers (40%), sheet metal workers (20%). We weight each trade's local median wage by that share and compare it with the national median. In Harrisburg the blended ratio comes out at 1.01.
On the materials line, the BEA goods price index for the Harrisburg metro is 100.7 (US = 100). The midpoint materials bill for 150 linear ft comes to $4,900, compared with $4,900 at national prices. Permit and inspection fees are scaled by the broader index (98.7) and land at $40 to $150.
When to schedule aluminum fence in Harrisburg
We use NOAA's 1991-2020 climate normals for Harrisburg 1 Ne (in the city). These are 30-year monthly averages, not forecasts.
March through November is the stretch where exterior installation runs into the fewest weather problems in Harrisburg (9 of 12 months). January, February and December have an average daytime high under 45°F.
In January, February and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Harrisburg gets about 45 inches of precipitation in a normal year, including roughly 24 inches of snow. The wettest months are July, August and September (4.8 inches in July). Inside the workable window, October and November are the driest, at 3.8 and 2.9 inches. The station averages about 18 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 37 | 22 | 2.9 | Cold |
| Feb | 40 | 23 | 2.8 | Cold |
| Mar | 48 | 30 | 3.9 | Workable |
| Apr | 61 | 40 | 3.9 | Workable |
| May | 72 | 51 | 4.0 | Workable |
| Jun | 81 | 60 | 4.0 | Workable |
| Jul | 85 | 65 | 4.8 | Workable |
| Aug | 83 | 62 | 4.3 | Workable |
| Sep | 75 | 55 | 4.6 | Workable |
| Oct | 63 | 43 | 3.8 | Workable |
| Nov | 51 | 34 | 2.9 | Workable |
| Dec | 41 | 27 | 3.4 | Cold |
What nearby projects cost in Harrisburg
Because every project leans on different trades, Harrisburg's wage level does not move all prices equally. Against the US midpoint, inground pool runs +4% and wood fence level.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Vinyl fence | 150 linear ft | $4,550 – $9,200 | +1% |
| Wood fence | 150 linear ft | $3,050 – $7,650 | level |
| Chain-link fence | 150 linear ft | $1,550 – $6,200 | +1% |
| Inground pool | 450 sq ft | $37,400 – $117,000 | +4% |
Add-ons priced for Harrisburg
Extras are quoted nationally and then scaled to Harrisburg by the average of the local wage index (1.01) and goods index (1.01), a factor of 1.01. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $200 – $910 |
Pick a size, pick a tier: aluminum fence pricing in Harrisburg
Three bands are cut from the same cited range and localized for Harrisburg wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.
Basic
$3,800 to $6,900
Standard picket or ornamental, 4 ft
Standard
$6,100 to $9,200
Ornamental pool-code fence, 4-5 ft
Premium
$8,400 to $11,500
Tall privacy slat or custom ornamental
| Size | Basic | Standard | Premium |
|---|---|---|---|
| pool fence (100 linear ft) | $2,550 – $4,600 | $4,100 – $6,150 | $5,650 – $7,700 |
| 150 ft (150 linear ft) | $3,800 – $6,900 | $6,100 – $9,200 | $8,400 – $11,500 |
| 200 ft (200 linear ft) | $5,100 – $9,150 | $8,150 – $12,200 | $11,200 – $15,300 |
Local wages behind the labor line
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Harrisburg is 1.01 times the national level.
For carpenters (47-2031, weighted 40%) the local median is $27.74 an hour, which is 5% below the national $29.12. The middle half of them earn between $23.14 and $34.00 an hour. BLS counts 1,320 of them working in the area, 39.4 for every 10,000 jobs (US: 43.1), so the local bench is about average.
Construction laborers (47-2061), 40% of the weighting: a median of $23.88 an hour, 5% above the US median of $22.66. The middle half of them earn between $22.00 and $27.94 an hour. About 1,370 work in the metro. That is 40.9 per 10,000 jobs, compared with 70.5 nationally, so expect fewer local crews to bid.
For sheet metal workers (47-2211, weighted 20%) the local median is $30.57 an hour, which is in line with the national $29.71. The middle half of them earn between $26.36 and $42.58 an hour. BLS counts 180 of them working in the area, 5.4 for every 10,000 jobs (US: 7.7), so the local bench is thinner than average.
Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($34.00 an hour) instead of the median, the labor line grows by about $230. At the 25th percentile ($23.14) it shrinks by about $170. The total moves by 3.0% or 2.2%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 335,010 jobs in the Harrisburg-Carlisle area. That makes it the 78th largest of the 300 metros we cover, with 0.22% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 40% | $23.14 | $27.74 | $34.00 | $29.12 | 0.95 | metro |
| Construction laborers (47-2061) | 40% | $22.00 | $23.88 | $27.94 | $22.66 | 1.05 | metro |
| Sheet metal workers (47-2211) | 20% | $26.36 | $30.57 | $42.58 | $29.71 | 1.03 | metro |
| Blended | 100% | 1.01 | |||||
Harrisburg against nearby metros and the rest of Pennsylvania
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 150 linear ft range from $7,400 to $7,700 across Harrisburg and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Harrisburg, PAthis page | $3,800 – $11,500 | $7,650 | |
| York, PA35 miles | $3,850 – $11,500 | $7,650 | level |
| Chambersburg, PA45 miles | $3,700 – $11,100 | $7,400 | −3% |
| Lancaster, PA45 miles | $3,750 – $11,400 | $7,550 | −1% |
| State College, PA60 miles | $3,850 – $11,500 | $7,700 | level |
| Reading, PA60 miles | $3,800 – $11,400 | $7,600 | level |
| Pennsylvania (statewide) | $3,800 – $11,400 | $7,600 | −1% |
| United States | $3,800 – $11,400 | $7,600 | −1% |
Across 300 US metros, Harrisburg comes in at #93 from the top. The priciest is Honolulu, HI at $9,700; the cheapest is Brownsville, TX at $6,500 (midpoints, 150 linear ft). Statewide, Harrisburg is 1% above the Pennsylvania figure.
Other Pennsylvania metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Philadelphia, PA | 2,897,830 jobs | $3,900 – $11,600 | $7,750 | +2% |
| Pittsburgh, PA | 1,114,490 jobs | $3,850 – $11,500 | $7,700 | level |
| Allentown, PA | 377,180 jobs | $3,850 – $11,500 | $7,700 | level |
| Scranton, PA | 255,620 jobs | $3,850 – $11,500 | $7,650 | level |
| Lancaster, PA | 252,230 jobs | $3,750 – $11,400 | $7,550 | −1% |
| York, PA | 183,590 jobs | $3,850 – $11,500 | $7,650 | level |
Cities with a workforce like Harrisburg's
Big cities and small ones price differently, so here is Harrisburg against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Bakersfield, CA | 338,230 jobs | $4,150 – $12,400 | $8,250 | +8% |
| Oxnard, CA | 323,890 jobs | $4,200 – $12,500 | $8,350 | +9% |
| El Paso, TX | 339,120 jobs | $3,250 – $9,950 | $6,600 | −14% |
| Akron, OH | 319,560 jobs | $3,850 – $11,500 | $7,650 | level |
Why two Harrisburg quotes can differ
Soil and slope
Steep slopes and rocky clay can add $15-$20+ per linear foot in labor.
Pool codes
Many codes require a pool barrier with gaps under 4 inches, which influences the style you can buy.
Permit
A fence permit runs $40-$150.
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $6,100 to $9,200 for Harrisburg, PA is attached.
Take this estimate with you: PDF report, $9
The report lays out the aluminum fence numbers for Harrisburg, PA line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Aluminum fence in Harrisburg: your questions
+How much does it cost to install an aluminum fence in Harrisburg?
For 150 linear ft, expect $3,800 to $11,500 in the Harrisburg area. A standard-spec job lands at $6,100 to $9,200. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for aluminum fence in Harrisburg?
About $25 to $75.50 per linear ft for materials and labor, plus $40 to $150 for the permit if one is needed. The US range is $25 to $75.
+Is aluminum fence cheaper in Harrisburg or York?
York is 35 miles away. The midpoint for 150 linear ft there is $7,650, which is 0% more than Harrisburg ($7,650). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Harrisburg?
About 35% at the midpoint, or $2,650 out of $7,650. Materials are 64% and permits 1%. Nationally, labor is 35%.
+What would 150 ft (150 linear ft) cost in Harrisburg?
$3,800 to $11,500. Pick a different size in the estimator above to get your own number.
+Does aluminum fence need a permit in Harrisburg?
Often, but rules are set by your city or county building office, so call before you hire. Budget $40 to $150 for fees in the Harrisburg area (our national range of $40 to $150 scaled by the local price level).
+Is Harrisburg expensive for aluminum fence compared with the rest of Pennsylvania?
Harrisburg is 1% above the Pennsylvania statewide estimate ($7,600 at the midpoint). We cover 12 metros in Pennsylvania; see the state page to compare them.
+What do carpenters earn in Harrisburg?
The BLS median is $27.74 an hour in the Harrisburg area, compared with $29.12 nationally. The 25th to 75th percentile range is $23.14 to $34.00.
+What do basic and premium aluminum fence work cost in Harrisburg?
For 150 linear ft, basic work runs $3,800 to $6,900 and premium work $8,400 to $11,500. Basic means: standard picket or ornamental, 4 ft. Premium means: tall privacy slat or custom ornamental.
+When is the best time to install an aluminum fence in Harrisburg?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through November. October and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Harrisburg?
$200 to $910, from a national range scaled by the local wage and goods indexes.
Aluminum fence near Harrisburg
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does an Aluminum Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus HomeGuide's $10-$25/ft labor range.