Aluminum fence cost in St. Cloud, MN
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $3,850 – $11,500
- Per linear ft
- $25.50 – $76
- before permit
- Versus US midpoint
- +1%
- US $7,600
- Rank of 300 metros
- #81
- 1 = most expensive
If you want to install an aluminum fence in St. Cloud, plan on $3,850 to $11,500 for 150 linear ft, all in. Per linear ft, that is $25.50 to $76 for materials and labor, with the permit on top. The local midpoint lands close to the national one. Carpenters earn a median of $29.14 an hour in the St. Cloud area, 0% above the US median of $29.12.
Estimate your aluminum fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in St. Cloud, MN, standard level
$6,150 to $9,200
About $40.50 to $61 per linear ft before permits. Labor is about 38% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $3,650 | $5,650 |
| Labor | $2,450 | $3,450 |
| Permits and fees | $65 | $100 |
| Total | $6,150 | $9,200 |
Cost breakdown for 150 linear ft in St. Cloud, MN
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $2,150 | $4,650 | $7,150 | 60% |
| Labor | $1,700 | $2,950 | $4,250 | 38% |
| Permits and fees | $35 | $85 | $130 | 1% |
| Total | $3,850 | $7,700 | $11,500 | 100% |
Why St. Cloud prices look the way they do
The wage side of the estimate leans on carpenters, who do 40% of the hours on a typical job. Their local median is $29.14 an hour. Add the other trades involved and the blended wage index for St. Cloud is 1.13 (US = 1.00), which puts labor at 38% of the total.
On the materials line, the BEA goods price index for the St. Cloud metro is 95.4 (US = 100). The midpoint materials bill for 150 linear ft comes to $4,650, compared with $4,900 at national prices. Permit and inspection fees are scaled by the broader index (87.6) and land at $35 to $130.
Data note: 20% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in St. Cloud. The wage table below marks each row.
Add-ons priced for St. Cloud
Extras are quoted nationally and then scaled to St. Cloud by the average of the local wage index (1.13) and goods index (0.95), a factor of 1.04. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $210 – $940 |
St. Cloud labor market for aluminum fence
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for St. Cloud is 1.13 times the national level.
For carpenters (47-2031, weighted 40%) the local median is $29.14 an hour, which is in line with the national $29.12. The middle half of them earn between $23.37 and $36.78 an hour. BLS counts 570 of them working in the area, 54.8 for every 10,000 jobs (US: 43.1), so the local bench is deeper than average.
Construction laborers (47-2061), 40% of the weighting: a median of $27.80 an hour, 23% above the US median of $22.66. The middle half of them earn between $23.11 and $36.92 an hour. About 1,470 work in the metro. That is 141.5 per 10,000 jobs, compared with 70.5 nationally, which suggests plenty of local crews to bid.
Sheet metal workers (47-2211) carry 20% of the labor weighting. BLS does not publish this trade for the St. Cloud metro, so we used the Minnesota statewide median: $35.08 an hour against $29.71 for the US. The middle half of them earn between $24.79 and $51.38 an hour.
Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($36.78 an hour) instead of the median, the labor line grows by about $280. At the 25th percentile ($23.37) it shrinks by about $210. The total moves by 3.6% or 2.7%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 103,920 jobs in the St. Cloud area. That makes it the 197th largest of the 300 metros we cover, with 0.07% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 40% | $23.37 | $29.14 | $36.78 | $29.12 | 1.00 | metro |
| Construction laborers (47-2061) | 40% | $23.11 | $27.80 | $36.92 | $22.66 | 1.23 | metro |
| Sheet metal workers (47-2211) | 20% | $24.79 | $35.08 | $51.38 | $29.71 | 1.18 | state |
| Blended | 100% | 1.13 | |||||
Why two St. Cloud quotes can differ
Permit
A fence permit runs $40-$150.
Style
Aluminum picket runs $25-$50 per linear foot installed, ornamental fence $40-$75, and privacy designs $75-$130 (HomeGuide).
Soil and slope
Steep slopes and rocky clay can add $15-$20+ per linear foot in labor.
Climate in St. Cloud: timing your aluminum fence job
We use NOAA's 1991-2020 climate normals for St Cloud Rgnl Ap (5 miles from the city center). These are 30-year monthly averages, not forecasts.
April through October is the stretch where exterior installation runs into the fewest weather problems in St. Cloud (7 of 12 months). January, February, March, November and December have an average daytime high under 45°F.
In January, February, March, November and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
St. Cloud gets about 28 inches of precipitation in a normal year, including roughly 48 inches of snow. The wettest months are May, June and August (4.0 inches in August). Inside the workable window, April and October are the driest, at 2.6 and 2.6 inches. The station averages about 9 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 21 | 3 | 0.7 | Cold |
| Feb | 26 | 7 | 0.8 | Cold |
| Mar | 39 | 20 | 1.6 | Cold |
| Apr | 54 | 32 | 2.6 | Workable |
| May | 68 | 45 | 3.7 | Workable |
| Jun | 77 | 55 | 3.8 | Workable |
| Jul | 82 | 59 | 3.6 | Workable |
| Aug | 79 | 56 | 4.0 | Workable |
| Sep | 71 | 48 | 3.0 | Workable |
| Oct | 56 | 36 | 2.6 | Workable |
| Nov | 39 | 23 | 1.4 | Cold |
| Dec | 26 | 10 | 0.9 | Cold |
What nearby projects cost in St. Cloud
Because every project leans on different trades, St. Cloud's wage level does not move all prices equally. Against the US midpoint, inground pool runs +14% and vinyl fence −1%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Vinyl fence | 150 linear ft | $4,450 – $9,100 | −1% |
| Wood fence | 150 linear ft | $3,100 – $7,700 | +1% |
| Chain-link fence | 150 linear ft | $1,600 – $6,600 | +6% |
| Inground pool | 450 sq ft | $41,100 – $128,000 | +14% |
Is St. Cloud cheap or dear? The local comparison
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 150 linear ft range from $7,550 to $8,400 across St. Cloud and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| St. Cloud, MNthis page | $3,850 – $11,500 | $7,700 | |
| Minneapolis, MN70 miles | $4,250 – $12,600 | $8,400 | +9% |
| Fargo, ND150 miles | $3,800 – $11,300 | $7,550 | −2% |
| Rochester, MN155 miles | $3,950 – $11,700 | $7,800 | +1% |
| Duluth, MN155 miles | $4,000 – $11,800 | $7,900 | +2% |
| Eau Claire, WI160 miles | $3,850 – $11,400 | $7,650 | −1% |
| Minnesota (statewide) | $4,050 – $12,100 | $8,100 | +5% |
| United States | $3,800 – $11,400 | $7,600 | −1% |
Across 300 US metros, St. Cloud comes in at #81 from the top. The priciest is Honolulu, HI at $9,700; the cheapest is Brownsville, TX at $6,500 (midpoints, 150 linear ft). Statewide, St. Cloud is 5% below the Minnesota figure.
Other Minnesota metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Minneapolis, MN | 1,951,650 jobs | $4,250 – $12,600 | $8,400 | +9% |
| Duluth, MN | 124,710 jobs | $4,000 – $11,800 | $7,900 | +2% |
| Rochester, MN | 122,980 jobs | $3,950 – $11,700 | $7,800 | +1% |
Cities with a workforce like St. Cloud's
Big cities and small ones price differently, so here is St. Cloud against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Champaign, IL | 105,500 jobs | $4,000 – $11,800 | $7,950 | +3% |
| Gainesville, GA | 103,870 jobs | $3,400 – $10,300 | $6,850 | −11% |
| Hagerstown, MD | 107,170 jobs | $3,600 – $10,900 | $7,250 | −6% |
| Charleston, WV | 103,450 jobs | $3,650 – $10,900 | $7,250 | −6% |
Pick a size, pick a tier: aluminum fence pricing in St. Cloud
Three bands are cut from the same cited range and localized for St. Cloud wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.
Basic
$3,850 to $6,950
Standard picket or ornamental, 4 ft
Standard
$6,150 to $9,200
Ornamental pool-code fence, 4-5 ft
Premium
$8,450 to $11,500
Tall privacy slat or custom ornamental
| Size | Basic | Standard | Premium |
|---|---|---|---|
| pool fence (100 linear ft) | $2,600 – $4,650 | $4,150 – $6,200 | $5,650 – $7,700 |
| 150 ft (150 linear ft) | $3,850 – $6,950 | $6,150 – $9,200 | $8,450 – $11,500 |
| 200 ft (200 linear ft) | $5,150 – $9,200 | $8,200 – $12,300 | $11,200 – $15,300 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $6,150 to $9,200 for St. Cloud, MN is attached.
Take this estimate with you: PDF report, $9
Multi-page report for St. Cloud, MN: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Aluminum fence in St. Cloud: your questions
+How much does it cost to install an aluminum fence in St. Cloud?
For 150 linear ft, expect $3,850 to $11,500 in the St. Cloud area. A standard-spec job lands at $6,150 to $9,200. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for aluminum fence in St. Cloud?
About $25.50 to $76 per linear ft for materials and labor, plus $35 to $130 for the permit if one is needed. The US range is $25 to $75.
+Is aluminum fence cheaper in St. Cloud or Minneapolis?
Minneapolis is 70 miles away. The midpoint for 150 linear ft there is $8,400, which is 9% more than St. Cloud ($7,700). Wage and materials indexes both feed that gap.
+How much of the bill is labor in St. Cloud?
About 38% at the midpoint, or $2,950 out of $7,700. Materials are 60% and permits 1%. Nationally, labor is 35%.
+What would 150 ft (150 linear ft) cost in St. Cloud?
$3,850 to $11,500. Pick a different size in the estimator above to get your own number.
+Does aluminum fence need a permit in St. Cloud?
Often, but rules are set by your city or county building office, so call before you hire. Budget $35 to $130 for fees in the St. Cloud area (our national range of $40 to $150 scaled by the local price level).
+Is St. Cloud expensive for aluminum fence compared with the rest of Minnesota?
St. Cloud is 5% below the Minnesota statewide estimate ($8,100 at the midpoint). We cover 4 metros in Minnesota; see the state page to compare them.
+What do carpenters earn in St. Cloud?
The BLS median is $29.14 an hour in the St. Cloud area, compared with $29.12 nationally. The 25th to 75th percentile range is $23.37 to $36.78.
+What do basic and premium aluminum fence work cost in St. Cloud?
For 150 linear ft, basic work runs $3,850 to $6,950 and premium work $8,450 to $11,500. Basic means: standard picket or ornamental, 4 ft. Premium means: tall privacy slat or custom ornamental.
+When is the best time to install an aluminum fence in St. Cloud?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are April through October. April and October are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in St. Cloud?
$210 to $940, from a national range scaled by the local wage and goods indexes.
Aluminum fence near St. Cloud
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does an Aluminum Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus HomeGuide's $10-$25/ft labor range.