Aluminum fence cost in Rochester, MN
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $3,950 – $11,700
- Per linear ft
- $26 – $77
- before permit
- Versus US midpoint
- +3%
- US $7,600
- Rank of 300 metros
- #69
- 1 = most expensive
If you want to install an aluminum fence in Rochester, plan on $3,950 to $11,700 for 150 linear ft, all in. Per linear ft, that is $26 to $77 for materials and labor, with the permit on top. The local midpoint lands close to the national one. Carpenters earn a median of $30.58 an hour in the Rochester area, 5% above the US median of $29.12.
Estimate your aluminum fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Rochester, MN, standard level
$6,250 to $9,350
About $41 to $61.50 per linear ft before permits. Labor is about 39% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $3,650 | $5,650 |
| Labor | $2,550 | $3,550 |
| Permits and fees | $65 | $110 |
| Total | $6,250 | $9,350 |
Cost breakdown for 150 linear ft in Rochester, MN
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $2,150 | $4,650 | $7,150 | 60% |
| Labor | $1,750 | $3,050 | $4,350 | 39% |
| Permits and fees | $35 | $85 | $140 | 1% |
| Total | $3,950 | $7,800 | $11,700 | 100% |
Why Rochester prices look the way they do
We price the labor side from BLS wage data for 3 trades: carpenters at 40%, construction laborers at 40%, sheet metal workers at 20%. Weighted together, Rochester wages are 1.16 times the national level. Labor makes up about 39% of the midpoint estimate (35% at national prices).
On the materials line, the BEA goods price index for the Rochester metro is 95.4 (US = 100). The midpoint materials bill for 150 linear ft comes to $4,650, compared with $4,900 at national prices. Permit and inspection fees are scaled by the broader index (90.8) and land at $35 to $140.
Rochester labor market for aluminum fence
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Rochester is 1.16 times the national level.
For carpenters (47-2031, weighted 40%) the local median is $30.58 an hour, which is 5% above the national $29.12. The middle half of them earn between $23.59 and $38.84 an hour. BLS counts 460 of them working in the area, 37.4 for every 10,000 jobs (US: 43.1), so the local bench is about average.
Construction laborers (47-2061), 40% of the weighting: a median of $28.55 an hour, 26% above the US median of $22.66. The middle half of them earn between $22.36 and $43.11 an hour. About 990 work in the metro. That is 80.5 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.
For sheet metal workers (47-2211, weighted 20%) the local median is $35.42 an hour, which is 19% above the national $29.71. The middle half of them earn between $32.29 and $35.42 an hour. BLS counts 60 of them working in the area, 4.9 for every 10,000 jobs (US: 7.7), so the local bench is thinner than average.
Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($38.84 an hour) instead of the median, the labor line grows by about $300. At the 25th percentile ($23.59) it shrinks by about $250. The total moves by 3.8% or 3.2%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 122,980 jobs in the Rochester area. That makes it the 176th largest of the 300 metros we cover, with 0.08% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 40% | $23.59 | $30.58 | $38.84 | $29.12 | 1.05 | metro |
| Construction laborers (47-2061) | 40% | $22.36 | $28.55 | $43.11 | $22.66 | 1.26 | metro |
| Sheet metal workers (47-2211) | 20% | $32.29 | $35.42 | $35.42 | $29.71 | 1.19 | metro |
| Blended | 100% | 1.16 | |||||
Climate in Rochester: timing your aluminum fence job
We use NOAA's 1991-2020 climate normals for Rochester Intl Ap (10 miles from the city center). These are 30-year monthly averages, not forecasts.
April through October is the stretch where exterior installation runs into the fewest weather problems in Rochester (7 of 12 months). January, February, March, November and December have an average daytime high under 45°F.
In January, February, March, November and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Rochester gets about 35 inches of precipitation in a normal year, including roughly 53 inches of snow. The wettest months are May, June and July (5.3 inches in June). Inside the workable window, April and October are the driest, at 3.5 and 2.4 inches. The station averages about 5 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 23 | 7 | 1.0 | Cold |
| Feb | 27 | 11 | 1.0 | Cold |
| Mar | 40 | 23 | 2.0 | Cold |
| Apr | 55 | 35 | 3.5 | Workable |
| May | 68 | 47 | 4.3 | Workable |
| Jun | 78 | 58 | 5.3 | Workable |
| Jul | 80 | 61 | 4.2 | Workable |
| Aug | 78 | 58 | 4.1 | Workable |
| Sep | 72 | 50 | 3.6 | Workable |
| Oct | 58 | 38 | 2.4 | Workable |
| Nov | 42 | 26 | 1.8 | Cold |
| Dec | 28 | 14 | 1.3 | Cold |
Rochester against nearby metros and the rest of Minnesota
Same job, same size (150 linear ft), priced for the nearest metros. Minneapolis is the priciest of the group at $8,400. Waterloo is the cheapest at $7,250.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Rochester, MNthis page | $3,950 – $11,700 | $7,800 | |
| La Crosse, WI65 miles | $3,850 – $11,400 | $7,650 | −2% |
| Eau Claire, WI85 miles | $3,850 – $11,400 | $7,650 | −2% |
| Minneapolis, MN90 miles | $4,250 – $12,600 | $8,400 | +8% |
| Waterloo, IA100 miles | $3,650 – $10,900 | $7,250 | −7% |
| Dubuque, IA125 miles | $3,700 – $11,000 | $7,350 | −6% |
| Minnesota (statewide) | $4,050 – $12,100 | $8,100 | +4% |
| United States | $3,800 – $11,400 | $7,600 | −3% |
Across 300 US metros, Rochester comes in at #69 from the top. The priciest is Honolulu, HI at $9,700; the cheapest is Brownsville, TX at $6,500 (midpoints, 150 linear ft). Statewide, Rochester is 4% below the Minnesota figure.
Other Minnesota metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Minneapolis, MN | 1,951,650 jobs | $4,250 – $12,600 | $8,400 | +8% |
| Duluth, MN | 124,710 jobs | $4,000 – $11,800 | $7,900 | +1% |
| St. Cloud, MN | 103,920 jobs | $3,850 – $11,500 | $7,700 | −1% |
Cities with a workforce like Rochester's
Big cities and small ones price differently, so here is Rochester against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Amarillo, TX | 123,930 jobs | $3,350 – $10,200 | $6,800 | −13% |
| Midland, TX | 122,180 jobs | $3,500 – $10,600 | $7,050 | −9% |
| Appleton, WI | 124,230 jobs | $3,900 – $11,600 | $7,750 | level |
| San Luis Obispo, CA | 122,020 jobs | $4,300 – $12,800 | $8,550 | +10% |
Add-ons priced for Rochester
Extras are quoted nationally and then scaled to Rochester by the average of the local wage index (1.16) and goods index (0.95), a factor of 1.06. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $210 – $950 |
Pick a size, pick a tier: aluminum fence pricing in Rochester
Three bands are cut from the same cited range and localized for Rochester wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.
Basic
$3,950 to $7,000
Standard picket or ornamental, 4 ft
Standard
$6,250 to $9,350
Ornamental pool-code fence, 4-5 ft
Premium
$8,550 to $11,700
Tall privacy slat or custom ornamental
| Size | Basic | Standard | Premium |
|---|---|---|---|
| pool fence (100 linear ft) | $2,650 – $4,700 | $4,200 – $6,250 | $5,750 – $7,800 |
| 150 ft (150 linear ft) | $3,950 – $7,000 | $6,250 – $9,350 | $8,550 – $11,700 |
| 200 ft (200 linear ft) | $5,200 – $9,350 | $8,300 – $12,400 | $11,400 – $15,500 |
Planning more than one job in Rochester?
Because every project leans on different trades, Rochester's wage level does not move all prices equally. Against the US midpoint, inground pool runs +15% and vinyl fence level.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Vinyl fence | 150 linear ft | $4,500 – $9,200 | level |
| Wood fence | 150 linear ft | $3,150 – $7,850 | +3% |
| Chain-link fence | 150 linear ft | $1,600 – $6,750 | +9% |
| Inground pool | 450 sq ft | $41,700 – $130,000 | +15% |
Aluminum fence: what moves the price in Rochester
Permit
A fence permit runs $40-$150.
Style
Aluminum picket runs $25-$50 per linear foot installed, ornamental fence $40-$75, and privacy designs $75-$130 (HomeGuide).
Soil and slope
Steep slopes and rocky clay can add $15-$20+ per linear foot in labor.
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $6,250 to $9,350 for Rochester, MN is attached.
Take this estimate with you: PDF report, $9
The report lays out the aluminum fence numbers for Rochester, MN line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Aluminum fence in Rochester: your questions
+How much does it cost to install an aluminum fence in Rochester?
For 150 linear ft, expect $3,950 to $11,700 in the Rochester area. A standard-spec job lands at $6,250 to $9,350. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for aluminum fence in Rochester?
About $26 to $77 per linear ft for materials and labor, plus $35 to $140 for the permit if one is needed. The US range is $25 to $75.
+Is aluminum fence cheaper in Rochester or La Crosse?
La Crosse is 65 miles away. The midpoint for 150 linear ft there is $7,650, which is 2% less than Rochester ($7,800). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Rochester?
About 39% at the midpoint, or $3,050 out of $7,800. Materials are 60% and permits 1%. Nationally, labor is 35%.
+What would 150 ft (150 linear ft) cost in Rochester?
$3,950 to $11,700. Pick a different size in the estimator above to get your own number.
+Does aluminum fence need a permit in Rochester?
Often, but rules are set by your city or county building office, so call before you hire. Budget $35 to $140 for fees in the Rochester area (our national range of $40 to $150 scaled by the local price level).
+Is Rochester expensive for aluminum fence compared with the rest of Minnesota?
Rochester is 4% below the Minnesota statewide estimate ($8,100 at the midpoint). We cover 4 metros in Minnesota; see the state page to compare them.
+What do carpenters earn in Rochester?
The BLS median is $30.58 an hour in the Rochester area, compared with $29.12 nationally. The 25th to 75th percentile range is $23.59 to $38.84.
+What do basic and premium aluminum fence work cost in Rochester?
For 150 linear ft, basic work runs $3,950 to $7,000 and premium work $8,550 to $11,700. Basic means: standard picket or ornamental, 4 ft. Premium means: tall privacy slat or custom ornamental.
+When is the best time to install an aluminum fence in Rochester?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are April through October. April and October are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Rochester?
$210 to $950, from a national range scaled by the local wage and goods indexes.
Aluminum fence near Rochester
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does an Aluminum Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus HomeGuide's $10-$25/ft labor range.