Skip to content
CostLocal

Aluminum fence cost in Muskegon, MI

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (150 linear ft)
$3,600 – $10,900
Per linear ft
$24 – $71.50
before permit
Versus US midpoint
−5%
US $7,600
Rank of 300 metros
#162
1 = most expensive

Local price for an aluminum fence in the Muskegon area: $3,600 to $10,900 for 150 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 5% lower than the US figure. Building materials run about 6% below the US average here (BEA goods price index 93.7).

Estimate your aluminum fence cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Ornamental pool-code fence, 4-5 ft

Add-ons

Estimated cost for 150 linear ft in Muskegon, MI, standard level

$5,800 to $8,700

About $38 to $57 per linear ft before permits. Labor is about 36% of the bill.

Cost breakdown
PartLowHigh
Materials$3,600$5,550
Labor$2,150$3,000
Permits and fees$70$110
Total$5,800$8,700
Save and get a PDF report

Cost breakdown for 150 linear ft in Muskegon, MI

Part of the jobLowMidpointHighShare
Materials$2,100$4,550$7,05063%
Labor$1,450$2,600$3,70036%
Permits and fees$35$90$1401%
Total$3,600$7,250$10,900100%

What is behind the Muskegon number

We price the labor side from BLS wage data for 3 trades: carpenters at 40%, construction laborers at 40%, sheet metal workers at 20%. Weighted together, Muskegon wages are 0.98 times the national level. Labor makes up about 36% of the midpoint estimate (35% at national prices).

Materials are scaled with BEA's regional price parity for goods. Muskegon is at 93.7 against 100 for the US, so a materials line of $4,900 nationally becomes $4,550 here (midpoint, 150 linear ft). Permits follow the all-items index of 92.5: $35 to $140.

The best months for aluminum fence in Muskegon

Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Muskegon Co Ap (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.

For exterior installation, the comfortable months in Muskegon are April through November: 8 of 12. Outside them, January, February, March and December have an average daytime high under 45°F.

In January, February, March and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.

Muskegon gets about 35 inches of precipitation in a normal year, including roughly 87 inches of snow. The wettest months are April, May and October (3.8 inches in October). Inside the workable window, July and November are the driest, at 2.8 and 2.9 inches. The station averages about 3 days a year at 90°F or above.

We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.

Monthly normals, Muskegon Co Ap (NOAA, 1991-2020)
MonthAvg high °FAvg low °FPrecip (in)For this job
Jan33212.4Cold
Feb35212.1Cold
Mar44272.4Cold
Apr57373.5Workable
May68483.4Workable
Jun78573.0Workable
Jul82622.8Workable
Aug80613.1Workable
Sep73543.3Workable
Oct61433.8Workable
Nov48342.9Workable
Dec37262.4Cold

Who does the work: Muskegon trade wages

The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Muskegon the blend is 0.98.

Carpenters (47-2031), 40% of the weighting: a median of $23.47 an hour, 19% below the US median of $29.12. The middle half of them earn between $21.00 and $29.72 an hour. About 140 work in the metro. That is 22.5 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.

For construction laborers (47-2061, weighted 40%) the local median is $22.60 an hour, which is in line with the national $22.66. The middle half of them earn between $18.99 and $28.27 an hour. BLS counts 270 of them working in the area, 43.3 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.

Sheet metal workers (47-2211), 20% of the weighting: a median of $38.89 an hour, 31% above the US median of $29.71. The middle half of them earn between $22.58 and $41.00 an hour. About 150 work in the metro. That is 24.1 per 10,000 jobs, compared with 7.7 nationally, which suggests plenty of local crews to bid.

A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $230 to the midpoint estimate; the 25th percentile takes off about $90. That is a swing of roughly 1.2% to 3.1% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.

Muskegon-Norton Shores has 62,340 jobs in total (BLS, May 2025), ranking 278th by size among the 300 metros on this site.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Carpenters (47-2031)40%$21.00$23.47$29.72$29.120.81metro
Construction laborers (47-2061)40%$18.99$22.60$28.27$22.661.00metro
Sheet metal workers (47-2211)20%$22.58$38.89$41.00$29.711.31metro
Blended100%0.98

Optional extras in Muskegon

Add-ons start from national price ranges and are scaled by 0.96 for Muskegon, which is the average of the area's wage index (0.98) and goods price index (0.94). The estimator above can add them to your total.

Add-on prices
Add-onLocal range
Add one gate (flat)$190 – $860

How Muskegon compares

Of the five closest metros, 1 is cheaper than Muskegon. Grand Rapids is the lowest at about $7,200 (midpoint, 150 linear ft), 45 miles away.

Comparison with nearby areas
AreaRangeMidpointvs. here
Muskegon, MIthis page$3,600 – $10,900$7,250
Grand Rapids, MI45 miles$3,600 – $10,800$7,200−1%
Sheboygan, WI70 miles$3,900 – $11,500$7,700+7%
Milwaukee, WI80 miles$3,900 – $11,500$7,700+7%
Racine, WI80 miles$3,800 – $11,400$7,600+5%
Kalamazoo, MI95 miles$3,800 – $11,300$7,550+4%
Michigan (statewide)$3,750 – $11,200$7,500+4%
United States$3,800 – $11,400$7,600+5%

Out of the 300 metros we cover, Muskegon ranks #162 for the cost of this job (#1 is the most expensive). Statewide, Muskegon is 3% below the Michigan figure.

Elsewhere in Michigan

Michigan metros compared with Muskegon
MetroSizeRangeMidpointvs. here
Detroit, MI1,904,530 jobs$4,000 – $11,900$7,950+10%
Grand Rapids, MI598,260 jobs$3,600 – $10,800$7,200−1%
Ann Arbor, MI219,730 jobs$3,800 – $11,300$7,550+5%
Lansing, MI217,180 jobs$3,850 – $11,500$7,650+6%
Flint, MI135,040 jobs$3,900 – $11,500$7,700+6%
Kalamazoo, MI121,790 jobs$3,800 – $11,300$7,550+4%

Metros of a similar size

Big cities and small ones price differently, so here is Muskegon against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Terre Haute, IN65,120 jobs$3,700 – $11,100$7,400+2%
Vineland, NJ62,300 jobs$4,450 – $13,000$8,700+20%
Dalton, GA65,300 jobs$3,350 – $10,200$6,800−6%
Hattiesburg, MS62,230 jobs$3,350 – $10,300$6,850−6%

What nearby projects cost in Muskegon

Jobs that often go together with aluminum fence are priced below at their usual sizes, using the same Muskegon wage and price inputs. Compared with national midpoints, inground pool comes out highest (−2%) and wood fence lowest (−9%); the gap comes from the trades each job uses.

Related projects with local prices
ProjectSizeRangevs. US
Vinyl fence150 linear ft$4,250 – $8,500−7%
Wood fence150 linear ft$2,750 – $7,000−9%
Chain-link fence150 linear ft$1,450 – $5,700−7%
Inground pool450 sq ft$35,400 – $110,500−2%

Pick a size, pick a tier: aluminum fence pricing in Muskegon

The cited range is split into basic, standard and premium bands, then scaled to Muskegon. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from pool fence (100 linear ft) to 200 ft (200 linear ft).

Basic

$3,600 to $6,500

Standard picket or ornamental, 4 ft

Standard

$5,800 to $8,700

Ornamental pool-code fence, 4-5 ft

Premium

$7,950 to $10,900

Tall privacy slat or custom ornamental

Cost by size and quality level
SizeBasicStandardPremium
pool fence (100 linear ft)$2,450 – $4,350$3,900 – $5,850$5,350 – $7,300
150 ft (150 linear ft)$3,600 – $6,500$5,800 – $8,700$7,950 – $10,900
200 ft (200 linear ft)$4,800 – $8,650$7,700 – $11,500$10,600 – $14,400

Specs and site conditions that change a Muskegon bid

  • Soil and slope

    Steep slopes and rocky clay can add $15-$20+ per linear foot in labor.

  • Pool codes

    Many codes require a pool barrier with gaps under 4 inches, which influences the style you can buy.

  • Permit

    A fence permit runs $40-$150.

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,800 to $8,700 for Muskegon, MI is attached.

Take this estimate with you: PDF report, $9

The report lays out the aluminum fence numbers for Muskegon, MI line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Aluminum fence in Muskegon: your questions

+How much does it cost to install an aluminum fence in Muskegon?

For 150 linear ft, expect $3,600 to $10,900 in the Muskegon area. A standard-spec job lands at $5,800 to $8,700. Small jobs usually cost more per linear ft and large ones less.

+What is the price per linear ft for aluminum fence in Muskegon?

About $24 to $71.50 per linear ft for materials and labor, plus $35 to $140 for the permit if one is needed. The US range is $25 to $75.

+Is aluminum fence cheaper in Muskegon or Grand Rapids?

Grand Rapids is 45 miles away. The midpoint for 150 linear ft there is $7,200, which is 1% less than Muskegon ($7,250). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Muskegon?

About 36% at the midpoint, or $2,600 out of $7,250. Materials are 63% and permits 1%. Nationally, labor is 35%.

+What would 150 ft (150 linear ft) cost in Muskegon?

$3,600 to $10,900. Pick a different size in the estimator above to get your own number.

+Does aluminum fence need a permit in Muskegon?

Often, but rules are set by your city or county building office, so call before you hire. Budget $35 to $140 for fees in the Muskegon area (our national range of $40 to $150 scaled by the local price level).

+Is Muskegon expensive for aluminum fence compared with the rest of Michigan?

Muskegon is 3% below the Michigan statewide estimate ($7,500 at the midpoint). We cover 10 metros in Michigan; see the state page to compare them.

+What do carpenters earn in Muskegon?

The BLS median is $23.47 an hour in the Muskegon area, compared with $29.12 nationally. The 25th to 75th percentile range is $21.00 to $29.72.

+What do basic and premium aluminum fence work cost in Muskegon?

For 150 linear ft, basic work runs $3,600 to $6,500 and premium work $7,950 to $10,900. Basic means: standard picket or ornamental, 4 ft. Premium means: tall privacy slat or custom ornamental.

+When is the best time to install an aluminum fence in Muskegon?

Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are April through November. July and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.

+What does "add one gate" add in Muskegon?

$190 to $860, from a national range scaled by the local wage and goods indexes.

Aluminum fence near Muskegon

Aluminum fence: all pricesAluminum fence in MichiganAll projects in MuskegonMichigan cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = installed range minus HomeGuide's $10-$25/ft labor range.