Aluminum fence cost in Grand Rapids, MI
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $3,600 – $10,800
- Per linear ft
- $23.50 – $71
- before permit
- Versus US midpoint
- −5%
- US $7,600
- Rank of 300 metros
- #175
- 1 = most expensive
Grand Rapids homeowners pay roughly $3,600 to $10,800 to install an aluminum fence at 150 linear ft, or $23.50 to $71 per linear ft (permit not included). Against the US midpoint, Grand Rapids is 5% lower. Building materials run about 6% below the US average here (BEA goods price index 93.7).
Estimate your aluminum fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Grand Rapids, MI, standard level
$5,750 to $8,650
About $38 to $57 per linear ft before permits. Labor is about 35% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $3,600 | $5,550 |
| Labor | $2,100 | $3,000 |
| Permits and fees | $70 | $110 |
| Total | $5,750 | $8,650 |
Cost breakdown for 150 linear ft in Grand Rapids, MI
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $2,100 | $4,550 | $7,050 | 63% |
| Labor | $1,450 | $2,550 | $3,650 | 35% |
| Permits and fees | $40 | $90 | $140 | 1% |
| Total | $3,600 | $7,200 | $10,800 | 100% |
What is behind the Grand Rapids number
Labor is 35% of the midpoint bill here, against 35% nationally. The mix of trades behind this job is carpenters (40%), construction laborers (40%), sheet metal workers (20%). We weight each trade's local median wage by that share and compare it with the national median. In Grand Rapids the blended ratio comes out at 0.97.
On the materials line, the BEA goods price index for the Grand Rapids metro is 93.7 (US = 100). The midpoint materials bill for 150 linear ft comes to $4,550, compared with $4,900 at national prices. Permit and inspection fees are scaled by the broader index (95.5) and land at $40 to $140.
Local wages behind the labor line
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Grand Rapids is 0.97 times the national level.
For carpenters (47-2031, weighted 40%) the local median is $28.36 an hour, which is in line with the national $29.12. The middle half of them earn between $22.88 and $31.12 an hour. BLS counts 2,840 of them working in the area, 47.5 for every 10,000 jobs (US: 43.1), so the local bench is about average.
Construction laborers (47-2061), 40% of the weighting: a median of $22.97 an hour, in line with the US median of $22.66. The middle half of them earn between $20.19 and $28.78 an hour. About 3,990 work in the metro. That is 66.7 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.
For sheet metal workers (47-2211, weighted 20%) the local median is $25.62 an hour, which is 14% below the national $29.71. The middle half of them earn between $21.94 and $38.13 an hour. BLS counts 630 of them working in the area, 10.5 for every 10,000 jobs (US: 7.7), so the local bench is deeper than average.
Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($31.12 an hour) instead of the median, the labor line grows by about $100. At the 25th percentile ($22.88) it shrinks by about $200. The total moves by 1.4% or 2.7%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 598,260 jobs in the Grand Rapids-Wyoming-Kentwood area. That makes it the 48th largest of the 300 metros we cover, with 0.38% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 40% | $22.88 | $28.36 | $31.12 | $29.12 | 0.97 | metro |
| Construction laborers (47-2061) | 40% | $20.19 | $22.97 | $28.78 | $22.66 | 1.01 | metro |
| Sheet metal workers (47-2211) | 20% | $21.94 | $25.62 | $38.13 | $29.71 | 0.86 | metro |
| Blended | 100% | 0.97 | |||||
Optional extras in Grand Rapids
Extras are quoted nationally and then scaled to Grand Rapids by the average of the local wage index (0.97) and goods index (0.94), a factor of 0.95. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $190 – $860 |
Aluminum fence: what moves the price in Grand Rapids
Style
Aluminum picket runs $25-$50 per linear foot installed, ornamental fence $40-$75, and privacy designs $75-$130 (HomeGuide).
Soil and slope
Steep slopes and rocky clay can add $15-$20+ per linear foot in labor.
Pool codes
Many codes require a pool barrier with gaps under 4 inches, which influences the style you can buy.
How Grand Rapids compares
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 150 linear ft range from $7,200 to $7,650 across Grand Rapids and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Grand Rapids, MIthis page | $3,600 – $10,800 | $7,200 | |
| Muskegon, MI45 miles | $3,600 – $10,900 | $7,250 | +1% |
| Kalamazoo, MI50 miles | $3,800 – $11,300 | $7,550 | +5% |
| Lansing, MI60 miles | $3,850 – $11,500 | $7,650 | +6% |
| South Bend, IN85 miles | $3,800 – $11,300 | $7,550 | +5% |
| Saginaw, MI85 miles | $3,700 – $11,000 | $7,350 | +2% |
| Michigan (statewide) | $3,750 – $11,200 | $7,500 | +4% |
| United States | $3,800 – $11,400 | $7,600 | +6% |
Across 300 US metros, Grand Rapids comes in at #175 from the top. The priciest is Honolulu, HI at $9,700; the cheapest is Brownsville, TX at $6,500 (midpoints, 150 linear ft). Statewide, Grand Rapids is 4% below the Michigan figure.
Other Michigan metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Detroit, MI | 1,904,530 jobs | $4,000 – $11,900 | $7,950 | +11% |
| Ann Arbor, MI | 219,730 jobs | $3,800 – $11,300 | $7,550 | +5% |
| Lansing, MI | 217,180 jobs | $3,850 – $11,500 | $7,650 | +6% |
| Flint, MI | 135,040 jobs | $3,900 – $11,500 | $7,700 | +7% |
| Kalamazoo, MI | 121,790 jobs | $3,800 – $11,300 | $7,550 | +5% |
| Saginaw, MI | 80,000 jobs | $3,700 – $11,000 | $7,350 | +2% |
Cities with a workforce like Grand Rapids's
Big cities and small ones price differently, so here is Grand Rapids against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Hartford, CT | 599,770 jobs | $3,950 – $11,800 | $7,900 | +9% |
| Buffalo, NY | 534,550 jobs | $3,900 – $11,700 | $7,800 | +8% |
| Memphis, TN | 611,670 jobs | $3,550 – $10,800 | $7,150 | level |
| Birmingham, AL | 520,290 jobs | $3,450 – $10,400 | $6,900 | −4% |
Related projects, priced for Grand Rapids
Because every project leans on different trades, Grand Rapids's wage level does not move all prices equally. Against the US midpoint, inground pool runs level and vinyl fence −5%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Vinyl fence | 150 linear ft | $4,300 – $8,700 | −5% |
| Wood fence | 150 linear ft | $2,950 – $7,350 | −4% |
| Chain-link fence | 150 linear ft | $1,500 – $6,000 | −3% |
| Inground pool | 450 sq ft | $36,200 – $113,000 | level |
When to schedule aluminum fence in Grand Rapids
We use NOAA's 1991-2020 climate normals for E Grand Rapids (5 miles from the city center). These are 30-year monthly averages, not forecasts.
April through November is the stretch where exterior installation runs into the fewest weather problems in Grand Rapids (8 of 12 months). January, February, March and December have an average daytime high under 45°F.
In January, February, March and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Grand Rapids gets about 40 inches of precipitation in a normal year, including roughly 75 inches of snow. The wettest months are April, May and June (4.4 inches in May). Inside the workable window, August and November are the driest, at 3.0 and 3.3 inches. The station averages about 9 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 31 | 17 | 2.7 | Cold |
| Feb | 34 | 18 | 2.1 | Cold |
| Mar | 44 | 24 | 2.6 | Cold |
| Apr | 57 | 35 | 4.1 | Workable |
| May | 69 | 46 | 4.4 | Workable |
| Jun | 79 | 56 | 4.0 | Workable |
| Jul | 82 | 60 | 3.3 | Workable |
| Aug | 81 | 58 | 3.0 | Workable |
| Sep | 74 | 51 | 3.5 | Workable |
| Oct | 61 | 40 | 3.7 | Workable |
| Nov | 47 | 31 | 3.3 | Workable |
| Dec | 36 | 23 | 2.8 | Cold |
Pick a size, pick a tier: aluminum fence pricing in Grand Rapids
Three bands are cut from the same cited range and localized for Grand Rapids wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.
Basic
$3,600 to $6,500
Standard picket or ornamental, 4 ft
Standard
$5,750 to $8,650
Ornamental pool-code fence, 4-5 ft
Premium
$7,900 to $10,800
Tall privacy slat or custom ornamental
| Size | Basic | Standard | Premium |
|---|---|---|---|
| pool fence (100 linear ft) | $2,400 – $4,350 | $3,850 – $5,800 | $5,300 – $7,250 |
| 150 ft (150 linear ft) | $3,600 – $6,500 | $5,750 – $8,650 | $7,900 – $10,800 |
| 200 ft (200 linear ft) | $4,800 – $8,600 | $7,650 – $11,500 | $10,500 – $14,400 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,750 to $8,650 for Grand Rapids, MI is attached.
A detailed PDF report of this estimate, $9
Multi-page report for Grand Rapids, MI: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Aluminum fence in Grand Rapids: your questions
+How much does it cost to install an aluminum fence in Grand Rapids?
For 150 linear ft, expect $3,600 to $10,800 in the Grand Rapids area. A standard-spec job lands at $5,750 to $8,650. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for aluminum fence in Grand Rapids?
About $23.50 to $71 per linear ft for materials and labor, plus $40 to $140 for the permit if one is needed. The US range is $25 to $75.
+Is aluminum fence cheaper in Grand Rapids or Muskegon?
Muskegon is 45 miles away. The midpoint for 150 linear ft there is $7,250, which is 1% more than Grand Rapids ($7,200). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Grand Rapids?
About 35% at the midpoint, or $2,550 out of $7,200. Materials are 63% and permits 1%. Nationally, labor is 35%.
+What would 150 ft (150 linear ft) cost in Grand Rapids?
$3,600 to $10,800. Pick a different size in the estimator above to get your own number.
+Does aluminum fence need a permit in Grand Rapids?
Often, but rules are set by your city or county building office, so call before you hire. Budget $40 to $140 for fees in the Grand Rapids area (our national range of $40 to $150 scaled by the local price level).
+Is Grand Rapids expensive for aluminum fence compared with the rest of Michigan?
Grand Rapids is 4% below the Michigan statewide estimate ($7,500 at the midpoint). We cover 10 metros in Michigan; see the state page to compare them.
+What do carpenters earn in Grand Rapids?
The BLS median is $28.36 an hour in the Grand Rapids area, compared with $29.12 nationally. The 25th to 75th percentile range is $22.88 to $31.12.
+What do basic and premium aluminum fence work cost in Grand Rapids?
For 150 linear ft, basic work runs $3,600 to $6,500 and premium work $7,900 to $10,800. Basic means: standard picket or ornamental, 4 ft. Premium means: tall privacy slat or custom ornamental.
+When is the best time to install an aluminum fence in Grand Rapids?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are April through November. August and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Grand Rapids?
$190 to $860, from a national range scaled by the local wage and goods indexes.
Aluminum fence near Grand Rapids
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does an Aluminum Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus HomeGuide's $10-$25/ft labor range.