Aluminum fence cost in Salinas, CA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $4,250 – $12,700
- Per linear ft
- $28 – $83.50
- before permit
- Versus US midpoint
- +12%
- US $7,600
- Rank of 300 metros
- #20
- 1 = most expensive
Local price for an aluminum fence in the Salinas area: $4,250 to $12,700 for 150 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 12% higher than the US figure. Carpenters earn a median of $32.47 an hour in the Salinas area, 12% above the US median of $29.12.
Estimate your aluminum fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Salinas, CA, standard level
$6,800 to $10,200
About $45 to $67 per linear ft before permits. Labor is about 38% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,000 | $6,250 |
| Labor | $2,700 | $3,800 |
| Permits and fees | $80 | $130 |
| Total | $6,800 | $10,200 |
Cost breakdown for 150 linear ft in Salinas, CA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $2,350 | $5,150 | $7,900 | 60% |
| Labor | $1,850 | $3,250 | $4,650 | 38% |
| Permits and fees | $45 | $100 | $160 | 1% |
| Total | $4,250 | $8,500 | $12,700 | 100% |
Why Salinas prices look the way they do
We price the labor side from BLS wage data for 3 trades: carpenters at 40%, construction laborers at 40%, sheet metal workers at 20%. Weighted together, Salinas wages are 1.24 times the national level. Labor makes up about 38% of the midpoint estimate (35% at national prices).
Materials are scaled with BEA's regional price parity for goods. Salinas is at 105.2 against 100 for the US, so a materials line of $4,900 nationally becomes $5,150 here (midpoint, 150 linear ft). Permits follow the all-items index of 109.0: $45 to $160.
Pick a size, pick a tier: aluminum fence pricing in Salinas
The cited range is split into basic, standard and premium bands, then scaled to Salinas. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from pool fence (100 linear ft) to 200 ft (200 linear ft).
Basic
$4,250 to $7,650
Standard picket or ornamental, 4 ft
Standard
$6,800 to $10,200
Ornamental pool-code fence, 4-5 ft
Premium
$9,350 to $12,700
Tall privacy slat or custom ornamental
| Size | Basic | Standard | Premium |
|---|---|---|---|
| pool fence (100 linear ft) | $2,850 – $5,100 | $4,550 – $6,800 | $6,250 – $8,500 |
| 150 ft (150 linear ft) | $4,250 – $7,650 | $6,800 – $10,200 | $9,350 – $12,700 |
| 200 ft (200 linear ft) | $5,700 – $10,200 | $9,050 – $13,500 | $12,400 – $16,900 |
The best months for aluminum fence in Salinas
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Salinas Municipal Ap (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
Weather is not a serious constraint for exterior installation in Salinas: no month in the averages is cold enough (an average daytime high under 45°F) or hot enough (an average daytime high of 90°F or more) to rule it out, so the workable window is all year.
Salinas gets about 13 inches of precipitation in a normal year. The wettest months are January, February and December (2.6 inches in January). The station averages about 6 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 62 | 42 | 2.6 | Workable |
| Feb | 63 | 43 | 2.4 | Workable |
| Mar | 66 | 45 | 2.1 | Workable |
| Apr | 67 | 46 | 0.9 | Workable |
| May | 68 | 50 | 0.4 | Workable |
| Jun | 70 | 53 | 0.1 | Workable |
| Jul | 71 | 55 | 0.0 | Workable |
| Aug | 72 | 56 | 0.0 | Workable |
| Sep | 74 | 54 | 0.1 | Workable |
| Oct | 74 | 50 | 0.6 | Workable |
| Nov | 68 | 44 | 1.3 | Workable |
| Dec | 62 | 41 | 2.1 | Workable |
Aluminum fence: what moves the price in Salinas
Permit
A fence permit runs $40-$150.
Style
Aluminum picket runs $25-$50 per linear foot installed, ornamental fence $40-$75, and privacy designs $75-$130 (HomeGuide).
Soil and slope
Steep slopes and rocky clay can add $15-$20+ per linear foot in labor.
Who does the work: Salinas trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Salinas the blend is 1.24.
Carpenters (47-2031), 40% of the weighting: a median of $32.47 an hour, 12% above the US median of $29.12. The middle half of them earn between $24.94 and $39.57 an hour. About 1,210 work in the metro. That is 64.9 per 10,000 jobs, compared with 43.1 nationally, which suggests plenty of local crews to bid.
For construction laborers (47-2061, weighted 40%) the local median is $29.65 an hour, which is 31% above the national $22.66. The middle half of them earn between $24.31 and $36.63 an hour. BLS counts 950 of them working in the area, 51.0 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.
Sheet metal workers (47-2211), 20% of the weighting: a median of $40.13 an hour, 35% above the US median of $29.71. The middle half of them earn between $34.30 and $63.21 an hour. About 60 work in the metro. That is 3.2 per 10,000 jobs, compared with 7.7 nationally, so expect fewer local crews to bid.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $260 to the midpoint estimate; the 25th percentile takes off about $270. That is a swing of roughly 3.2% to 3.0% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Salinas has 186,430 jobs in total (BLS, May 2025), ranking 123rd by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 40% | $24.94 | $32.47 | $39.57 | $29.12 | 1.12 | metro |
| Construction laborers (47-2061) | 40% | $24.31 | $29.65 | $36.63 | $22.66 | 1.31 | metro |
| Sheet metal workers (47-2211) | 20% | $34.30 | $40.13 | $63.21 | $29.71 | 1.35 | metro |
| Blended | 100% | 1.24 | |||||
What nearby projects cost in Salinas
Jobs that often go together with aluminum fence are priced below at their usual sizes, using the same Salinas wage and price inputs. Compared with national midpoints, chain-link fence comes out highest (+16%) and vinyl fence lowest (+9%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Vinyl fence | 150 linear ft | $4,900 – $10,000 | +9% |
| Wood fence | 150 linear ft | $3,400 – $8,450 | +11% |
| Chain-link fence | 150 linear ft | $1,750 – $7,200 | +16% |
| Inground pool | 450 sq ft | $41,500 – $129,500 | +15% |
Optional extras in Salinas
Add-ons start from national price ranges and are scaled by 1.15 for Salinas, which is the average of the area's wage index (1.24) and goods price index (1.05). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $230 – $1,050 |
Is Salinas cheap or dear? The local comparison
Same job, same size (150 linear ft), priced for the nearest metros. San Jose is the priciest of the group at $9,100. Merced is the cheapest at $8,400.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Salinas, CAthis page | $4,250 – $12,700 | $8,500 | |
| San Jose, CA45 miles | $4,600 – $13,500 | $9,100 | +7% |
| Santa Cruz, CA65 miles | $4,300 – $12,800 | $8,550 | +1% |
| Merced, CA75 miles | $4,200 – $12,500 | $8,400 | −1% |
| San Luis Obispo, CA75 miles | $4,300 – $12,800 | $8,550 | +1% |
| Modesto, CA95 miles | $4,250 – $12,700 | $8,450 | level |
| California (statewide) | $4,300 – $12,900 | $8,600 | +1% |
| United States | $3,800 – $11,400 | $7,600 | −10% |
Out of the 300 metros we cover, Salinas ranks #20 for the cost of this job (#1 is the most expensive). Statewide, Salinas is 1% below the California figure.
Elsewhere in California
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Los Angeles, CA | 6,271,560 jobs | $4,300 – $12,800 | $8,550 | +1% |
| San Francisco, CA | 2,373,920 jobs | $4,800 – $14,100 | $9,450 | +11% |
| Riverside, CA | 1,716,760 jobs | $4,100 – $12,300 | $8,200 | −4% |
| San Diego, CA | 1,538,060 jobs | $4,300 – $12,900 | $8,600 | +1% |
| San Jose, CA | 1,134,970 jobs | $4,600 – $13,500 | $9,100 | +7% |
| Sacramento, CA | 1,080,590 jobs | $4,300 – $12,700 | $8,500 | level |
Metros of a similar size
Big cities and small ones price differently, so here is Salinas against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Salem, OR | 188,620 jobs | $4,000 – $12,000 | $8,000 | −6% |
| Tallahassee, FL | 186,160 jobs | $3,400 – $10,300 | $6,850 | −19% |
| Pensacola, FL | 190,480 jobs | $3,450 – $10,500 | $7,000 | −18% |
| York, PA | 183,590 jobs | $3,850 – $11,500 | $7,650 | −10% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $6,800 to $10,200 for Salinas, CA is attached.
Detailed aluminum fence report for Salinas, CA, $9
The report lays out the aluminum fence numbers for Salinas, CA line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Aluminum fence in Salinas: your questions
+How much does it cost to install an aluminum fence in Salinas?
For 150 linear ft, expect $4,250 to $12,700 in the Salinas area. A standard-spec job lands at $6,800 to $10,200. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for aluminum fence in Salinas?
About $28 to $83.50 per linear ft for materials and labor, plus $45 to $160 for the permit if one is needed. The US range is $25 to $75.
+Is aluminum fence cheaper in Salinas or San Jose?
San Jose is 45 miles away. The midpoint for 150 linear ft there is $9,100, which is 7% more than Salinas ($8,500). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Salinas?
About 38% at the midpoint, or $3,250 out of $8,500. Materials are 60% and permits 1%. Nationally, labor is 35%.
+What would 150 ft (150 linear ft) cost in Salinas?
$4,250 to $12,700. Pick a different size in the estimator above to get your own number.
+Does aluminum fence need a permit in Salinas?
Often, but rules are set by your city or county building office, so call before you hire. Budget $45 to $160 for fees in the Salinas area (our national range of $40 to $150 scaled by the local price level).
+Is Salinas expensive for aluminum fence compared with the rest of California?
Salinas is 1% below the California statewide estimate ($8,600 at the midpoint). We cover 23 metros in California; see the state page to compare them.
+What do carpenters earn in Salinas?
The BLS median is $32.47 an hour in the Salinas area, compared with $29.12 nationally. The 25th to 75th percentile range is $24.94 to $39.57.
+What do basic and premium aluminum fence work cost in Salinas?
For 150 linear ft, basic work runs $4,250 to $7,650 and premium work $9,350 to $12,700. Basic means: standard picket or ornamental, 4 ft. Premium means: tall privacy slat or custom ornamental.
+Is there a bad season to install an aluminum fence in Salinas?
Not from a temperature point of view. NOAA's 1991-2020 normals show no month with a freezing-level overnight low or a 90°F-plus average high, so timing is mostly about contractor availability and rain.
+What does "add one gate" add in Salinas?
$230 to $1,050, from a national range scaled by the local wage and goods indexes.
Aluminum fence near Salinas
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does an Aluminum Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus HomeGuide's $10-$25/ft labor range.