Skip to content
CostLocal

Wood fence cost in Flagstaff, AZ

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (150 linear ft)
$2,900 – $7,350
Per linear ft
$19 – $48
before permit
Versus US midpoint
−4%
US $5,350
Rank of 300 metros
#152
1 = most expensive

If you want to install a wood fence in Flagstaff, plan on $2,900 to $7,350 for 150 linear ft, all in. Per linear ft, that is $19 to $48 for materials and labor, with the permit on top. The local midpoint runs 4% lower than the national one. Carpenters earn a median of $26.91 an hour in the Flagstaff area, 8% below the US median of $29.12.

Estimate your wood fence cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

6-ft cedar or treated privacy fence

Add-ons

Estimated cost for 150 linear ft in Flagstaff, AZ, standard level

$4,250 to $6,000

About $27.50 to $39 per linear ft before permits. Labor is about 42% of the bill.

Cost breakdown
PartLowHigh
Materials$2,300$3,450
Labor$1,850$2,400
Permits and fees$75$120
Total$4,250$6,000
Save and get a PDF report

Cost breakdown for 150 linear ft in Flagstaff, AZ

Part of the jobLowMidpointHighShare
Materials$1,450$2,900$4,35056%
Labor$1,400$2,150$2,85042%
Permits and fees$40$95$1502%
Total$2,900$5,100$7,350100%

What is behind the Flagstaff number

Labor is 42% of the midpoint bill here, against 42% nationally. The mix of trades behind this job is carpenters (60%), construction laborers (40%). We weight each trade's local median wage by that share and compare it with the national median. In Flagstaff the blended ratio comes out at 0.95.

On the materials line, the BEA goods price index for the Flagstaff metro is 96.2 (US = 100). The midpoint materials bill for 150 linear ft comes to $2,900, compared with $3,000 at national prices. Permit and inspection fees are scaled by the broader index (100.3) and land at $40 to $150.

Climate in Flagstaff: timing your wood fence job

We use NOAA's 1991-2020 climate normals for Flagstaff Pulliam Ap (5 miles from the city center). These are 30-year monthly averages, not forecasts.

February through November is the stretch where exterior installation runs into the fewest weather problems in Flagstaff (10 of 12 months). January and December have an average daytime high under 45°F.

In January and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.

Flagstaff gets about 21 inches of precipitation in a normal year, including roughly 90 inches of snow. The wettest months are February, July and August (3.0 inches in August). Inside the workable window, May and June are the driest, at 0.8 and 0.3 inches. The station averages about 3 days a year at 90°F or above.

Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.

Monthly normals, Flagstaff Pulliam Ap (NOAA, 1991-2020)
MonthAvg high °FAvg low °FPrecip (in)For this job
Jan43182.0Cold
Feb46202.2Workable
Mar52241.9Workable
Apr59280.9Workable
May68350.8Workable
Jun79430.3Workable
Jul82512.6Workable
Aug79513.0Workable
Sep74431.8Workable
Oct64321.5Workable
Nov52231.6Workable
Dec43171.9Cold

How Flagstaff compares

Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 150 linear ft range from $4,850 to $5,300 across Flagstaff and its five closest metros.

Comparison with nearby areas
AreaRangeMidpointvs. here
Flagstaff, AZthis page$2,900 – $7,350$5,100
Prescott Valley, AZ95 miles$2,900 – $7,350$5,100level
Lake Havasu City, AZ110 miles$2,750 – $6,950$4,850−5%
St. George, UT135 miles$2,750 – $7,050$4,900−4%
Las Vegas, NV185 miles$3,050 – $7,550$5,300+3%
Phoenix, AZ185 miles$2,950 – $7,400$5,200+1%
Arizona (statewide)$2,950 – $7,350$5,150+1%
United States$3,050 – $7,650$5,350+4%

Across 300 US metros, Flagstaff comes in at #152 from the top. The priciest is Honolulu, HI at $7,050; the cheapest is Brownsville, TX at $4,350 (midpoints, 150 linear ft). Statewide, Flagstaff is 1% below the Arizona figure.

Other Arizona metros

Arizona metros compared with Flagstaff
MetroSizeRangeMidpointvs. here
Phoenix, AZ2,375,760 jobs$2,950 – $7,400$5,200+1%
Tucson, AZ389,630 jobs$2,800 – $7,100$4,950−4%
Prescott Valley, AZ72,300 jobs$2,900 – $7,350$5,100level
Yuma, AZ68,880 jobs$2,750 – $7,000$4,850−5%
Lake Havasu City, AZ56,490 jobs$2,750 – $6,950$4,850−5%

Cities with a workforce like Flagstaff's

Big cities and small ones price differently, so here is Flagstaff against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Logan, UT66,800 jobs$2,800 – $7,150$4,950−3%
Amherst, MA65,670 jobs$3,250 – $8,000$5,600+10%
Missoula, MT67,070 jobs$2,950 – $7,450$5,200+2%
Harrisonburg, VA65,460 jobs$2,800 – $7,100$4,950−4%

Flagstaff labor market for wood fence

Wages are the part of this estimate that changes most from town to town. 2 trades carry the job here, and each is compared with its US median. The weighted result for Flagstaff is 0.95 times the national level.

For carpenters (47-2031, weighted 60%) the local median is $26.91 an hour, which is 8% below the national $29.12. The middle half of them earn between $22.77 and $30.14 an hour. BLS counts 280 of them working in the area, 42.0 for every 10,000 jobs (US: 43.1), so the local bench is about average.

Construction laborers (47-2061), 40% of the weighting: a median of $22.32 an hour, in line with the US median of $22.66. The middle half of them earn between $18.61 and $24.26 an hour. About 470 work in the metro. That is 70.6 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.

Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($30.14 an hour) instead of the median, the labor line grows by about $150. At the 25th percentile ($22.77) it shrinks by about $190. The total moves by 2.9% or 3.8%, so wages alone rarely explain a quote that is far outside our range.

For context on the local economy, BLS counts 66,610 jobs in the Flagstaff area. That makes it the 272nd largest of the 300 metros we cover, with 0.04% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Carpenters (47-2031)60%$22.77$26.91$30.14$29.120.92metro
Construction laborers (47-2061)40%$18.61$22.32$24.26$22.660.98metro
Blended100%0.95

What nearby projects cost in Flagstaff

Because every project leans on different trades, Flagstaff's wage level does not move all prices equally. Against the US midpoint, chain-link fence runs −4% and aluminum fence −5%.

Related projects with local prices
ProjectSizeRangevs. US
Vinyl fence150 linear ft$4,350 – $8,800−4%
Chain-link fence150 linear ft$1,500 – $5,900−4%
Aluminum fence150 linear ft$3,600 – $10,800−5%
Wood deck300 sq ft$7,200 – $14,400−5%

Extras that change the Flagstaff total

Extras are quoted nationally and then scaled to Flagstaff by the average of the local wage index (0.95) and goods index (0.96), a factor of 0.96. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.

Add-on prices
Add-onLocal range
Add one gate (flat)$140 – $760

Flagstaff: what basic, standard and premium work costs

Three bands are cut from the same cited range and localized for Flagstaff wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.

Basic

$2,900 to $4,650

Pine pickets or split rail, 4 ft

Standard

$4,250 to $6,000

6-ft cedar or treated privacy fence

Premium

$5,550 to $7,350

Premium hardwood or 8-ft privacy fence

Cost by size and quality level
SizeBasicStandardPremium
backyard (100 linear ft)$1,950 – $3,150$2,850 – $4,050$3,750 – $4,950
150 ft (150 linear ft)$2,900 – $4,650$4,250 – $6,000$5,550 – $7,350
200 ft (200 linear ft)$3,850 – $6,200$5,600 – $7,950$7,400 – $9,700
full lot (300 linear ft)$5,750 – $9,250$8,400 – $11,900$11,000 – $14,500

Wood fence: what moves the price in Flagstaff

  • Height and permits

    Fences over about 6 ft often need a permit and a setback check. Permits run $40-$150.

  • Slope and soil

    Hills, rock, and tree roots slow post digging.

  • Composite

    A composite wood-look privacy fence is $55-$85 per linear foot installed (HomeGuide).

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $4,250 to $6,000 for Flagstaff, AZ is attached.

Detailed wood fence report for Flagstaff, AZ, $9

Multi-page report for Flagstaff, AZ: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Wood fence in Flagstaff: your questions

+How much does it cost to install a wood fence in Flagstaff?

For 150 linear ft, expect $2,900 to $7,350 in the Flagstaff area. A standard-spec job lands at $4,250 to $6,000. Small jobs usually cost more per linear ft and large ones less.

+What is the price per linear ft for wood fence in Flagstaff?

About $19 to $48 per linear ft for materials and labor, plus $40 to $150 for the permit if one is needed. The US range is $20 to $50.

+Is wood fence cheaper in Flagstaff or Prescott Valley?

Prescott Valley is 95 miles away. The midpoint for 150 linear ft there is $5,100, which is 0% more than Flagstaff ($5,100). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Flagstaff?

About 42% at the midpoint, or $2,150 out of $5,100. Materials are 56% and permits 2%. Nationally, labor is 42%.

+What would 200 ft (200 linear ft) cost in Flagstaff?

$3,850 to $9,700. Pick a different size in the estimator above to get your own number.

+Does wood fence need a permit in Flagstaff?

Often, but rules are set by your city or county building office, so call before you hire. Budget $40 to $150 for fees in the Flagstaff area (our national range of $40 to $150 scaled by the local price level).

+Is Flagstaff expensive for wood fence compared with the rest of Arizona?

Flagstaff is 1% below the Arizona statewide estimate ($5,150 at the midpoint). We cover 6 metros in Arizona; see the state page to compare them.

+What do carpenters earn in Flagstaff?

The BLS median is $26.91 an hour in the Flagstaff area, compared with $29.12 nationally. The 25th to 75th percentile range is $22.77 to $30.14.

+What do basic and premium wood fence work cost in Flagstaff?

For 150 linear ft, basic work runs $2,900 to $4,650 and premium work $5,550 to $7,350. Basic means: pine pickets or split rail, 4 ft. Premium means: premium hardwood or 8-ft privacy fence.

+When is the best time to install a wood fence in Flagstaff?

Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are February through November. May and June are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.

+What does "add one gate" add in Flagstaff?

$140 to $760, from a national range scaled by the local wage and goods indexes.

Wood fence near Flagstaff

Wood fence: all pricesWood fence in ArizonaAll projects in FlagstaffArizona cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.