Skip to content
CostLocal

Wood deck cost in Bridgeport, CT

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (300 sq ft)
$7,700 – $15,500
Per sq ft
$25.50 – $51
before permit
Versus US midpoint
+2%
US $11,400
Rank of 300 metros
#64
1 = most expensive

Bridgeport homeowners pay roughly $7,700 to $15,500 to build a wood deck at 300 sq ft, or $25.50 to $51 per sq ft (permit not included). Against the US midpoint, Bridgeport is almost level. Carpenters earn a median of $30.39 an hour in the Bridgeport area, 4% above the US median of $29.12.

Estimate your wood deck cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Cedar or upgraded pine, stairs and a railing

Add-ons

Estimated cost for 300 sq ft in Bridgeport, CT, standard level

$10,100 to $13,200

About $33 to $43.50 per sq ft before permits. Labor is about 46% of the bill.

Cost breakdown
PartLowHigh
Materials$5,300$6,950
Labor$4,650$6,100
Permits and fees$85$130
Total$10,100$13,200
Save and get a PDF report

Cost breakdown for 300 sq ft in Bridgeport, CT

Part of the jobLowMidpointHighShare
Materials$4,100$6,150$8,20053%
Labor$3,600$5,350$7,15046%
Permits and fees$55$110$1601%
Total$7,700$11,600$15,500100%

Where the Bridgeport price comes from

We price the labor side from BLS wage data for 2 trades: carpenters at 80%, construction laborers at 20%. Weighted together, Bridgeport wages are 1.09 times the national level. Labor makes up about 46% of the midpoint estimate (44% at national prices).

On the materials line, the BEA goods price index for the Bridgeport metro is 97.3 (US = 100). The midpoint materials bill for 300 sq ft comes to $6,150, compared with $6,300 at national prices. Permit and inspection fees are scaled by the broader index (106.9) and land at $55 to $160.

When to schedule wood deck in Bridgeport

We use NOAA's 1991-2020 climate normals for Bridgeport Sikorsky Mem Ap (5 miles from the city center). These are 30-year monthly averages, not forecasts.

March through November is the stretch where exterior installation runs into the fewest weather problems in Bridgeport (9 of 12 months). January, February and December have an average daytime high under 45°F.

In January, February and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.

Bridgeport gets about 44 inches of precipitation in a normal year, including roughly 34 inches of snow. The wettest months are March, April and August (4.2 inches in April). Inside the workable window, July and November are the driest, at 3.3 and 3.1 inches. The station averages about 9 days a year at 90°F or above.

Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.

Monthly normals, Bridgeport Sikorsky Mem Ap (NOAA, 1991-2020)
MonthAvg high °FAvg low °FPrecip (in)For this job
Jan38243.2Cold
Feb41263.1Cold
Mar47324.1Workable
Apr58424.2Workable
May68523.6Workable
Jun78623.8Workable
Jul83683.3Workable
Aug82674.0Workable
Sep75604.0Workable
Oct64483.8Workable
Nov54383.1Workable
Dec44304.0Cold

Is Bridgeport cheap or dear? The local comparison

Same job, same size (300 sq ft), priced for the nearest metros. New York is the priciest of the group at $13,200. Waterbury is the cheapest at $11,500.

Comparison with nearby areas
AreaRangeMidpointvs. here
Bridgeport, CTthis page$7,700 – $15,500$11,600
Waterbury, CT25 miles$7,650 – $15,300$11,500−1%
New Haven, CT30 miles$7,850 – $15,800$11,800+2%
Poughkeepsie, NY40 miles$8,200 – $16,500$12,300+6%
New York, NY40 miles$8,800 – $17,600$13,200+14%
Hartford, CT55 miles$7,750 – $15,600$11,700level
Connecticut (statewide)$7,750 – $15,500$11,600level
United States$7,550 – $15,200$11,400−2%

Across 300 US metros, Bridgeport comes in at #64 from the top. The priciest is Honolulu, HI at $14,900; the cheapest is Brownsville, TX at $9,050 (midpoints, 300 sq ft). Statewide, Bridgeport is 0% below the Connecticut figure.

Other Connecticut metros

Connecticut metros compared with Bridgeport
MetroSizeRangeMidpointvs. here
Hartford, CT599,770 jobs$7,750 – $15,600$11,700level
New Haven, CT281,410 jobs$7,850 – $15,800$11,800+2%
Waterbury, CT160,710 jobs$7,650 – $15,300$11,500−1%
Norwich, CT126,450 jobs$7,700 – $15,400$11,500−1%

Cities with a workforce like Bridgeport's

Big cities and small ones price differently, so here is Bridgeport against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Albuquerque, NM404,700 jobs$7,250 – $14,600$10,900−6%
Des Moines, IA404,130 jobs$7,350 – $14,800$11,100−5%
Madison, WI408,070 jobs$7,550 – $15,200$11,400−2%
Columbia, SC394,200 jobs$6,800 – $13,600$10,200−12%

Local wages behind the labor line

Wages are the part of this estimate that changes most from town to town. 2 trades carry the job here, and each is compared with its US median. The weighted result for Bridgeport is 1.09 times the national level.

For carpenters (47-2031, weighted 80%) the local median is $30.39 an hour, which is 4% above the national $29.12. The middle half of them earn between $27.19 and $37.89 an hour. BLS counts 1,100 of them working in the area, 27.2 for every 10,000 jobs (US: 43.1), so the local bench is thinner than average.

Construction laborers (47-2061), 20% of the weighting: a median of $28.38 an hour, 25% above the US median of $22.66. The middle half of them earn between $23.18 and $35.00 an hour. About 1,930 work in the metro. That is 47.8 per 10,000 jobs, compared with 70.5 nationally, so expect fewer local crews to bid.

Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($37.89 an hour) instead of the median, the labor line grows by about $1,000. At the 25th percentile ($27.19) it shrinks by about $440. The total moves by 8.8% or 3.7%, so wages alone rarely explain a quote that is far outside our range.

For context on the local economy, BLS counts 404,180 jobs in the Bridgeport-Stamford-Danbury area. That makes it the 63rd largest of the 300 metros we cover, with 0.26% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Carpenters (47-2031)80%$27.19$30.39$37.89$29.121.04metro
Construction laborers (47-2061)20%$23.18$28.38$35.00$22.661.25metro
Blended100%1.09

Extras that change the Bridgeport total

Extras are quoted nationally and then scaled to Bridgeport by the average of the local wage index (1.09) and goods index (0.97), a factor of 1.03. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.

Add-on prices
Add-onLocal range
Add stairs (flat)$1,450 – $2,700

Pick a size, pick a tier: wood deck pricing in Bridgeport

Three bands are cut from the same cited range and localized for Bridgeport wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.

Basic

$7,700 to $10,800

Pressure-treated pine, low to the ground, simple rectangle

Standard

$10,100 to $13,200

Cedar or upgraded pine, stairs and a railing

Premium

$12,400 to $15,500

Hardwood decking, multi-level, built-in features

Cost by size and quality level
SizeBasicStandardPremium
10x12 (120 sq ft)$3,100 – $4,400$4,050 – $5,350$5,050 – $6,300
12x12 (144 sq ft)$3,750 – $5,250$4,850 – $6,400$6,000 – $7,500
16x20 (320 sq ft)$8,250 – $11,500$10,700 – $14,000$13,200 – $16,500
20x20 (400 sq ft)$10,300 – $14,400$13,400 – $17,500$16,500 – $20,600

Related projects, priced for Bridgeport

Because every project leans on different trades, Bridgeport's wage level does not move all prices equally. Against the US midpoint, paver patio runs +8% and composite deck +4%.

Related projects with local prices
ProjectSizeRangevs. US
Composite deck300 sq ft$12,500 – $25,100+4%
Concrete patio300 sq ft$1,300 – $4,300+7%
Paver patio300 sq ft$3,250 – $5,900+8%
Detached garage576 sq ft$30,700 – $61,700+6%

Why two Bridgeport quotes can differ

  • Permit

    Deck permits average $50-$150. Many cities skip the permit for small, low, freestanding decks.

  • Wood species

    Pressure-treated pine is the cheapest at $25-$50 per sq ft installed. Ipe runs $50-$70 and bamboo $27-$52 (HomeGuide).

  • Height and stairs

    A second-story deck needs more structure. New stairs run $1,400-$2,600 installed.

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $10,100 to $13,200 for Bridgeport, CT is attached.

A detailed PDF report of this estimate, $9

Multi-page report for Bridgeport, CT: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Wood deck in Bridgeport: your questions

+How much does it cost to build a wood deck in Bridgeport?

For 300 sq ft, expect $7,700 to $15,500 in the Bridgeport area. A standard-spec job lands at $10,100 to $13,200. Small jobs usually cost more per sq ft and large ones less.

+What is the price per sq ft for wood deck in Bridgeport?

About $25.50 to $51 per sq ft for materials and labor, plus $55 to $160 for the permit if one is needed. The US range is $25 to $50.

+Is wood deck cheaper in Bridgeport or Waterbury?

Waterbury is 25 miles away. The midpoint for 300 sq ft there is $11,500, which is 1% less than Bridgeport ($11,600). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Bridgeport?

About 46% at the midpoint, or $5,350 out of $11,600. Materials are 53% and permits 1%. Nationally, labor is 44%.

+What would 16x20 (320 sq ft) cost in Bridgeport?

$8,250 to $16,500. Pick a different size in the estimator above to get your own number.

+Does wood deck need a permit in Bridgeport?

Often, but rules are set by your city or county building office, so call before you hire. Budget $55 to $160 for fees in the Bridgeport area (our national range of $50 to $150 scaled by the local price level).

+Is Bridgeport expensive for wood deck compared with the rest of Connecticut?

Bridgeport is 0% below the Connecticut statewide estimate ($11,600 at the midpoint). We cover 5 metros in Connecticut; see the state page to compare them.

+What do carpenters earn in Bridgeport?

The BLS median is $30.39 an hour in the Bridgeport area, compared with $29.12 nationally. The 25th to 75th percentile range is $27.19 to $37.89.

+What do basic and premium wood deck work cost in Bridgeport?

For 300 sq ft, basic work runs $7,700 to $10,800 and premium work $12,400 to $15,500. Basic means: pressure-treated pine, low to the ground, simple rectangle. Premium means: hardwood decking, multi-level, built-in features.

+When is the best time to build a wood deck in Bridgeport?

Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through November. July and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.

+What does "add stairs" add in Bridgeport?

$1,450 to $2,700, from a national range scaled by the local wage and goods indexes.

Wood deck near Bridgeport

Wood deck: all pricesWood deck in ConnecticutAll projects in BridgeportConnecticut cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.