Wood deck cost in Huntsville, AL
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (300 sq ft)
- $6,750 – $13,600
- Per sq ft
- $22.50 – $44.50
- before permit
- Versus US midpoint
- −11%
- US $11,400
- Rank of 300 metros
- #246
- 1 = most expensive
If you want to build a wood deck in Huntsville, plan on $6,750 to $13,600 for 300 sq ft, all in. Per sq ft, that is $22.50 to $44.50 for materials and labor, with the permit on top. The local midpoint runs 11% lower than the national one. Carpenters earn a median of $23.54 an hour in the Huntsville area, 19% below the US median of $29.12.
Estimate your wood deck cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 300 sq ft in Huntsville, AL, standard level
$8,800 to $11,500
About $29 to $38 per sq ft before permits. Labor is about 39% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $5,250 | $6,900 |
| Labor | $3,450 | $4,500 |
| Permits and fees | $75 | $110 |
| Total | $8,800 | $11,500 |
Cost breakdown for 300 sq ft in Huntsville, AL
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $4,050 | $6,050 | $8,100 | 60% |
| Labor | $2,650 | $4,000 | $5,300 | 39% |
| Permits and fees | $45 | $95 | $140 | 1% |
| Total | $6,750 | $10,200 | $13,600 | 100% |
Why Huntsville prices look the way they do
We price the labor side from BLS wage data for 2 trades: carpenters at 80%, construction laborers at 20%. Weighted together, Huntsville wages are 0.81 times the national level. Labor makes up about 39% of the midpoint estimate (44% at national prices).
On the materials line, the BEA goods price index for the Huntsville metro is 96.4 (US = 100). The midpoint materials bill for 300 sq ft comes to $6,050, compared with $6,300 at national prices. Permit and inspection fees are scaled by the broader index (93.1) and land at $45 to $140.
Climate in Huntsville: timing your wood deck job
We use NOAA's 1991-2020 climate normals for Huntsville Intl Ap (5 miles from the city center). These are 30-year monthly averages, not forecasts.
September through June is the stretch where exterior installation runs into the fewest weather problems in Huntsville (10 of 12 months). July and August have an average daytime high of 90°F or more.
Huntsville gets about 54 inches of precipitation in a normal year, including roughly 2 inches of snow. The wettest months are February, March and December (5.9 inches in December). Inside the workable window, September and October are the driest, at 3.5 and 3.6 inches. The station averages about 62 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 52 | 33 | 5.0 | Workable |
| Feb | 57 | 36 | 5.1 | Workable |
| Mar | 66 | 43 | 5.4 | Workable |
| Apr | 75 | 51 | 4.9 | Workable |
| May | 83 | 60 | 4.7 | Workable |
| Jun | 89 | 68 | 4.1 | Workable |
| Jul | 92 | 71 | 4.5 | Hot |
| Aug | 91 | 70 | 3.5 | Hot |
| Sep | 87 | 63 | 3.5 | Workable |
| Oct | 76 | 52 | 3.6 | Workable |
| Nov | 64 | 41 | 4.3 | Workable |
| Dec | 55 | 36 | 5.9 | Workable |
Specs and site conditions that change a Huntsville bid
Replacement versus new
Deck replacement costs $30-$55 per sq ft because of demolition and haul-away.
Permit
Deck permits average $50-$150. Many cities skip the permit for small, low, freestanding decks.
Wood species
Pressure-treated pine is the cheapest at $25-$50 per sq ft installed. Ipe runs $50-$70 and bamboo $27-$52 (HomeGuide).
Huntsville labor market for wood deck
Wages are the part of this estimate that changes most from town to town. 2 trades carry the job here, and each is compared with its US median. The weighted result for Huntsville is 0.81 times the national level.
For carpenters (47-2031, weighted 80%) the local median is $23.54 an hour, which is 19% below the national $29.12. The middle half of them earn between $20.69 and $28.06 an hour. BLS counts 430 of them working in the area, 16.1 for every 10,000 jobs (US: 43.1), so the local bench is thinner than average.
Construction laborers (47-2061), 20% of the weighting: a median of $18.03 an hour, 20% below the US median of $22.66. The middle half of them earn between $14.00 and $21.95 an hour. About 1,670 work in the metro. That is 62.6 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.
Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($28.06 an hour) instead of the median, the labor line grows by about $610. At the 25th percentile ($20.69) it shrinks by about $390. The total moves by 6.1% or 3.8%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 266,650 jobs in the Huntsville area. That makes it the 99th largest of the 300 metros we cover, with 0.17% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 80% | $20.69 | $23.54 | $28.06 | $29.12 | 0.81 | metro |
| Construction laborers (47-2061) | 20% | $14.00 | $18.03 | $21.95 | $22.66 | 0.80 | metro |
| Blended | 100% | 0.81 | |||||
Pick a size, pick a tier: wood deck pricing in Huntsville
Three bands are cut from the same cited range and localized for Huntsville wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.
Basic
$6,750 to $9,450
Pressure-treated pine, low to the ground, simple rectangle
Standard
$8,800 to $11,500
Cedar or upgraded pine, stairs and a railing
Premium
$10,800 to $13,600
Hardwood decking, multi-level, built-in features
| Size | Basic | Standard | Premium |
|---|---|---|---|
| 10x12 (120 sq ft) | $2,750 – $3,850 | $3,550 – $4,650 | $4,400 – $5,500 |
| 12x12 (144 sq ft) | $3,250 – $4,600 | $4,250 – $5,600 | $5,250 – $6,600 |
| 16x20 (320 sq ft) | $7,200 – $10,100 | $9,400 – $12,300 | $11,600 – $14,400 |
| 20x20 (400 sq ft) | $9,000 – $12,600 | $11,700 – $15,300 | $14,400 – $18,000 |
Planning more than one job in Huntsville?
Because every project leans on different trades, Huntsville's wage level does not move all prices equally. Against the US midpoint, detached garage runs −11% and composite deck −13%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Composite deck | 300 sq ft | $10,500 – $21,000 | −13% |
| Concrete patio | 300 sq ft | $1,150 – $3,500 | −12% |
| Paver patio | 300 sq ft | $2,650 – $4,800 | −12% |
| Detached garage | 576 sq ft | $25,900 – $51,900 | −11% |
Optional extras in Huntsville
Extras are quoted nationally and then scaled to Huntsville by the average of the local wage index (0.81) and goods index (0.96), a factor of 0.88. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add stairs (flat) | $1,250 – $2,300 |
Huntsville against nearby metros and the rest of Alabama
Same job, same size (300 sq ft), priced for the nearest metros. Nashville is the priciest of the group at $10,800. Dalton is the cheapest at $9,700.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Huntsville, ALthis page | $6,750 – $13,600 | $10,200 | |
| Decatur, AL30 miles | $6,850 – $13,700 | $10,300 | +1% |
| Chattanooga, TN80 miles | $6,900 – $13,800 | $10,400 | +2% |
| Nashville, TN90 miles | $7,150 – $14,400 | $10,800 | +6% |
| Birmingham, AL90 miles | $6,850 – $13,700 | $10,300 | +1% |
| Dalton, GA105 miles | $6,450 – $12,900 | $9,700 | −5% |
| Alabama (statewide) | $6,700 – $13,500 | $10,100 | −1% |
| United States | $7,550 – $15,200 | $11,400 | +12% |
Across 300 US metros, Huntsville comes in at #246 from the top. The priciest is Honolulu, HI at $14,900; the cheapest is Brownsville, TX at $9,050 (midpoints, 300 sq ft). Statewide, Huntsville is 1% above the Alabama figure.
Other Alabama metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Birmingham, AL | 520,290 jobs | $6,850 – $13,700 | $10,300 | +1% |
| Mobile, AL | 172,550 jobs | $6,700 – $13,500 | $10,100 | level |
| Montgomery, AL | 165,550 jobs | $6,650 – $13,400 | $10,000 | −1% |
| Tuscaloosa, AL | 108,460 jobs | $6,750 – $13,500 | $10,100 | level |
| Daphne, AL | 87,120 jobs | $6,700 – $13,400 | $10,000 | −1% |
| Auburn, AL | 72,710 jobs | $6,650 – $13,400 | $10,000 | −1% |
Cities with a workforce like Huntsville's
Big cities and small ones price differently, so here is Huntsville against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Chattanooga, TN | 268,750 jobs | $6,900 – $13,800 | $10,400 | +2% |
| Lakeland, FL | 265,280 jobs | $6,650 – $13,300 | $10,000 | −2% |
| Poughkeepsie, NY | 268,970 jobs | $8,200 – $16,500 | $12,300 | +22% |
| Spokane, WA | 255,820 jobs | $7,850 – $15,800 | $11,800 | +17% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $8,800 to $11,500 for Huntsville, AL is attached.
Take this estimate with you: PDF report, $9
Multi-page report for Huntsville, AL: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Wood deck in Huntsville: your questions
+How much does it cost to build a wood deck in Huntsville?
For 300 sq ft, expect $6,750 to $13,600 in the Huntsville area. A standard-spec job lands at $8,800 to $11,500. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for wood deck in Huntsville?
About $22.50 to $44.50 per sq ft for materials and labor, plus $45 to $140 for the permit if one is needed. The US range is $25 to $50.
+Is wood deck cheaper in Huntsville or Decatur?
Decatur is 30 miles away. The midpoint for 300 sq ft there is $10,300, which is 1% more than Huntsville ($10,200). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Huntsville?
About 39% at the midpoint, or $4,000 out of $10,200. Materials are 60% and permits 1%. Nationally, labor is 44%.
+What would 16x20 (320 sq ft) cost in Huntsville?
$7,200 to $14,400. Pick a different size in the estimator above to get your own number.
+Does wood deck need a permit in Huntsville?
Often, but rules are set by your city or county building office, so call before you hire. Budget $45 to $140 for fees in the Huntsville area (our national range of $50 to $150 scaled by the local price level).
+Is Huntsville expensive for wood deck compared with the rest of Alabama?
Huntsville is 1% above the Alabama statewide estimate ($10,100 at the midpoint). We cover 9 metros in Alabama; see the state page to compare them.
+What do carpenters earn in Huntsville?
The BLS median is $23.54 an hour in the Huntsville area, compared with $29.12 nationally. The 25th to 75th percentile range is $20.69 to $28.06.
+What do basic and premium wood deck work cost in Huntsville?
For 300 sq ft, basic work runs $6,750 to $9,450 and premium work $10,800 to $13,600. Basic means: pressure-treated pine, low to the ground, simple rectangle. Premium means: hardwood decking, multi-level, built-in features.
+When is the best time to build a wood deck in Huntsville?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are September through June. September and October are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add stairs" add in Huntsville?
$1,250 to $2,300, from a national range scaled by the local wage and goods indexes.
Wood deck near Huntsville
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does It Cost to Build a Deck? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- HomeGuide: How Much Does Composite Decking Cost? (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020