Skip to content
CostLocal

Window replacement cost in Clarksville, TN

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (10 windows)
$4,150 – $14,000
Per window
$415 – $1,400
before permit
Versus US midpoint
−7%
US $9,750
Rank of 300 metros
#207
1 = most expensive

Local price for replacement windows in the Clarksville area: $4,150 to $14,000 for 10 windows. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 7% lower than the US figure. Glaziers earn a median of $23.37 an hour in the Clarksville area, 15% below the US median of $27.44.

Estimate your window replacement cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Mid-grade vinyl or composite, a few larger units

Estimated cost for 10 windows in Clarksville, TN, standard level

$7,100 to $11,000

About $710 to $1,104 per window before permits. Labor is about 25% of the bill.

Cost breakdown
PartLowHigh
Materials$5,200$8,400
Labor$1,900$2,600
Permits and fees$0$0
Total$7,100$11,000
Save and get a PDF report

Cost breakdown for 10 windows in Clarksville, TN

Part of the jobLowMidpointHighShare
Materials$2,800$6,800$10,80075%
Labor$1,350$2,250$3,15025%
Permits and fees$0$0$00%
Total$4,150$9,050$14,000100%

What is behind the Clarksville number

Labor is 25% of the midpoint bill here, against 27% nationally. The mix of trades behind this job is glaziers (50%), carpenters (40%), general maintenance and repair workers (10%). We weight each trade's local median wage by that share and compare it with the national median. In Clarksville the blended ratio comes out at 0.84. BLS does not publish this trade for the metro, so we used the Tennessee statewide median.

Materials are scaled with BEA's regional price parity for goods. Clarksville is at 96.2 against 100 for the US, so a materials line of $7,100 nationally becomes $6,800 here (midpoint, 10 windows). Permits follow the all-items index of 90.9: $0 to $0.

Data note: 50% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Clarksville. The wage table below marks each row.

The best months for windows in Clarksville

Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Clarksville Wwtp (in the city). They are 30-year averages, so any one year can run hotter, colder or wetter.

For exterior installation, the comfortable months in Clarksville are September through June: 10 of 12. Outside them, July and August have an average daytime high of 90°F or more.

Clarksville gets about 54 inches of precipitation in a normal year. The wettest months are April, May and December (5.6 inches in May). Inside the workable window, January and September are the driest, at 4.0 and 3.4 inches. The station averages about 57 days a year at 90°F or above.

We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.

Monthly normals, Clarksville Wwtp (NOAA, 1991-2020)
MonthAvg high °FAvg low °FPrecip (in)For this job
Jan47284.0Workable
Feb52314.5Workable
Mar61384.8Workable
Apr72475.0Workable
May79575.6Workable
Jun87654.7Workable
Jul90694.6Hot
Aug90673.7Hot
Sep84603.4Workable
Oct72484.3Workable
Nov60374.1Workable
Dec50314.9Workable

What nearby projects cost in Clarksville

Jobs that often go together with windows are priced below at their usual sizes, using the same Clarksville wage and price inputs. Compared with national midpoints, garage door comes out highest (−7%) and vinyl siding lowest (−11%); the gap comes from the trades each job uses.

Related projects with local prices
ProjectSizeRangevs. US
Patio door1 door$550 – $5,400−10%
Front door1 door$440 – $2,350−7%
Storm door1 door$320 – $870−9%
Vinyl siding2,100 sq ft of wall$7,500 – $22,500−11%
Garage door1 door$640 – $3,450−7%

Pick a size, pick a tier: window replacement pricing in Clarksville

The cited range is split into basic, standard and premium bands, then scaled to Clarksville. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from a few windows (5 windows) to whole house (25 windows).

Basic

$4,150 to $8,100

Standard vinyl single-hung, same openings

Standard

$7,100 to $11,000

Mid-grade vinyl or composite, a few larger units

Premium

$10,100 to $14,000

Fiberglass or wood, large or custom sizes

Cost by size and quality level
SizeBasicStandardPremium
a few windows (5 windows)$2,050 – $4,050$3,550 – $5,500$5,050 – $7,000
small house (10 windows)$4,150 – $8,100$7,100 – $11,000$10,100 – $14,000
average house (15 windows)$6,200 – $12,100$10,700 – $16,600$15,100 – $21,000
whole house (25 windows)$10,400 – $20,200$17,800 – $27,600$25,100 – $35,000

Why two Clarksville quotes can differ

  • Window type

    Single-hung and picture windows are cheapest; bay and bow windows can reach $3,000-$8,000+.

  • Count

    Replacing 10 to 15 windows runs $4,500-$22,500; at 25 windows it is $11,250-$37,500.

  • Permit

    Window permits are $50-$200 each, or $400-$600 total for a multi-window job, and are often only needed when you change the opening (HomeGuide). No permit fee is included here because many cities do not ask for one on same-size replacements.

Is Clarksville cheap or dear? The local comparison

Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 10 windows range from $9,000 to $9,500 across Clarksville and its five closest metros.

Comparison with nearby areas
AreaRangeMidpointvs. here
Clarksville, TNthis page$4,150 – $14,000$9,050
Nashville, TN65 miles$4,350 – $14,400$9,400+3%
Bowling Green, KY70 miles$4,200 – $14,100$9,150+1%
Evansville, IN95 miles$4,400 – $14,500$9,500+4%
Jackson, TN95 miles$4,150 – $14,000$9,050level
Huntsville, AL140 miles$4,100 – $13,900$9,000−1%
Tennessee (statewide)$4,150 – $14,000$9,100level
United States$4,500 – $15,000$9,750+7%

Out of the 300 metros we cover, Clarksville ranks #207 for the cost of this job (#1 is the most expensive). Statewide, Clarksville is 0% below the Tennessee figure.

Elsewhere in Tennessee

Tennessee metros compared with Clarksville
MetroSizeRangeMidpointvs. here
Nashville, TN1,099,300 jobs$4,350 – $14,400$9,400+3%
Memphis, TN611,670 jobs$4,150 – $14,000$9,100level
Knoxville, TN424,600 jobs$4,150 – $14,100$9,100level
Chattanooga, TN268,750 jobs$4,150 – $14,000$9,050level
Kingsport, TN119,560 jobs$4,150 – $14,000$9,050level
Jackson, TN84,530 jobs$4,150 – $14,000$9,050level

Metros of a similar size

Big cities and small ones price differently, so here is Clarksville against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Charleston, WV103,450 jobs$4,150 – $14,000$9,050level
Lafayette, IN102,200 jobs$4,400 – $14,600$9,500+5%
Gainesville, GA103,870 jobs$4,100 – $13,900$9,050level
Lake Charles, LA101,690 jobs$4,050 – $13,600$8,800−3%

Who does the work: Clarksville trade wages

The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Clarksville the blend is 0.84.

Glaziers (47-2121) carry 50% of the labor weighting. BLS does not publish this trade for the Clarksville metro, so we used the Tennessee statewide median: $23.37 an hour against $27.44 for the US. The middle half of them earn between $21.42 and $28.39 an hour.

Carpenters (47-2031), 40% of the weighting: a median of $23.60 an hour, 19% below the US median of $29.12. The middle half of them earn between $21.48 and $28.68 an hour. About 290 work in the metro. That is 28.1 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.

For general maintenance and repair workers (49-9071, weighted 10%) the local median is $22.58 an hour, which is 5% below the national $23.84. The middle half of them earn between $18.07 and $28.47 an hour. BLS counts 1,140 of them working in the area, 110.4 for every 10,000 jobs (US: 98.4), so the local bench is about average.

A quick sensitivity check: moving the lead trade (glaziers) from the median to the 75th percentile wage adds about $240 to the midpoint estimate; the 25th percentile takes off about $95. That is a swing of roughly 1.0% to 2.7% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.

Clarksville has 103,220 jobs in total (BLS, May 2025), ranking 200th by size among the 300 metros on this site.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Glaziers (47-2121)50%$21.42$23.37$28.39$27.440.85state
Carpenters (47-2031)40%$21.48$23.60$28.68$29.120.81metro
General maintenance and repair workers (49-9071)10%$18.07$22.58$28.47$23.840.95metro
Blended100%0.84

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $7,100 to $11,000 for Clarksville, TN is attached.

Take this estimate with you: PDF report, $9

Multi-page report for Clarksville, TN: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Window replacement in Clarksville: your questions

+How much does it cost to replace windows in Clarksville?

For 10 windows, expect $4,150 to $14,000 in the Clarksville area. A standard-spec job lands at $7,100 to $11,000. Small jobs usually cost more per window and large ones less.

+What is the price per window for windows in Clarksville?

About $415 to $1,400 per window for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $450 to $1,500.

+Is windows cheaper in Clarksville or Nashville?

Nashville is 65 miles away. The midpoint for 10 windows there is $9,400, which is 3% more than Clarksville ($9,050). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Clarksville?

About 25% at the midpoint, or $2,250 out of $9,050. Materials are 75% and permits 0%. Nationally, labor is 27%.

+What would average house (15 windows) cost in Clarksville?

$6,200 to $21,000. Pick a different size in the estimator above to get your own number.

+Does windows need a permit in Clarksville?

Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Clarksville area (our national range of $0 to $0 scaled by the local price level).

+Is Clarksville expensive for windows compared with the rest of Tennessee?

Clarksville is 0% below the Tennessee statewide estimate ($9,100 at the midpoint). We cover 8 metros in Tennessee; see the state page to compare them.

+What do glaziers earn in Clarksville?

BLS has no published metro figure here, so we use the statewide median of $23.37 an hour, compared with $27.44 nationally. The 25th to 75th percentile range is $21.42 to $28.39.

+What do basic and premium windows work cost in Clarksville?

For 10 windows, basic work runs $4,150 to $8,100 and premium work $10,100 to $14,000. Basic means: standard vinyl single-hung, same openings. Premium means: fiberglass or wood, large or custom sizes.

+When is the best time to replace windows in Clarksville?

Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are September through June. January and September are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.

Window replacement near Clarksville

Window replacement: all pricesWindow replacement in TennesseeAll projects in ClarksvilleTennessee cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = 65% of the low installed price and 75% of the high one, from HomeGuide's statement that the window unit is 65-75% of replacement cost.