Vinyl siding cost in South Dakota
Statewide estimate from BLS wages and BEA prices. Reviewed Nov 4, 2026.
- Statewide range (2,100 sq ft of wall)
- $7,550 – $22,700
- Per sq ft of wall
- $3.60 – $11
- before permit
- Versus US midpoint
- −10%
- US $16,800
- Metros covered
- 2
What does it cost to install vinyl siding in South Dakota? Plan on $7,550 to $22,700 for 2,100 sq ft of wall. Wages (0.85x the US blend), materials (price index 95.5) and permit costs (88.6) put the state below the national midpoint by 10%.
Inside South Dakota, the metros we cover range from $15,100 (Rapid City) to $15,300 (Sioux Falls) at the midpoint.
Estimate your vinyl siding cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 2,100 sq ft of wall in South Dakota (statewide), standard level
$12,100 to $18,100
About $5.75 to $8.65 per sq ft of wall before permits. Labor is about 47% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $6,400 | $9,600 |
| Labor | $5,700 | $8,500 |
| Permits and fees | $0 | $0 |
| Total | $12,100 | $18,100 |
Cost breakdown for 2,100 sq ft of wall in South Dakota
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $4,000 | $8,000 | $12,000 | 53% |
| Labor | $3,550 | $7,100 | $10,600 | 47% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $7,550 | $15,100 | $22,700 | 100% |
South Dakota labor market for vinyl siding
Statewide wages come from BLS's state-level estimates, which blend big cities with small towns and rural areas. 3 trades drive the labor line for this job, and the weighted ratio against the national wage level is 0.85 for South Dakota.
For carpenters (47-2031, weighted 60%) the local median is $23.14 an hour, which is 21% below the national $29.12. The middle half of them earn between $20.29 and $28.87 an hour. BLS counts 4,560 of them working in the state, 99.7 for every 10,000 jobs (US: 43.1), so the local bench is deeper than average.
Construction laborers (47-2061), 30% of the weighting: a median of $21.98 an hour, 3% below the US median of $22.66. The middle half of them earn between $18.42 and $23.14 an hour. About 1,780 work in the state. That is 38.9 per 10,000 jobs, compared with 70.5 nationally, so expect fewer local crews to bid.
For sheet metal workers (47-2211, weighted 10%) the local median is $22.98 an hour, which is 23% below the national $29.71. The middle half of them earn between $20.47 and $29.01 an hour. BLS counts 320 of them working in the state, 7.0 for every 10,000 jobs (US: 7.7), so the local bench is about average.
A crew paid at the 75th percentile for carpenters ($28.87 an hour) would add about $990 to the statewide midpoint; one at the 25th percentile ($20.29) would take off about $490. Use that as a rough guide to how far a bid can sit from our midpoint on wages alone.
BLS counts 457,380 jobs across South Dakota (May 2025), which is 0.3% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 60% | $20.29 | $23.14 | $28.87 | $29.12 | 0.79 | state |
| Construction laborers (47-2061) | 30% | $18.42 | $21.98 | $23.14 | $22.66 | 0.97 | state |
| Sheet metal workers (47-2211) | 10% | $20.47 | $22.98 | $29.01 | $29.71 | 0.77 | state |
| Blended | 100% | 0.85 | |||||
Which South Dakota city is cheapest for vinyl siding?
1 of the 2 metros sit above the statewide midpoint of $15,100, and the top-to-bottom gap is 1%. Each row prices the default size with that metro's own BLS wages and BEA price levels, so the gap between rows is real local variation rather than a flat markup.
| Metro | Range (2,100 sq ft of wall) | Midpoint | vs. state |
|---|---|---|---|
| Sioux Falls, SD | $7,650 – $22,900 | $15,300 | +1% |
| Rapid City, SD | $7,550 – $22,700 | $15,100 | level |
Related projects, priced for South Dakota
The table prices neighboring jobs at their usual sizes using statewide South Dakota wages and prices. Against national midpoints, attic insulation comes out highest (−5%) and metal roof lowest (−10%), because each job leans on different trades.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $5,500 – $11,400 | −10% |
| Gutters | 160 linear ft | $1,150 – $3,850 | −8% |
| Window replacement | 10 windows | $4,100 – $13,800 | −8% |
| Attic insulation | 1,000 sq ft | $950 – $3,800 | −5% |
| Metal roof | 2,000 sq ft of roof | $8,900 – $29,400 | −10% |
How South Dakota compares with nearby states
South Dakota ranks 46 of 51 (the 50 states plus DC) for vinyl siding, where 1 is the most expensive. The costliest is Hawaii at $21,900 and the cheapest Arkansas at $14,500, both for 2,100 sq ft of wall at the midpoint. South Dakota sits at $15,100. The five states closest by workforce center are listed below.
| State | Distance | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Nebraska | 220 miles away | $7,750 – $23,200 | $15,500 | +2% |
| North Dakota | 220 miles away | $8,200 – $24,500 | $16,400 | +8% |
| Minnesota | 290 miles away | $9,050 – $27,100 | $18,100 | +19% |
| Iowa | 330 miles away | $8,100 – $24,300 | $16,200 | +7% |
| Wyoming | 350 miles away | $8,000 – $24,000 | $16,000 | +6% |
Vinyl siding: what moves the price in South Dakota
Style
Clapboard vinyl siding runs $4-$7 per sq ft installed; board-and-batten is $5-$9 (HomeGuide).
Old siding removal
Taking the old siding off costs $0.70-$2.00 per sq ft. Check that disposal is included.
Labor and season
Siding labor is $40-$80 an hour or $2-$6 per sq ft, and it is highest in warm months.
Wall area is not floor area
A 2,000 sq ft house usually has more wall area than floor area once you count gables and two stories. Measure the wall, not the floor.
Quality levels and sizes in South Dakota
The cited range is cut into three overlapping bands (basic, standard and premium) and scaled to statewide South Dakota wages and prices. The grid prices the same bands at 3 common sizes.
Basic
$7,550 to $13,600
Basic clapboard siding, simple house
Standard
$12,100 to $18,100
Mid-grade panels, standard trim and corners
Premium
$16,600 to $22,700
Premium or board-and-batten, many corners and gables
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small house (1,200 sq ft of wall) | $4,300 – $7,800 | $6,900 – $10,400 | $9,500 – $13,000 |
| average house (2,100 sq ft of wall) | $7,550 – $13,600 | $12,100 – $18,100 | $16,600 – $22,700 |
| large house (3,000 sq ft of wall) | $10,800 – $19,400 | $17,300 – $25,900 | $23,800 – $32,400 |
South Dakota seasons and vinyl siding
Season matters for vinyl siding. For each South Dakota metro below we took NOAA's 1991-2020 monthly normals from the nearest suitable station and counted comfortable months for exterior installation.
Every South Dakota metro on the list has 9 comfortable months, though rainfall ranges from 20 inches a year in Rapid City to 28 in Sioux Falls.
We do not adjust prices by month, because we have no reliable published data on seasonal pricing. Timing is still worth raising when you collect bids.
| Metro | Jan avg low °F | Jul avg high °F | Precip (in/yr) | Comfortable months |
|---|---|---|---|---|
| Sioux Falls | 9 | 85 | 28 | 9: March through November |
| Rapid City | 16 | 84 | 20 | 9: March through November |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $12,100 to $18,100 for South Dakota is attached.
Detailed vinyl siding report for South Dakota, $9
Multi-page report for South Dakota: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl siding in South Dakota: your questions
+How much does it cost to install vinyl siding in South Dakota?
$7,550 to $22,700 for 2,100 sq ft of wall, using statewide wages and prices. Metro areas inside South Dakota can sit above or below that.
+Which city in South Dakota is cheapest for vinyl siding?
Rapid City at about $15,100 (midpoint, 2,100 sq ft of wall). The priciest is Sioux Falls at $15,300.
+Is vinyl siding cheaper in South Dakota than the US average?
It is 10% cheaper: $15,100 against $16,800 for 2,100 sq ft of wall at the midpoint.
+What share of the price is labor in South Dakota?
About 47% ($7,100). Materials are 53%. Statewide labor for this job is weighted 0.85x the national wage level.
+What do carpenters earn in South Dakota?
The BLS statewide median is $23.14 an hour, against $29.12 for the US. The 25th to 75th percentile range is $20.29 to $28.87.
+Where does South Dakota rank for vinyl siding costs?
46th most expensive of 51 (the 50 states plus DC) at the midpoint, $15,100 for 2,100 sq ft of wall. Rank 1 is the costliest.
+What do basic and premium vinyl siding work cost in South Dakota?
For 2,100 sq ft of wall, basic work runs $7,550 to $13,600 and premium work $16,600 to $22,700. Basic means: basic clapboard siding, simple house. Premium means: premium or board-and-batten, many corners and gables.
+Does the season matter for vinyl siding in South Dakota?
Yes where winters or summers are hard. Of the South Dakota metros we cover, Sioux Falls has the most comfortable months (9 of 12) based on NOAA 1991-2020 normals. Our prices do not change by month, so ask contractors whether they charge more or less in busy and slow seasons.
Vinyl siding by city in South Dakota
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Vinyl Siding Cost? (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed price minus HomeGuide's $2-$6 per sq ft labor figure, which it says is around half the project cost.