Vinyl siding cost in Charlotte, NC
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (2,100 sq ft of wall)
- $7,750 – $23,200
- Per sq ft of wall
- $3.70 – $11
- before permit
- Versus US midpoint
- −8%
- US $16,800
- Rank of 300 metros
- #190
- 1 = most expensive
Charlotte homeowners pay roughly $7,750 to $23,200 to install vinyl siding at 2,100 sq ft of wall, or $3.70 to $11 per sq ft of wall (permit not included). Against the US midpoint, Charlotte is 8% lower. Carpenters earn a median of $24.50 an hour in the Charlotte area, 16% below the US median of $29.12.
Estimate your vinyl siding cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 2,100 sq ft of wall in Charlotte, NC, standard level
$12,400 to $18,600
About $5.90 to $8.85 per sq ft of wall before permits. Labor is about 48% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $6,500 | $9,750 |
| Labor | $5,900 | $8,850 |
| Permits and fees | $0 | $0 |
| Total | $12,400 | $18,600 |
Cost breakdown for 2,100 sq ft of wall in Charlotte, NC
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $4,050 | $8,100 | $12,200 | 52% |
| Labor | $3,700 | $7,400 | $11,100 | 48% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $7,750 | $15,500 | $23,200 | 100% |
Where the Charlotte price comes from
We price the labor side from BLS wage data for 3 trades: carpenters at 60%, construction laborers at 30%, sheet metal workers at 10%. Weighted together, Charlotte wages are 0.88 times the national level. Labor makes up about 48% of the midpoint estimate (50% at national prices).
On the materials line, the BEA goods price index for the Charlotte metro is 96.6 (US = 100). The midpoint materials bill for 2,100 sq ft of wall comes to $8,100, compared with $8,400 at national prices. Permit and inspection fees are scaled by the broader index (97.3) and land at $0 to $0.
Specs and site conditions that change a Charlotte bid
Old siding removal
Taking the old siding off costs $0.70-$2.00 per sq ft. Check that disposal is included.
Labor and season
Siding labor is $40-$80 an hour or $2-$6 per sq ft, and it is highest in warm months.
Wall area is not floor area
A 2,000 sq ft house usually has more wall area than floor area once you count gables and two stories. Measure the wall, not the floor.
Cost by quality level and size in Charlotte
Three bands are cut from the same cited range and localized for Charlotte wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.
Basic
$7,750 to $13,900
Basic clapboard siding, simple house
Standard
$12,400 to $18,600
Mid-grade panels, standard trim and corners
Premium
$17,000 to $23,200
Premium or board-and-batten, many corners and gables
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small house (1,200 sq ft of wall) | $4,450 – $7,950 | $7,100 – $10,600 | $9,750 – $13,300 |
| average house (2,100 sq ft of wall) | $7,750 – $13,900 | $12,400 – $18,600 | $17,000 – $23,200 |
| large house (3,000 sq ft of wall) | $11,100 – $19,900 | $17,700 – $26,600 | $24,400 – $33,200 |
Planning more than one job in Charlotte?
Because every project leans on different trades, Charlotte's wage level does not move all prices equally. Against the US midpoint, attic insulation runs −5% and metal roof −9%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $5,550 – $11,500 | −8% |
| Gutters | 160 linear ft | $1,200 – $3,950 | −7% |
| Window replacement | 10 windows | $4,200 – $14,100 | −6% |
| Attic insulation | 1,000 sq ft | $940 – $3,800 | −5% |
| Metal roof | 2,000 sq ft of roof | $9,050 – $29,900 | −9% |
When to schedule vinyl siding in Charlotte
We use NOAA's 1991-2020 climate normals for Charlotte Douglas Ap (5 miles from the city center). These are 30-year monthly averages, not forecasts.
August through June is the stretch where exterior installation runs into the fewest weather problems in Charlotte (11 of 12 months). July has an average daytime high of 90°F or more.
Charlotte gets about 44 inches of precipitation in a normal year, including roughly 4 inches of snow. The wettest months are March, June and August (4.3 inches in August). Inside the workable window, February and October are the driest, at 3.1 and 3.2 inches. The station averages about 49 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 52 | 32 | 3.5 | Workable |
| Feb | 57 | 35 | 3.1 | Workable |
| Mar | 64 | 41 | 4.0 | Workable |
| Apr | 73 | 49 | 3.8 | Workable |
| May | 80 | 58 | 3.4 | Workable |
| Jun | 87 | 66 | 4.0 | Workable |
| Jul | 90 | 70 | 3.7 | Hot |
| Aug | 89 | 69 | 4.3 | Workable |
| Sep | 83 | 63 | 3.7 | Workable |
| Oct | 73 | 50 | 3.2 | Workable |
| Nov | 63 | 40 | 3.3 | Workable |
| Dec | 55 | 35 | 3.6 | Workable |
Is Charlotte cheap or dear? The local comparison
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 2,100 sq ft of wall range from $15,100 to $15,500 across Charlotte and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Charlotte, NCthis page | $7,750 – $23,200 | $15,500 | |
| Hickory, NC60 miles | $7,550 – $22,700 | $15,100 | −2% |
| Spartanburg, SC65 miles | $7,750 – $23,200 | $15,500 | level |
| Winston, NC70 miles | $7,600 – $22,800 | $15,200 | −2% |
| Columbia, SC75 miles | $7,550 – $22,600 | $15,100 | −3% |
| Greensboro, NC80 miles | $7,600 – $22,800 | $15,200 | −2% |
| North Carolina (statewide) | $7,650 – $22,900 | $15,300 | −1% |
| United States | $8,400 – $25,200 | $16,800 | +8% |
Across 300 US metros, Charlotte comes in at #190 from the top. The priciest is Honolulu, HI at $22,700; the cheapest is Brownsville, TX at $13,500 (midpoints, 2,100 sq ft of wall). Statewide, Charlotte is 1% above the North Carolina figure.
Other North Carolina metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Raleigh, NC | 743,120 jobs | $7,750 – $23,200 | $15,500 | level |
| Greensboro, NC | 365,410 jobs | $7,600 – $22,800 | $15,200 | −2% |
| Durham, NC | 344,020 jobs | $7,750 – $23,300 | $15,500 | level |
| Winston, NC | 271,980 jobs | $7,600 – $22,800 | $15,200 | −2% |
| Wilmington, NC | 191,280 jobs | $7,750 – $23,200 | $15,500 | level |
| Asheville, NC | 180,620 jobs | $7,800 – $23,400 | $15,600 | +1% |
Cities with a workforce like Charlotte's
Big cities and small ones price differently, so here is Charlotte against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Orlando, FL | 1,411,730 jobs | $7,550 – $22,600 | $15,100 | −3% |
| Baltimore, MD | 1,356,680 jobs | $8,550 – $25,600 | $17,100 | +10% |
| Tampa, FL | 1,447,120 jobs | $7,700 – $23,100 | $15,400 | −1% |
| St. Louis, MO | 1,341,320 jobs | $9,350 – $28,000 | $18,700 | +20% |
Local wages behind the labor line
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Charlotte is 0.88 times the national level.
For carpenters (47-2031, weighted 60%) the local median is $24.50 an hour, which is 16% below the national $29.12. The middle half of them earn between $22.52 and $28.49 an hour. BLS counts 3,730 of them working in the area, 27.5 for every 10,000 jobs (US: 43.1), so the local bench is thinner than average.
Construction laborers (47-2061), 30% of the weighting: a median of $22.04 an hour, in line with the US median of $22.66. The middle half of them earn between $18.36 and $23.92 an hour. About 10,840 work in the metro. That is 79.8 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.
For sheet metal workers (47-2211, weighted 10%) the local median is $24.46 an hour, which is 18% below the national $29.71. The middle half of them earn between $22.43 and $29.93 an hour. BLS counts 700 of them working in the area, 5.2 for every 10,000 jobs (US: 7.7), so the local bench is thinner than average.
Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($28.49 an hour) instead of the median, the labor line grows by about $690. At the 25th percentile ($22.52) it shrinks by about $340. The total moves by 4.5% or 2.2%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 1,358,370 jobs in the Charlotte-Concord-Gastonia area. That makes it the 21st largest of the 300 metros we cover, with 0.87% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 60% | $22.52 | $24.50 | $28.49 | $29.12 | 0.84 | metro |
| Construction laborers (47-2061) | 30% | $18.36 | $22.04 | $23.92 | $22.66 | 0.97 | metro |
| Sheet metal workers (47-2211) | 10% | $22.43 | $24.46 | $29.93 | $29.71 | 0.82 | metro |
| Blended | 100% | 0.88 | |||||
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $12,400 to $18,600 for Charlotte, NC is attached.
Detailed vinyl siding report for Charlotte, NC, $9
Multi-page report for Charlotte, NC: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl siding in Charlotte: your questions
+How much does it cost to install vinyl siding in Charlotte?
For 2,100 sq ft of wall, expect $7,750 to $23,200 in the Charlotte area. A standard-spec job lands at $12,400 to $18,600. Small jobs usually cost more per sq ft of wall and large ones less.
+What is the price per sq ft of wall for vinyl siding in Charlotte?
About $3.70 to $11 per sq ft of wall for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $4 to $12.
+Is vinyl siding cheaper in Charlotte or Hickory?
Hickory is 60 miles away. The midpoint for 2,100 sq ft of wall there is $15,100, which is 2% less than Charlotte ($15,500). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Charlotte?
About 48% at the midpoint, or $7,400 out of $15,500. Materials are 52% and permits 0%. Nationally, labor is 50%.
+What would average house (2,100 sq ft of wall) cost in Charlotte?
$7,750 to $23,200. Pick a different size in the estimator above to get your own number.
+Does vinyl siding need a permit in Charlotte?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Charlotte area (our national range of $0 to $0 scaled by the local price level).
+Is Charlotte expensive for vinyl siding compared with the rest of North Carolina?
Charlotte is 1% above the North Carolina statewide estimate ($15,300 at the midpoint). We cover 11 metros in North Carolina; see the state page to compare them.
+What do carpenters earn in Charlotte?
The BLS median is $24.50 an hour in the Charlotte area, compared with $29.12 nationally. The 25th to 75th percentile range is $22.52 to $28.49.
+What do basic and premium vinyl siding work cost in Charlotte?
For 2,100 sq ft of wall, basic work runs $7,750 to $13,900 and premium work $17,000 to $23,200. Basic means: basic clapboard siding, simple house. Premium means: premium or board-and-batten, many corners and gables.
+When is the best time to install vinyl siding in Charlotte?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are August through June. February and October are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Vinyl siding near Charlotte
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Vinyl Siding Cost? (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed price minus HomeGuide's $2-$6 per sq ft labor figure, which it says is around half the project cost.