Vinyl siding cost in Topeka, KS
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (2,100 sq ft of wall)
- $7,750 – $23,200
- Per sq ft of wall
- $3.70 – $11
- before permit
- Versus US midpoint
- −8%
- US $16,800
- Rank of 300 metros
- #192
- 1 = most expensive
Local price for new vinyl siding in the Topeka area: $7,750 to $23,200 for 2,100 sq ft of wall. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 8% lower than the US figure. Carpenters earn a median of $24.62 an hour in the Topeka area, 15% below the US median of $29.12.
Estimate your vinyl siding cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 2,100 sq ft of wall in Topeka, KS, standard level
$12,400 to $18,600
About $5.90 to $8.85 per sq ft of wall before permits. Labor is about 49% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $6,300 | $9,500 |
| Labor | $6,050 | $9,100 |
| Permits and fees | $0 | $0 |
| Total | $12,400 | $18,600 |
Cost breakdown for 2,100 sq ft of wall in Topeka, KS
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $3,950 | $7,900 | $11,800 | 51% |
| Labor | $3,800 | $7,600 | $11,400 | 49% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $7,750 | $15,500 | $23,200 | 100% |
Where the Topeka price comes from
Labor is 49% of the midpoint bill here, against 50% nationally. The mix of trades behind this job is carpenters (60%), construction laborers (30%), sheet metal workers (10%). We weight each trade's local median wage by that share and compare it with the national median. In Topeka the blended ratio comes out at 0.90.
Materials are scaled with BEA's regional price parity for goods. Topeka is at 94.0 against 100 for the US, so a materials line of $8,400 nationally becomes $7,900 here (midpoint, 2,100 sq ft of wall). Permits follow the all-items index of 88.8: $0 to $0.
Topeka against nearby metros and the rest of Kansas
Of the five closest metros, 3 are cheaper than Topeka. Wichita is the lowest at about $15,000 (midpoint, 2,100 sq ft of wall), 125 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Topeka, KSthis page | $7,750 – $23,200 | $15,500 | |
| Kansas City, MO75 miles | $8,450 – $25,300 | $16,900 | +9% |
| Wichita, KS125 miles | $7,500 – $22,500 | $15,000 | −3% |
| Lincoln, NE135 miles | $7,650 – $22,900 | $15,300 | −1% |
| Joplin, MO150 miles | $7,600 – $22,800 | $15,200 | −2% |
| Omaha, NE155 miles | $7,950 – $23,900 | $15,900 | +3% |
| Kansas (statewide) | $7,950 – $23,800 | $15,900 | +3% |
| United States | $8,400 – $25,200 | $16,800 | +8% |
Out of the 300 metros we cover, Topeka ranks #192 for the cost of this job (#1 is the most expensive). Statewide, Topeka is 3% below the Kansas figure.
Elsewhere in Kansas
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Wichita, KS | 308,570 jobs | $7,500 – $22,500 | $15,000 | −3% |
Metros of a similar size
Big cities and small ones price differently, so here is Topeka against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Columbus, GA | 116,380 jobs | $7,200 – $21,600 | $14,400 | −7% |
| Tyler, TX | 115,220 jobs | $7,100 – $21,400 | $14,200 | −8% |
| Longview, TX | 118,060 jobs | $7,150 – $21,500 | $14,300 | −8% |
| Charlottesville, VA | 114,780 jobs | $7,900 – $23,800 | $15,800 | +2% |
Why two Topeka quotes can differ
Old siding removal
Taking the old siding off costs $0.70-$2.00 per sq ft. Check that disposal is included.
Labor and season
Siding labor is $40-$80 an hour or $2-$6 per sq ft, and it is highest in warm months.
Wall area is not floor area
A 2,000 sq ft house usually has more wall area than floor area once you count gables and two stories. Measure the wall, not the floor.
What nearby projects cost in Topeka
Jobs that often go together with vinyl siding are priced below at their usual sizes, using the same Topeka wage and price inputs. Compared with national midpoints, attic insulation comes out highest (−3%) and roof replacement lowest (−10%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $5,450 – $11,300 | −10% |
| Gutters | 160 linear ft | $1,200 – $3,950 | −5% |
| Window replacement | 10 windows | $4,100 – $13,700 | −9% |
| Attic insulation | 1,000 sq ft | $990 – $3,900 | −3% |
| Metal roof | 2,000 sq ft of roof | $9,250 – $29,900 | −8% |
Who does the work: Topeka trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Topeka the blend is 0.90.
Carpenters (47-2031), 60% of the weighting: a median of $24.62 an hour, 15% below the US median of $29.12. The middle half of them earn between $22.76 and $29.63 an hour. About 360 work in the metro. That is 31.1 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.
For construction laborers (47-2061, weighted 30%) the local median is $22.15 an hour, which is in line with the national $22.66. The middle half of them earn between $17.78 and $23.66 an hour. BLS counts 810 of them working in the area, 70.0 for every 10,000 jobs (US: 70.5), so the local bench is about average.
Sheet metal workers (47-2211), 10% of the weighting: a median of $30.56 an hour, in line with the US median of $29.71. The middle half of them earn between $19.05 and $38.60 an hour. About 180 work in the metro. That is 15.6 per 10,000 jobs, compared with 7.7 nationally, which suggests plenty of local crews to bid.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $870 to the midpoint estimate; the 25th percentile takes off about $320. That is a swing of roughly 2.1% to 5.6% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Topeka has 115,750 jobs in total (BLS, May 2025), ranking 188th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 60% | $22.76 | $24.62 | $29.63 | $29.12 | 0.85 | metro |
| Construction laborers (47-2061) | 30% | $17.78 | $22.15 | $23.66 | $22.66 | 0.98 | metro |
| Sheet metal workers (47-2211) | 10% | $19.05 | $30.56 | $38.60 | $29.71 | 1.03 | metro |
| Blended | 100% | 0.90 | |||||
The best months for vinyl siding in Topeka
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Topeka Muni Ap (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Topeka are February through June and August through November: 9 of 12. Outside them, January and December have an average daytime high under 45°F, and July has an average daytime high of 90°F or more.
In January and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Topeka gets about 37 inches of precipitation in a normal year, including roughly 17 inches of snow. The wettest months are May, June and August (5.2 inches in May). Inside the workable window, February and November are the driest, at 1.3 and 1.8 inches. The station averages about 50 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 40 | 20 | 0.9 | Cold |
| Feb | 46 | 24 | 1.3 | Workable |
| Mar | 57 | 34 | 2.3 | Workable |
| Apr | 67 | 44 | 3.8 | Workable |
| May | 76 | 55 | 5.2 | Workable |
| Jun | 86 | 65 | 4.9 | Workable |
| Jul | 90 | 69 | 4.0 | Hot |
| Aug | 89 | 67 | 4.5 | Workable |
| Sep | 81 | 58 | 3.5 | Workable |
| Oct | 69 | 45 | 2.9 | Workable |
| Nov | 55 | 33 | 1.8 | Workable |
| Dec | 44 | 24 | 1.5 | Cold |
Topeka: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Topeka. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from small house (1,200 sq ft of wall) to large house (3,000 sq ft of wall).
Basic
$7,750 to $13,900
Basic clapboard siding, simple house
Standard
$12,400 to $18,600
Mid-grade panels, standard trim and corners
Premium
$17,000 to $23,200
Premium or board-and-batten, many corners and gables
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small house (1,200 sq ft of wall) | $4,400 – $7,950 | $7,100 – $10,600 | $9,750 – $13,300 |
| average house (2,100 sq ft of wall) | $7,750 – $13,900 | $12,400 – $18,600 | $17,000 – $23,200 |
| large house (3,000 sq ft of wall) | $11,100 – $19,900 | $17,700 – $26,500 | $24,300 – $33,200 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $12,400 to $18,600 for Topeka, KS is attached.
A detailed PDF report of this estimate, $9
Multi-page report for Topeka, KS: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl siding in Topeka: your questions
+How much does it cost to install vinyl siding in Topeka?
For 2,100 sq ft of wall, expect $7,750 to $23,200 in the Topeka area. A standard-spec job lands at $12,400 to $18,600. Small jobs usually cost more per sq ft of wall and large ones less.
+What is the price per sq ft of wall for vinyl siding in Topeka?
About $3.70 to $11 per sq ft of wall for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $4 to $12.
+Is vinyl siding cheaper in Topeka or Kansas City?
Kansas City is 75 miles away. The midpoint for 2,100 sq ft of wall there is $16,900, which is 9% more than Topeka ($15,500). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Topeka?
About 49% at the midpoint, or $7,600 out of $15,500. Materials are 51% and permits 0%. Nationally, labor is 50%.
+What would average house (2,100 sq ft of wall) cost in Topeka?
$7,750 to $23,200. Pick a different size in the estimator above to get your own number.
+Does vinyl siding need a permit in Topeka?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Topeka area (our national range of $0 to $0 scaled by the local price level).
+Is Topeka expensive for vinyl siding compared with the rest of Kansas?
Topeka is 3% below the Kansas statewide estimate ($15,900 at the midpoint). We cover 2 metros in Kansas; see the state page to compare them.
+What do carpenters earn in Topeka?
The BLS median is $24.62 an hour in the Topeka area, compared with $29.12 nationally. The 25th to 75th percentile range is $22.76 to $29.63.
+What do basic and premium vinyl siding work cost in Topeka?
For 2,100 sq ft of wall, basic work runs $7,750 to $13,900 and premium work $17,000 to $23,200. Basic means: basic clapboard siding, simple house. Premium means: premium or board-and-batten, many corners and gables.
+When is the best time to install vinyl siding in Topeka?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are February through June and August through November. February and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Vinyl siding near Topeka
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Vinyl Siding Cost? (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed price minus HomeGuide's $2-$6 per sq ft labor figure, which it says is around half the project cost.