Skip to content
CostLocal

Patio door cost in Janesville, WI

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (1 door)
$610 – $6,400
Per door
$613 – $6,380
before permit
Versus US midpoint
+6%
US $3,300
Rank of 300 metros
#45
1 = most expensive

A patio door in Janesville, WI usually costs $610 to $6,400 for 1 door. That works out to about $613 to $6,380 per door before permits. Compared with the national midpoint that is $200 more. Carpenters earn a median of $36.24 an hour in the Janesville area, 24% above the US median of $29.12.

Estimate your patio door cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Wider slider or French door with better glass

Estimated cost for 1 door in Janesville, WI, standard level

$2,350 to $4,650

About $2,343 to $4,650 per door before permits. Labor is about 54% of the bill.

Cost breakdown
PartLowHigh
Materials$1,100$2,100
Labor$1,250$2,550
Permits and fees$0$0
Total$2,350$4,650
Save and get a PDF report

Cost breakdown for 1 door in Janesville, WI

Part of the jobLowMidpointHighShare
Materials$380$1,600$2,80046%
Labor$240$1,900$3,55054%
Permits and fees$0$0$00%
Total$610$3,500$6,400100%

Why Janesville prices look the way they do

We price the labor side from BLS wage data for 3 trades: carpenters at 60%, glaziers at 30%, general maintenance and repair workers at 10%. Weighted together, Janesville wages are 1.19 times the national level. Labor makes up about 54% of the midpoint estimate (48% at national prices).

Materials are scaled with BEA's regional price parity for goods. Janesville is at 93.8 against 100 for the US, so a materials line of $1,700 nationally becomes $1,600 here (midpoint, 1 door). Permits follow the all-items index of 93.7: $0 to $0.

Data note: 30% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Janesville. The wage table below marks each row.

Janesville weather and the patio door calendar

Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Afton - Janesville Wwtp (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.

For exterior installation, the comfortable months in Janesville are March through November: 9 of 12. Outside them, January, February and December have an average daytime high under 45°F.

In January, February and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.

Janesville gets about 37 inches of precipitation in a normal year, including roughly 37 inches of snow. The wettest months are June, July and August (5.0 inches in June). Inside the workable window, March and November are the driest, at 2.1 and 2.3 inches. The station averages about 13 days a year at 90°F or above.

We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.

Monthly normals, Afton - Janesville Wwtp (NOAA, 1991-2020)
MonthAvg high °FAvg low °FPrecip (in)For this job
Jan28121.6Cold
Feb32151.6Cold
Mar45252.1Workable
Apr58363.6Workable
May70484.1Workable
Jun80585.0Workable
Jul83624.2Workable
Aug82604.3Workable
Sep75513.7Workable
Oct62403.0Workable
Nov46292.3Workable
Dec34181.9Cold

How Janesville compares

Same job, same size (1 door), priced for the nearest metros. Janesville is the priciest of the group. Racine is the cheapest at $3,250.

Comparison with nearby areas
AreaRangeMidpointvs. here
Janesville, WIthis page$610 – $6,400$3,500
Rockford, IL25 miles$610 – $6,250$3,450−2%
Madison, WI40 miles$610 – $6,350$3,500level
Kenosha, WI60 miles$630 – $6,300$3,450−1%
Milwaukee, WI65 miles$600 – $6,200$3,400−3%
Racine, WI65 miles$580 – $5,950$3,250−7%
Wisconsin (statewide)$590 – $6,000$3,300−6%
United States$600 – $6,000$3,300−6%

Out of the 300 metros we cover, Janesville ranks #45 for the cost of this job (#1 is the most expensive). Statewide, Janesville is 6% above the Wisconsin figure.

Elsewhere in Wisconsin

Wisconsin metros compared with Janesville
MetroSizeRangeMidpointvs. here
Milwaukee, WI820,780 jobs$600 – $6,200$3,400−3%
Madison, WI408,070 jobs$610 – $6,350$3,500level
Green Bay, WI174,550 jobs$580 – $5,950$3,250−7%
Appleton, WI124,230 jobs$590 – $6,000$3,300−6%
Oshkosh, WI93,750 jobs$630 – $6,650$3,650+4%
Eau Claire, WI86,060 jobs$580 – $5,900$3,250−8%

Metros of a similar size

Big cities and small ones price differently, so here is Janesville against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Lexington Park, MD70,650 jobs$610 – $6,100$3,350−4%
Wausau, WI69,530 jobs$560 – $5,600$3,100−12%
Bismarck, ND71,270 jobs$580 – $5,750$3,150−9%
Yuma, AZ68,880 jobs$560 – $5,450$3,000−14%

What local crews earn in Janesville

The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Janesville the blend is 1.19.

Carpenters (47-2031), 60% of the weighting: a median of $36.24 an hour, 24% above the US median of $29.12. The middle half of them earn between $23.92 and $39.98 an hour. About 360 work in the metro. That is 51.5 per 10,000 jobs, compared with 43.1 nationally, which suggests plenty of local crews to bid.

Glaziers (47-2121) carry 30% of the labor weighting. BLS does not publish this trade for the Janesville metro, so we used the Wisconsin statewide median: $30.00 an hour against $27.44 for the US. The middle half of them earn between $24.52 and $44.10 an hour.

For general maintenance and repair workers (49-9071, weighted 10%) the local median is $27.21 an hour, which is 14% above the national $23.84. The middle half of them earn between $22.04 and $30.04 an hour. BLS counts 770 of them working in the area, 110.2 for every 10,000 jobs (US: 98.4), so the local bench is about average.

A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $120 to the midpoint estimate; the 25th percentile takes off about $410. That is a swing of roughly 11.6% to 3.5% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.

Janesville-Beloit has 69,870 jobs in total (BLS, May 2025), ranking 260th by size among the 300 metros on this site.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Carpenters (47-2031)60%$23.92$36.24$39.98$29.121.24metro
Glaziers (47-2121)30%$24.52$30.00$44.10$27.441.09state
General maintenance and repair workers (49-9071)10%$22.04$27.21$30.04$23.841.14metro
Blended100%1.19

Specs and site conditions that change a Janesville bid

  • New opening versus replacement

    Cutting a new opening in a wall adds framing, header and finish work compared with a like-for-like swap.

  • Old door removal

    Removing and disposing of the old door is $100-$500 extra.

  • Glass

    Low-E, tempered and hurricane-rated glass cost more than basic single-pane glass.

Pick a size, pick a tier: patio door pricing in Janesville

The cited range is split into basic, standard and premium bands, then scaled to Janesville. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from one sliding door to two doors.

Basic

$610 to $2,900

Standard vinyl slider, same opening

Standard

$2,350 to $4,650

Wider slider or French door with better glass

Premium

$4,050 to $6,400

Multi-panel or custom door, new opening

Cost by size and quality level
SizeBasicStandardPremium
one sliding door$610 – $2,900$2,350 – $4,650$4,050 – $6,400
two doors$1,250 – $5,850$4,700 – $9,300$8,150 – $12,800

Related projects, priced for Janesville

Jobs that often go together with patio door are priced below at their usual sizes, using the same Janesville wage and price inputs. Compared with national midpoints, wood deck comes out highest (+7%) and window replacement lowest (level); the gap comes from the trades each job uses.

Related projects with local prices
ProjectSizeRangevs. US
Window replacement10 windows$4,550 – $14,900level
Front door1 door$560 – $2,500+2%
Storm door1 door$380 – $990+5%
Wood deck300 sq ft$8,050 – $16,100+7%
Garage door1 door$750 – $3,750+3%

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,350 to $4,650 for Janesville, WI is attached.

A detailed PDF report of this estimate, $9

The report lays out the patio door numbers for Janesville, WI line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Patio door in Janesville: your questions

+How much does it cost to install a patio door in Janesville?

For 1 door, expect $610 to $6,400 in the Janesville area. A standard-spec job lands at $2,350 to $4,650. Small jobs usually cost more per door and large ones less.

+What is the price per door for patio door in Janesville?

About $613 to $6,380 per door for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $600 to $6,000.

+Is patio door cheaper in Janesville or Rockford?

Rockford is 25 miles away. The midpoint for 1 door there is $3,450, which is 2% less than Janesville ($3,500). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Janesville?

About 54% at the midpoint, or $1,900 out of $3,500. Materials are 46% and permits 0%. Nationally, labor is 48%.

+What would two doors cost in Janesville?

$1,250 to $12,800. Pick a different size in the estimator above to get your own number.

+Does patio door need a permit in Janesville?

Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Janesville area (our national range of $0 to $0 scaled by the local price level).

+Is Janesville expensive for patio door compared with the rest of Wisconsin?

Janesville is 6% above the Wisconsin statewide estimate ($3,300 at the midpoint). We cover 12 metros in Wisconsin; see the state page to compare them.

+What do carpenters earn in Janesville?

The BLS median is $36.24 an hour in the Janesville area, compared with $29.12 nationally. The 25th to 75th percentile range is $23.92 to $39.98.

+What do basic and premium patio door work cost in Janesville?

For 1 door, basic work runs $610 to $2,900 and premium work $4,050 to $6,400. Basic means: standard vinyl slider, same opening. Premium means: multi-panel or custom door, new opening.

+When is the best time to install a patio door in Janesville?

Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through November. March and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.

Patio door near Janesville

Patio door: all pricesPatio door in WisconsinAll projects in JanesvilleWisconsin cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = HomeGuide's $400-$3,000 for the sliding door itself, matched to the lower part of the $600-$6,000 installed range; labor is the remainder and sits above HomeGuide's $200-$1,000 labor-only figure because the installed range also covers trim, flashing and haul-away.