Skip to content
CostLocal

Patio door cost in South Carolina

Statewide estimate from BLS wages and BEA prices. Reviewed Nov 4, 2026.

Statewide range (1 door)
$560 – $5,500
Per door
$558 – $5,484
before permit
Versus US midpoint
−8%
US $3,300
Metros covered
7

South Carolina prices for patio door: $560 to $5,500 for 1 door, or $558 to $5,484 per door without the permit. The state midpoint is 8% below the national one. Local wages for carpenters are $24.36 an hour.

Inside South Carolina, the metros we cover range from $2,900 (Myrtle Beach) to $3,050 (Spartanburg) at the midpoint. Pick your closest city in the table for a tighter number.

Estimate your patio door cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Wider slider or French door with better glass

Estimated cost for 1 door in South Carolina (statewide), standard level

$2,050 to $4,000

About $2,036 to $4,006 per door before permits. Labor is about 46% of the bill.

Cost breakdown
PartLowHigh
Materials$1,150$2,150
Labor$900$1,850
Permits and fees$0$0
Total$2,050$4,000
Save and get a PDF report

Cost breakdown for 1 door in South Carolina

Part of the jobLowMidpointHighShare
Materials$390$1,650$2,90054%
Labor$170$1,400$2,60046%
Permits and fees$0$0$00%
Total$560$3,000$5,500100%

Patio door: what moves the price in South Carolina

  • Door type

    Sliding glass doors run $1,200-$4,000 installed; exterior French doors $1,300-$5,500; telescoping doors $1,500-$5,000 (HomeGuide).

  • New opening versus replacement

    Cutting a new opening in a wall adds framing, header and finish work compared with a like-for-like swap.

  • Old door removal

    Removing and disposing of the old door is $100-$500 extra.

  • Glass

    Low-E, tempered and hurricane-rated glass cost more than basic single-pane glass.

Related projects, priced for South Carolina

The table prices neighboring jobs at their usual sizes using statewide South Carolina wages and prices. Against national midpoints, window replacement comes out highest (−6%) and wood deck lowest (−9%), because each job leans on different trades.

Related projects with local prices
ProjectSizeRangevs. US
Window replacement10 windows$4,200 – $14,100−6%
Front door1 door$450 – $2,350−7%
Storm door1 door$320 – $880−8%
Wood deck300 sq ft$6,900 – $13,900−9%
Garage door1 door$650 – $3,500−6%

Patio door cost by metro in South Carolina

1 of the 7 metros sit above the statewide midpoint of $3,000, and the top-to-bottom gap is 5%. Each row prices the default size with that metro's own BLS wages and BEA price levels, so the gap between rows is real local variation rather than a flat markup.

MetroRange (1 door)Midpointvs. state
Spartanburg, SC$560 – $5,550$3,050+1%
Hilton Head, SC$560 – $5,500$3,050level
Greenville, SC$560 – $5,500$3,050level
Charleston, SC$560 – $5,500$3,000level
Florence, SC$550 – $5,400$3,000−1%
Columbia, SC$550 – $5,400$3,000−1%
Myrtle Beach, SC$540 – $5,250$2,900−4%

South Carolina seasons and patio door

Season matters for patio door. For each South Carolina metro below we took NOAA's 1991-2020 monthly normals from the nearest suitable station and counted comfortable months for exterior installation.

Charleston has the longest comfortable season of the metros we cover in South Carolina at 12 months; Columbia has the shortest at 9 (September through May). Rainfall runs from 44 inches a year in Columbia to 54 inches in Myrtle Beach.

We do not adjust prices by month, because we have no reliable published data on seasonal pricing. Timing is still worth raising when you collect bids.

Climate by metro (NOAA 1991-2020 normals)
MetroJan avg low °FJul avg high °FPrecip (in/yr)Comfortable months
Greenville35914711: August through June
Columbia3793449: September through May
Charleston44884412: all year
Spartanburg32905011: August through June
Myrtle Beach34875412: all year
Florence36924510: September through June
Hilton Head40924510: September through June

South Carolina against its neighbors

South Carolina ranks 38 of 51 (the 50 states plus DC) for patio door, where 1 is the most expensive. The costliest is Hawaii at $4,100 and the cheapest Oklahoma at $2,850, both for 1 door at the midpoint. South Carolina sits at $3,000. The five states closest by workforce center are listed below.

States near South Carolina, same project and size
StateDistanceRangeMidpointvs. here
North Carolina120 miles away$550 – $5,400$2,950−2%
Georgia180 miles away$560 – $5,400$3,000−1%
Virginia300 miles away$590 – $5,900$3,250+7%
West Virginia340 miles away$550 – $5,350$2,950−2%
Tennessee350 miles away$560 – $5,450$3,000−1%

Quality levels and sizes in South Carolina

The cited range is cut into three overlapping bands (basic, standard and premium) and scaled to statewide South Carolina wages and prices. The grid prices the same bands at 2 common sizes.

Basic

$560 to $2,550

Standard vinyl slider, same opening

Standard

$2,050 to $4,000

Wider slider or French door with better glass

Premium

$3,500 to $5,500

Multi-panel or custom door, new opening

Cost by size and quality level
SizeBasicStandardPremium
one sliding door$560 – $2,550$2,050 – $4,000$3,500 – $5,500
two doors$1,100 – $5,050$4,050 – $8,000$7,050 – $11,000

What carpenters and the other trades earn in South Carolina

Statewide wages come from BLS's state-level estimates, which blend big cities with small towns and rural areas. 3 trades drive the labor line for this job, and the weighted ratio against the national wage level is 0.86 for South Carolina.

For carpenters (47-2031, weighted 60%) the local median is $24.36 an hour, which is 16% below the national $29.12. The middle half of them earn between $20.97 and $30.10 an hour. BLS counts 6,950 of them working in the state, 30.2 for every 10,000 jobs (US: 43.1), so the local bench is thinner than average.

For glaziers (47-2121, weighted 30%) the local median is $24.35 an hour, which is 11% below the national $27.44. The middle half of them earn between $21.50 and $27.82 an hour. BLS counts 740 of them working in the state, 3.2 for every 10,000 jobs (US: 3.8), so the local bench is about average.

General maintenance and repair workers (49-9071), 10% of the weighting: a median of $23.02 an hour, 3% below the US median of $23.84. The middle half of them earn between $18.61 and $29.31 an hour. About 28,020 work in the state. That is 121.6 per 10,000 jobs, compared with 98.4 nationally, which suggests plenty of local crews to bid.

A crew paid at the 75th percentile for carpenters ($30.10 an hour) would add about $190 to the statewide midpoint; one at the 25th percentile ($20.97) would take off about $110. Use that as a rough guide to how far a bid can sit from our midpoint on wages alone.

BLS counts 2,305,080 jobs across South Carolina (May 2025), which is 1.5% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Carpenters (47-2031)60%$20.97$24.36$30.10$29.120.84state
Glaziers (47-2121)30%$21.50$24.35$27.82$27.440.89state
General maintenance and repair workers (49-9071)10%$18.61$23.02$29.31$23.840.97state
Blended100%0.86

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,050 to $4,000 for South Carolina is attached.

A detailed PDF report of this estimate, $9

The report lays out the patio door numbers for South Carolina line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Patio door in South Carolina: your questions

+How much does it cost to install a patio door in South Carolina?

$560 to $5,500 for 1 door, using statewide wages and prices. Metro areas inside South Carolina can sit above or below that.

+Which city in South Carolina is cheapest for patio door?

Myrtle Beach at about $2,900 (midpoint, 1 door). The priciest is Spartanburg at $3,050.

+Is patio door cheaper in South Carolina than the US average?

It is 8% cheaper: $3,000 against $3,300 for 1 door at the midpoint.

+What share of the price is labor in South Carolina?

About 46% ($1,400). Materials are 54%. Statewide labor for this job is weighted 0.86x the national wage level.

+What do carpenters earn in South Carolina?

The BLS statewide median is $24.36 an hour, against $29.12 for the US. The 25th to 75th percentile range is $20.97 to $30.10.

+Where does South Carolina rank for patio door costs?

38th most expensive of 51 (the 50 states plus DC) at the midpoint, $3,000 for 1 door. Rank 1 is the costliest.

+What do basic and premium patio door work cost in South Carolina?

For 1 door, basic work runs $560 to $2,550 and premium work $3,500 to $5,500. Basic means: standard vinyl slider, same opening. Premium means: multi-panel or custom door, new opening.

+Does the season matter for patio door in South Carolina?

Yes where winters or summers are hard. Of the South Carolina metros we cover, Charleston has the most comfortable months (12 of 12) based on NOAA 1991-2020 normals. Our prices do not change by month, so ask contractors whether they charge more or less in busy and slow seasons.

Patio door by city in South Carolina

Patio door: all pricesSouth Carolina cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = HomeGuide's $400-$3,000 for the sliding door itself, matched to the lower part of the $600-$6,000 installed range; labor is the remainder and sits above HomeGuide's $200-$1,000 labor-only figure because the installed range also covers trim, flashing and haul-away.