Patio door cost in Fargo, ND
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (1 door)
- $590 – $5,950
- Per door
- $587 – $5,941
- before permit
- Versus US midpoint
- −1%
- US $3,300
- Rank of 300 metros
- #99
- 1 = most expensive
Local price for a patio door in the Fargo area: $590 to $5,950 for 1 door. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint lands close to the US figure. Building materials run about 4% below the US average here (BEA goods price index 95.7).
Estimate your patio door cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 1 door in Fargo, ND, standard level
$2,200 to $4,350
About $2,194 to $4,335 per door before permits. Labor is about 50% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,150 | $2,100 |
| Labor | $1,050 | $2,200 |
| Permits and fees | $0 | $0 |
| Total | $2,200 | $4,350 |
Cost breakdown for 1 door in Fargo, ND
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $380 | $1,650 | $2,850 | 50% |
| Labor | $200 | $1,650 | $3,050 | 50% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $590 | $3,250 | $5,950 | 100% |
What is behind the Fargo number
The wage side of the estimate leans on carpenters, who do 60% of the hours on a typical job. Their local median is $28.34 an hour. Add the other trades involved and the blended wage index for Fargo is 1.02 (US = 1.00), which puts labor at 50% of the total.
Materials are scaled with BEA's regional price parity for goods. Fargo is at 95.7 against 100 for the US, so a materials line of $1,700 nationally becomes $1,650 here (midpoint, 1 door). Permits follow the all-items index of 90.9: $0 to $0.
The best months for patio door in Fargo
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Fargo Hector Intl Ap (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Fargo are April through October: 7 of 12. Outside them, January, February, March, November and December have an average daytime high under 45°F.
In January, February, March, November and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Fargo gets about 24 inches of precipitation in a normal year, including roughly 51 inches of snow. The wettest months are May, June and July (4.3 inches in June). Inside the workable window, April and October are the driest, at 1.5 and 2.2 inches. The station averages about 11 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 18 | 0 | 0.7 | Cold |
| Feb | 23 | 4 | 0.7 | Cold |
| Mar | 36 | 18 | 1.3 | Cold |
| Apr | 54 | 32 | 1.5 | Workable |
| May | 69 | 44 | 3.1 | Workable |
| Jun | 78 | 56 | 4.3 | Workable |
| Jul | 82 | 59 | 3.1 | Workable |
| Aug | 81 | 57 | 2.6 | Workable |
| Sep | 72 | 48 | 2.7 | Workable |
| Oct | 56 | 35 | 2.2 | Workable |
| Nov | 38 | 21 | 1.0 | Cold |
| Dec | 24 | 8 | 0.9 | Cold |
Planning more than one job in Fargo?
Jobs that often go together with patio door are priced below at their usual sizes, using the same Fargo wage and price inputs. Compared with national midpoints, window replacement comes out highest (−2%) and front door lowest (−4%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Window replacement | 10 windows | $4,450 – $14,700 | −2% |
| Front door | 1 door | $490 – $2,400 | −4% |
| Storm door | 1 door | $340 – $920 | −3% |
| Wood deck | 300 sq ft | $7,300 – $14,700 | −3% |
| Garage door | 1 door | $690 – $3,600 | −2% |
Patio door: what moves the price in Fargo
New opening versus replacement
Cutting a new opening in a wall adds framing, header and finish work compared with a like-for-like swap.
Old door removal
Removing and disposing of the old door is $100-$500 extra.
Glass
Low-E, tempered and hurricane-rated glass cost more than basic single-pane glass.
Cost by quality level and size in Fargo
The cited range is split into basic, standard and premium bands, then scaled to Fargo. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from one sliding door to two doors.
Basic
$590 to $2,750
Standard vinyl slider, same opening
Standard
$2,200 to $4,350
Wider slider or French door with better glass
Premium
$3,800 to $5,950
Multi-panel or custom door, new opening
| Size | Basic | Standard | Premium |
|---|---|---|---|
| one sliding door | $590 – $2,750 | $2,200 – $4,350 | $3,800 – $5,950 |
| two doors | $1,150 – $5,450 | $4,400 – $8,650 | $7,600 – $11,900 |
Who does the work: Fargo trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Fargo the blend is 1.02.
Carpenters (47-2031), 60% of the weighting: a median of $28.34 an hour, in line with the US median of $29.12. The middle half of them earn between $23.34 and $31.06 an hour. About 880 work in the metro. That is 59.2 per 10,000 jobs, compared with 43.1 nationally, which suggests plenty of local crews to bid.
Glaziers (47-2121), 30% of the weighting: a median of $30.64 an hour, 12% above the US median of $27.44. The middle half of them earn between $28.78 and $30.64 an hour. About 40 work in the metro. That is 2.7 per 10,000 jobs, compared with 3.8 nationally, so expect fewer local crews to bid.
For general maintenance and repair workers (49-9071, weighted 10%) the local median is $25.02 an hour, which is 5% above the national $23.84. The middle half of them earn between $22.26 and $29.33 an hour. BLS counts 1,040 of them working in the area, 70.0 for every 10,000 jobs (US: 98.4), so the local bench is thinner than average.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $90 to the midpoint estimate; the 25th percentile takes off about $160. That is a swing of roughly 5.0% to 2.7% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Fargo has 148,660 jobs in total (BLS, May 2025), ranking 156th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 60% | $23.34 | $28.34 | $31.06 | $29.12 | 0.97 | metro |
| Glaziers (47-2121) | 30% | $28.78 | $30.64 | $30.64 | $27.44 | 1.12 | metro |
| General maintenance and repair workers (49-9071) | 10% | $22.26 | $25.02 | $29.33 | $23.84 | 1.05 | metro |
| Blended | 100% | 1.02 | |||||
Fargo against nearby metros and the rest of North Dakota
Of the five closest metros, 2 are cheaper than Fargo. Sioux Falls is the lowest at about $2,950 (midpoint, 1 door), 235 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Fargo, NDthis page | $590 – $5,950 | $3,250 | |
| St. Cloud, MN150 miles | $590 – $6,050 | $3,300 | +2% |
| Bismarck, ND190 miles | $580 – $5,750 | $3,150 | −3% |
| Minneapolis, MN215 miles | $660 – $6,750 | $3,700 | +13% |
| Duluth, MN215 miles | $590 – $6,050 | $3,350 | +2% |
| Sioux Falls, SD235 miles | $550 – $5,350 | $2,950 | −9% |
| North Dakota (statewide) | $580 – $5,850 | $3,200 | −1% |
| United States | $600 – $6,000 | $3,300 | +1% |
Out of the 300 metros we cover, Fargo ranks #99 for the cost of this job (#1 is the most expensive). Statewide, Fargo is 1% above the North Dakota figure.
Elsewhere in North Dakota
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Bismarck, ND | 71,270 jobs | $580 – $5,750 | $3,150 | −3% |
Metros of a similar size
Big cities and small ones price differently, so here is Fargo against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Killeen, TX | 150,580 jobs | $540 – $5,200 | $2,900 | −12% |
| Myrtle Beach, SC | 146,260 jobs | $540 – $5,250 | $2,900 | −11% |
| Gainesville, FL | 152,670 jobs | $550 – $5,350 | $2,950 | −10% |
| Vallejo, CA | 144,130 jobs | $670 – $6,800 | $3,750 | +15% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,200 to $4,350 for Fargo, ND is attached.
A detailed PDF report of this estimate, $9
The report lays out the patio door numbers for Fargo, ND line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Patio door in Fargo: your questions
+How much does it cost to install a patio door in Fargo?
For 1 door, expect $590 to $5,950 in the Fargo area. A standard-spec job lands at $2,200 to $4,350. Small jobs usually cost more per door and large ones less.
+What is the price per door for patio door in Fargo?
About $587 to $5,941 per door for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $600 to $6,000.
+Is patio door cheaper in Fargo or St. Cloud?
St. Cloud is 150 miles away. The midpoint for 1 door there is $3,300, which is 2% more than Fargo ($3,250). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Fargo?
About 50% at the midpoint, or $1,650 out of $3,250. Materials are 50% and permits 0%. Nationally, labor is 48%.
+What would two doors cost in Fargo?
$1,150 to $11,900. Pick a different size in the estimator above to get your own number.
+Does patio door need a permit in Fargo?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Fargo area (our national range of $0 to $0 scaled by the local price level).
+Is Fargo expensive for patio door compared with the rest of North Dakota?
Fargo is 1% above the North Dakota statewide estimate ($3,200 at the midpoint). We cover 2 metros in North Dakota; see the state page to compare them.
+What do carpenters earn in Fargo?
The BLS median is $28.34 an hour in the Fargo area, compared with $29.12 nationally. The 25th to 75th percentile range is $23.34 to $31.06.
+What do basic and premium patio door work cost in Fargo?
For 1 door, basic work runs $590 to $2,750 and premium work $3,800 to $5,950. Basic means: standard vinyl slider, same opening. Premium means: multi-panel or custom door, new opening.
+When is the best time to install a patio door in Fargo?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are April through October. April and October are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Patio door near Fargo
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does It Cost to Install or Replace Patio Doors? (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = HomeGuide's $400-$3,000 for the sliding door itself, matched to the lower part of the $600-$6,000 installed range; labor is the remainder and sits above HomeGuide's $200-$1,000 labor-only figure because the installed range also covers trim, flashing and haul-away.