Patio door cost in Gulfport, MS
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (1 door)
- $540 – $5,250
- Per door
- $541 – $5,233
- before permit
- Versus US midpoint
- −13%
- US $3,300
- Rank of 300 metros
- #268
- 1 = most expensive
Local price for a patio door in the Gulfport area: $540 to $5,250 for 1 door. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 13% lower than the US figure. Carpenters earn a median of $23.78 an hour in the Gulfport area, 18% below the US median of $29.12.
Estimate your patio door cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 1 door in Gulfport, MS, standard level
$1,950 to $3,850
About $1,949 to $3,825 per door before permits. Labor is about 43% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,150 | $2,150 |
| Labor | $810 | $1,700 |
| Permits and fees | $0 | $0 |
| Total | $1,950 | $3,850 |
Cost breakdown for 1 door in Gulfport, MS
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $380 | $1,650 | $2,900 | 57% |
| Labor | $160 | $1,250 | $2,350 | 43% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $540 | $2,900 | $5,250 | 100% |
Why Gulfport prices look the way they do
The wage side of the estimate leans on carpenters, who do 60% of the hours on a typical job. Their local median is $23.78 an hour. Add the other trades involved and the blended wage index for Gulfport is 0.78 (US = 1.00), which puts labor at 43% of the total.
Materials are scaled with BEA's regional price parity for goods. Gulfport is at 96.2 against 100 for the US, so a materials line of $1,700 nationally becomes $1,650 here (midpoint, 1 door). Permits follow the all-items index of 90.0: $0 to $0.
Specs and site conditions that change a Gulfport bid
Glass
Low-E, tempered and hurricane-rated glass cost more than basic single-pane glass.
Door type
Sliding glass doors run $1,200-$4,000 installed; exterior French doors $1,300-$5,500; telescoping doors $1,500-$5,000 (HomeGuide).
New opening versus replacement
Cutting a new opening in a wall adds framing, header and finish work compared with a like-for-like swap.
What nearby projects cost in Gulfport
Jobs that often go together with patio door are priced below at their usual sizes, using the same Gulfport wage and price inputs. Compared with national midpoints, garage door comes out highest (−7%) and wood deck lowest (−10%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Window replacement | 10 windows | $4,000 – $13,600 | −10% |
| Front door | 1 door | $440 – $2,350 | −7% |
| Storm door | 1 door | $320 – $870 | −9% |
| Wood deck | 300 sq ft | $6,800 – $13,600 | −10% |
| Garage door | 1 door | $650 – $3,450 | −7% |
Who does the work: Gulfport trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Gulfport the blend is 0.78.
Carpenters (47-2031), 60% of the weighting: a median of $23.78 an hour, 18% below the US median of $29.12. The middle half of them earn between $21.51 and $25.23 an hour. About 530 work in the metro. That is 33.5 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.
Glaziers (47-2121), 30% of the weighting: a median of $18.18 an hour, 34% below the US median of $27.44. The middle half of them earn between $17.67 and $22.12 an hour. About 120 work in the metro. That is 7.6 per 10,000 jobs, compared with 3.8 nationally, which suggests plenty of local crews to bid.
For general maintenance and repair workers (49-9071, weighted 10%) the local median is $22.23 an hour, which is 7% below the national $23.84. The middle half of them earn between $17.20 and $28.57 an hour. BLS counts 1,890 of them working in the area, 119.4 for every 10,000 jobs (US: 98.4), so the local bench is deeper than average.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $50 to the midpoint estimate; the 25th percentile takes off about $75. That is a swing of roughly 2.6% to 1.7% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Gulfport-Biloxi has 158,310 jobs in total (BLS, May 2025), ranking 149th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 60% | $21.51 | $23.78 | $25.23 | $29.12 | 0.82 | metro |
| Glaziers (47-2121) | 30% | $17.67 | $18.18 | $22.12 | $27.44 | 0.66 | metro |
| General maintenance and repair workers (49-9071) | 10% | $17.20 | $22.23 | $28.57 | $23.84 | 0.93 | metro |
| Blended | 100% | 0.78 | |||||
Is Gulfport cheap or dear? The local comparison
Same job, same size (1 door), priced for the nearest metros. New Orleans is the priciest of the group at $2,950. Hattiesburg is the cheapest at $2,850.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Gulfport, MSthis page | $540 – $5,250 | $2,900 | |
| Mobile, AL50 miles | $550 – $5,300 | $2,900 | +1% |
| Hattiesburg, MS50 miles | $530 – $5,150 | $2,850 | −2% |
| Slidell, LA55 miles | $540 – $5,250 | $2,900 | level |
| Daphne, AL75 miles | $540 – $5,250 | $2,900 | level |
| New Orleans, LA90 miles | $540 – $5,350 | $2,950 | +2% |
| Mississippi (statewide) | $540 – $5,200 | $2,850 | −1% |
| United States | $600 – $6,000 | $3,300 | +14% |
Out of the 300 metros we cover, Gulfport ranks #268 for the cost of this job (#1 is the most expensive). Statewide, Gulfport is 1% above the Mississippi figure.
Elsewhere in Mississippi
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Jackson, MS | 270,730 jobs | $540 – $5,200 | $2,850 | −1% |
| Hattiesburg, MS | 62,230 jobs | $530 – $5,150 | $2,850 | −2% |
Metros of a similar size
Big cities and small ones price differently, so here is Gulfport against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Youngstown, OH | 160,160 jobs | $570 – $5,700 | $3,150 | +9% |
| Eugene, OR | 157,710 jobs | $640 – $6,450 | $3,550 | +22% |
| Waterbury, CT | 160,710 jobs | $600 – $6,050 | $3,350 | +16% |
| Brownsville, TX | 157,450 jobs | $510 – $4,850 | $2,700 | −7% |
Gulfport: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Gulfport. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from one sliding door to two doors.
Basic
$540 to $2,400
Standard vinyl slider, same opening
Standard
$1,950 to $3,850
Wider slider or French door with better glass
Premium
$3,350 to $5,250
Multi-panel or custom door, new opening
| Size | Basic | Standard | Premium |
|---|---|---|---|
| one sliding door | $540 – $2,400 | $1,950 – $3,850 | $3,350 – $5,250 |
| two doors | $1,100 – $4,850 | $3,900 – $7,650 | $6,700 – $10,500 |
The best months for patio door in Gulfport
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Gulfport - Biloxi Ap (in the city). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Gulfport are September through June: 10 of 12. Outside them, July and August have an average daytime high of 90°F or more.
Gulfport gets about 63 inches of precipitation in a normal year. The wettest months are June, July and August (7.2 inches in July). Inside the workable window, October and November are the driest, at 3.7 and 4.0 inches. The station averages about 69 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 61 | 42 | 4.9 | Workable |
| Feb | 65 | 46 | 4.4 | Workable |
| Mar | 70 | 52 | 5.2 | Workable |
| Apr | 77 | 58 | 5.5 | Workable |
| May | 84 | 66 | 4.7 | Workable |
| Jun | 89 | 73 | 6.9 | Workable |
| Jul | 90 | 75 | 7.2 | Hot |
| Aug | 91 | 75 | 6.5 | Hot |
| Sep | 88 | 71 | 5.2 | Workable |
| Oct | 80 | 60 | 3.7 | Workable |
| Nov | 70 | 49 | 4.0 | Workable |
| Dec | 64 | 45 | 4.5 | Workable |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $1,950 to $3,850 for Gulfport, MS is attached.
Take this estimate with you: PDF report, $9
The report lays out the patio door numbers for Gulfport, MS line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Patio door in Gulfport: your questions
+How much does it cost to install a patio door in Gulfport?
For 1 door, expect $540 to $5,250 in the Gulfport area. A standard-spec job lands at $1,950 to $3,850. Small jobs usually cost more per door and large ones less.
+What is the price per door for patio door in Gulfport?
About $541 to $5,233 per door for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $600 to $6,000.
+Is patio door cheaper in Gulfport or Mobile?
Mobile is 50 miles away. The midpoint for 1 door there is $2,900, which is 1% more than Gulfport ($2,900). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Gulfport?
About 43% at the midpoint, or $1,250 out of $2,900. Materials are 57% and permits 0%. Nationally, labor is 48%.
+What would two doors cost in Gulfport?
$1,100 to $10,500. Pick a different size in the estimator above to get your own number.
+Does patio door need a permit in Gulfport?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Gulfport area (our national range of $0 to $0 scaled by the local price level).
+Is Gulfport expensive for patio door compared with the rest of Mississippi?
Gulfport is 1% above the Mississippi statewide estimate ($2,850 at the midpoint). We cover 3 metros in Mississippi; see the state page to compare them.
+What do carpenters earn in Gulfport?
The BLS median is $23.78 an hour in the Gulfport area, compared with $29.12 nationally. The 25th to 75th percentile range is $21.51 to $25.23.
+What do basic and premium patio door work cost in Gulfport?
For 1 door, basic work runs $540 to $2,400 and premium work $3,350 to $5,250. Basic means: standard vinyl slider, same opening. Premium means: multi-panel or custom door, new opening.
+When is the best time to install a patio door in Gulfport?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are September through June. October and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Patio door near Gulfport
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does It Cost to Install or Replace Patio Doors? (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = HomeGuide's $400-$3,000 for the sliding door itself, matched to the lower part of the $600-$6,000 installed range; labor is the remainder and sits above HomeGuide's $200-$1,000 labor-only figure because the installed range also covers trim, flashing and haul-away.