Skip to content
CostLocal

Patio door cost in Rochester, MN

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (1 door)
$600 – $6,100
Per door
$599 – $6,123
before permit
Versus US midpoint
+2%
US $3,300
Rank of 300 metros
#71
1 = most expensive

Rochester homeowners pay roughly $600 to $6,100 to install a patio door at 1 door, or $599 to $6,123 per door (permit not included). Against the US midpoint, Rochester is almost level. Carpenters earn a median of $30.58 an hour in the Rochester area, 5% above the US median of $29.12.

Estimate your patio door cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Wider slider or French door with better glass

Estimated cost for 1 door in Rochester, MN, standard level

$2,250 to $4,450

About $2,256 to $4,466 per door before permits. Labor is about 52% of the bill.

Cost breakdown
PartLowHigh
Materials$1,150$2,100
Labor$1,150$2,350
Permits and fees$0$0
Total$2,250$4,450
Save and get a PDF report

Cost breakdown for 1 door in Rochester, MN

Part of the jobLowMidpointHighShare
Materials$380$1,600$2,85048%
Labor$220$1,750$3,25052%
Permits and fees$0$0$00%
Total$600$3,350$6,100100%

Why Rochester prices look the way they do

We price the labor side from BLS wage data for 3 trades: carpenters at 60%, glaziers at 30%, general maintenance and repair workers at 10%. Weighted together, Rochester wages are 1.09 times the national level. Labor makes up about 52% of the midpoint estimate (48% at national prices).

On the materials line, the BEA goods price index for the Rochester metro is 95.4 (US = 100). The midpoint materials bill for 1 door comes to $1,600, compared with $1,700 at national prices. Permit and inspection fees are scaled by the broader index (90.8) and land at $0 to $0.

Data note: 30% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Rochester. The wage table below marks each row.

Local wages behind the labor line

Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Rochester is 1.09 times the national level.

For carpenters (47-2031, weighted 60%) the local median is $30.58 an hour, which is 5% above the national $29.12. The middle half of them earn between $23.59 and $38.84 an hour. BLS counts 460 of them working in the area, 37.4 for every 10,000 jobs (US: 43.1), so the local bench is about average.

Glaziers (47-2121) carry 30% of the labor weighting. BLS does not publish this trade for the Rochester metro, so we used the Minnesota statewide median: $31.79 an hour against $27.44 for the US. The middle half of them earn between $29.62 and $44.20 an hour.

General maintenance and repair workers (49-9071), 10% of the weighting: a median of $25.99 an hour, 9% above the US median of $23.84. The middle half of them earn between $21.67 and $30.35 an hour. About 940 work in the metro. That is 76.4 per 10,000 jobs, compared with 98.4 nationally, so expect fewer local crews to bid.

Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($38.84 an hour) instead of the median, the labor line grows by about $270. At the 25th percentile ($23.59) it shrinks by about $230. The total moves by 8.1% or 6.9%, so wages alone rarely explain a quote that is far outside our range.

For context on the local economy, BLS counts 122,980 jobs in the Rochester area. That makes it the 176th largest of the 300 metros we cover, with 0.08% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Carpenters (47-2031)60%$23.59$30.58$38.84$29.121.05metro
Glaziers (47-2121)30%$29.62$31.79$44.20$27.441.16state
General maintenance and repair workers (49-9071)10%$21.67$25.99$30.35$23.841.09metro
Blended100%1.09

Specs and site conditions that change a Rochester bid

  • New opening versus replacement

    Cutting a new opening in a wall adds framing, header and finish work compared with a like-for-like swap.

  • Old door removal

    Removing and disposing of the old door is $100-$500 extra.

  • Glass

    Low-E, tempered and hurricane-rated glass cost more than basic single-pane glass.

Related projects, priced for Rochester

Because every project leans on different trades, Rochester's wage level does not move all prices equally. Against the US midpoint, wood deck runs +1% and front door −2%.

Related projects with local prices
ProjectSizeRangevs. US
Window replacement10 windows$4,550 – $14,900level
Front door1 door$510 – $2,450−2%
Storm door1 door$350 – $940level
Wood deck300 sq ft$7,650 – $15,400+1%
Garage door1 door$710 – $3,650level

Rochester against nearby metros and the rest of Minnesota

Of the five closest metros, 4 are cheaper than Rochester. Waterloo is the lowest at about $3,150 (midpoint, 1 door), 100 miles away.

Comparison with nearby areas
AreaRangeMidpointvs. here
Rochester, MNthis page$600 – $6,100$3,350
La Crosse, WI65 miles$580 – $5,850$3,250−4%
Eau Claire, WI85 miles$580 – $5,900$3,250−4%
Minneapolis, MN90 miles$660 – $6,750$3,700+10%
Waterloo, IA100 miles$570 – $5,700$3,150−7%
Dubuque, IA125 miles$580 – $5,850$3,200−5%
Minnesota (statewide)$620 – $6,350$3,500+4%
United States$600 – $6,000$3,300−2%

Across 300 US metros, Rochester comes in at #71 from the top. The priciest is Honolulu, HI at $4,250; the cheapest is Laredo, TX at $2,650 (midpoints, 1 door). Statewide, Rochester is 4% below the Minnesota figure.

Other Minnesota metros

Minnesota metros compared with Rochester
MetroSizeRangeMidpointvs. here
Minneapolis, MN1,951,650 jobs$660 – $6,750$3,700+10%
Duluth, MN124,710 jobs$590 – $6,050$3,350−1%
St. Cloud, MN103,920 jobs$590 – $6,050$3,300−1%

Cities with a workforce like Rochester's

Big cities and small ones price differently, so here is Rochester against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Amarillo, TX123,930 jobs$530 – $5,200$2,850−15%
Midland, TX122,180 jobs$570 – $5,650$3,100−7%
Appleton, WI124,230 jobs$590 – $6,000$3,300−2%
San Luis Obispo, CA122,020 jobs$660 – $6,700$3,700+10%

Pick a size, pick a tier: patio door pricing in Rochester

Three bands are cut from the same cited range and localized for Rochester wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 2 common sizes.

Basic

$600 to $2,800

Standard vinyl slider, same opening

Standard

$2,250 to $4,450

Wider slider or French door with better glass

Premium

$3,900 to $6,100

Multi-panel or custom door, new opening

Cost by size and quality level
SizeBasicStandardPremium
one sliding door$600 – $2,800$2,250 – $4,450$3,900 – $6,100
two doors$1,200 – $5,600$4,500 – $8,950$7,850 – $12,200

When to schedule patio door in Rochester

We use NOAA's 1991-2020 climate normals for Rochester Intl Ap (10 miles from the city center). These are 30-year monthly averages, not forecasts.

April through October is the stretch where exterior installation runs into the fewest weather problems in Rochester (7 of 12 months). January, February, March, November and December have an average daytime high under 45°F.

In January, February, March, November and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.

Rochester gets about 35 inches of precipitation in a normal year, including roughly 53 inches of snow. The wettest months are May, June and July (5.3 inches in June). Inside the workable window, April and October are the driest, at 3.5 and 2.4 inches. The station averages about 5 days a year at 90°F or above.

Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.

Monthly normals, Rochester Intl Ap (NOAA, 1991-2020)
MonthAvg high °FAvg low °FPrecip (in)For this job
Jan2371.0Cold
Feb27111.0Cold
Mar40232.0Cold
Apr55353.5Workable
May68474.3Workable
Jun78585.3Workable
Jul80614.2Workable
Aug78584.1Workable
Sep72503.6Workable
Oct58382.4Workable
Nov42261.8Cold
Dec28141.3Cold

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,250 to $4,450 for Rochester, MN is attached.

Take this estimate with you: PDF report, $9

The report lays out the patio door numbers for Rochester, MN line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Patio door in Rochester: your questions

+How much does it cost to install a patio door in Rochester?

For 1 door, expect $600 to $6,100 in the Rochester area. A standard-spec job lands at $2,250 to $4,450. Small jobs usually cost more per door and large ones less.

+What is the price per door for patio door in Rochester?

About $599 to $6,123 per door for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $600 to $6,000.

+Is patio door cheaper in Rochester or La Crosse?

La Crosse is 65 miles away. The midpoint for 1 door there is $3,250, which is 4% less than Rochester ($3,350). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Rochester?

About 52% at the midpoint, or $1,750 out of $3,350. Materials are 48% and permits 0%. Nationally, labor is 48%.

+What would two doors cost in Rochester?

$1,200 to $12,200. Pick a different size in the estimator above to get your own number.

+Does patio door need a permit in Rochester?

Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Rochester area (our national range of $0 to $0 scaled by the local price level).

+Is Rochester expensive for patio door compared with the rest of Minnesota?

Rochester is 4% below the Minnesota statewide estimate ($3,500 at the midpoint). We cover 4 metros in Minnesota; see the state page to compare them.

+What do carpenters earn in Rochester?

The BLS median is $30.58 an hour in the Rochester area, compared with $29.12 nationally. The 25th to 75th percentile range is $23.59 to $38.84.

+What do basic and premium patio door work cost in Rochester?

For 1 door, basic work runs $600 to $2,800 and premium work $3,900 to $6,100. Basic means: standard vinyl slider, same opening. Premium means: multi-panel or custom door, new opening.

+When is the best time to install a patio door in Rochester?

Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are April through October. April and October are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.

Patio door near Rochester

Patio door: all pricesPatio door in MinnesotaAll projects in RochesterMinnesota cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = HomeGuide's $400-$3,000 for the sliding door itself, matched to the lower part of the $600-$6,000 installed range; labor is the remainder and sits above HomeGuide's $200-$1,000 labor-only figure because the installed range also covers trim, flashing and haul-away.