Patio door cost in Riverside, CA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (1 door)
- $630 – $6,450
- Per door
- $632 – $6,432
- before permit
- Versus US midpoint
- +7%
- US $3,300
- Rank of 300 metros
- #41
- 1 = most expensive
Local price for a patio door in the Riverside area: $630 to $6,450 for 1 door. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 7% higher than the US figure. Carpenters earn a median of $34.08 an hour in the Riverside area, 17% above the US median of $29.12.
Estimate your patio door cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 1 door in Riverside, CA, standard level
$2,350 to $4,700
About $2,372 to $4,692 per door before permits. Labor is about 51% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,200 | $2,250 |
| Labor | $1,150 | $2,450 |
| Permits and fees | $0 | $0 |
| Total | $2,350 | $4,700 |
Cost breakdown for 1 door in Riverside, CA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $410 | $1,700 | $3,050 | 49% |
| Labor | $230 | $1,800 | $3,400 | 51% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $630 | $3,550 | $6,450 | 100% |
Why Riverside prices look the way they do
Labor is 51% of the midpoint bill here, against 48% nationally. The mix of trades behind this job is carpenters (60%), glaziers (30%), general maintenance and repair workers (10%). We weight each trade's local median wage by that share and compare it with the national median. In Riverside the blended ratio comes out at 1.13.
Materials are scaled with BEA's regional price parity for goods. Riverside is at 101.4 against 100 for the US, so a materials line of $1,700 nationally becomes $1,700 here (midpoint, 1 door). Permits follow the all-items index of 106.4: $0 to $0.
Patio door: what moves the price in Riverside
Glass
Low-E, tempered and hurricane-rated glass cost more than basic single-pane glass.
Door type
Sliding glass doors run $1,200-$4,000 installed; exterior French doors $1,300-$5,500; telescoping doors $1,500-$5,000 (HomeGuide).
New opening versus replacement
Cutting a new opening in a wall adds framing, header and finish work compared with a like-for-like swap.
Who does the work: Riverside trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Riverside the blend is 1.13.
Carpenters (47-2031), 60% of the weighting: a median of $34.08 an hour, 17% above the US median of $29.12. The middle half of them earn between $26.27 and $43.08 an hour. About 12,970 work in the metro. That is 75.5 per 10,000 jobs, compared with 43.1 nationally, which suggests plenty of local crews to bid.
Glaziers (47-2121), 30% of the weighting: a median of $29.21 an hour, 6% above the US median of $27.44. The middle half of them earn between $24.33 and $37.32 an hour. About 840 work in the metro. That is 4.9 per 10,000 jobs, compared with 3.8 nationally, which suggests plenty of local crews to bid.
For general maintenance and repair workers (49-9071, weighted 10%) the local median is $25.75 an hour, which is 8% above the national $23.84. The middle half of them earn between $21.50 and $32.65 an hour. BLS counts 13,720 of them working in the area, 79.9 for every 10,000 jobs (US: 98.4), so the local bench is thinner than average.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $300 to the midpoint estimate; the 25th percentile takes off about $260. That is a swing of roughly 7.3% to 8.4% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Riverside-San Bernardino-Ontario has 1,716,760 jobs in total (BLS, May 2025), ranking 16th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 60% | $26.27 | $34.08 | $43.08 | $29.12 | 1.17 | metro |
| Glaziers (47-2121) | 30% | $24.33 | $29.21 | $37.32 | $27.44 | 1.06 | metro |
| General maintenance and repair workers (49-9071) | 10% | $21.50 | $25.75 | $32.65 | $23.84 | 1.08 | metro |
| Blended | 100% | 1.13 | |||||
Riverside against nearby metros and the rest of California
Of the five closest metros, 1 is cheaper than Riverside. Las Vegas is the lowest at about $3,200 (midpoint, 1 door), 130 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Riverside, CAthis page | $630 – $6,450 | $3,550 | |
| San Diego, CA110 miles | $670 – $6,750 | $3,700 | +5% |
| El Centro, CA115 miles | $650 – $6,650 | $3,650 | +4% |
| Los Angeles, CA120 miles | $670 – $6,800 | $3,750 | +6% |
| Las Vegas, NV130 miles | $580 – $5,850 | $3,200 | −9% |
| Bakersfield, CA155 miles | $640 – $6,450 | $3,550 | level |
| California (statewide) | $670 – $6,800 | $3,750 | +6% |
| United States | $600 – $6,000 | $3,300 | −7% |
Out of the 300 metros we cover, Riverside ranks #41 for the cost of this job (#1 is the most expensive). Statewide, Riverside is 5% below the California figure.
Elsewhere in California
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Los Angeles, CA | 6,271,560 jobs | $670 – $6,800 | $3,750 | +6% |
| San Francisco, CA | 2,373,920 jobs | $710 – $7,450 | $4,100 | +16% |
| San Diego, CA | 1,538,060 jobs | $670 – $6,750 | $3,700 | +5% |
| San Jose, CA | 1,134,970 jobs | $690 – $7,200 | $3,950 | +12% |
| Sacramento, CA | 1,080,590 jobs | $660 – $6,700 | $3,700 | +4% |
| Fresno, CA | 476,890 jobs | $630 – $6,300 | $3,450 | −2% |
Metros of a similar size
Big cities and small ones price differently, so here is Riverside against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Detroit, MI | 1,904,530 jobs | $610 – $6,100 | $3,350 | −5% |
| Denver, CO | 1,609,350 jobs | $620 – $6,300 | $3,450 | −2% |
| Minneapolis, MN | 1,951,650 jobs | $660 – $6,750 | $3,700 | +5% |
| San Diego, CA | 1,538,060 jobs | $670 – $6,750 | $3,700 | +5% |
Pick a size, pick a tier: patio door pricing in Riverside
The cited range is split into basic, standard and premium bands, then scaled to Riverside. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from one sliding door to two doors.
Basic
$630 to $2,950
Standard vinyl slider, same opening
Standard
$2,350 to $4,700
Wider slider or French door with better glass
Premium
$4,100 to $6,450
Multi-panel or custom door, new opening
| Size | Basic | Standard | Premium |
|---|---|---|---|
| one sliding door | $630 – $2,950 | $2,350 – $4,700 | $4,100 – $6,450 |
| two doors | $1,250 – $5,900 | $4,750 – $9,400 | $8,200 – $12,900 |
The best months for patio door in Riverside
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Riverside Fire Stn 3 (in the city). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Riverside are October through June: 9 of 12. Outside them, July, August and September have an average daytime high of 90°F or more.
Riverside gets about 10 inches of precipitation in a normal year. The wettest months are January, February and March (2.5 inches in February). Inside the workable window, May and June are the driest, at 0.2 and 0.1 inches. The station averages about 110 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 70 | 43 | 2.2 | Workable |
| Feb | 70 | 44 | 2.5 | Workable |
| Mar | 73 | 46 | 1.6 | Workable |
| Apr | 78 | 50 | 0.6 | Workable |
| May | 81 | 55 | 0.2 | Workable |
| Jun | 89 | 59 | 0.1 | Workable |
| Jul | 95 | 64 | 0.1 | Hot |
| Aug | 97 | 65 | 0.1 | Hot |
| Sep | 93 | 62 | 0.1 | Hot |
| Oct | 84 | 55 | 0.4 | Workable |
| Nov | 76 | 47 | 0.7 | Workable |
| Dec | 69 | 42 | 1.4 | Workable |
Related projects, priced for Riverside
Jobs that often go together with patio door are priced below at their usual sizes, using the same Riverside wage and price inputs. Compared with national midpoints, wood deck comes out highest (+9%) and window replacement lowest (+4%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Window replacement | 10 windows | $4,700 – $15,600 | +4% |
| Front door | 1 door | $550 – $2,600 | +5% |
| Storm door | 1 door | $380 – $1,000 | +7% |
| Wood deck | 300 sq ft | $8,250 – $16,500 | +9% |
| Garage door | 1 door | $750 – $3,900 | +6% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,350 to $4,700 for Riverside, CA is attached.
Detailed patio door report for Riverside, CA, $9
The report lays out the patio door numbers for Riverside, CA line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Patio door in Riverside: your questions
+How much does it cost to install a patio door in Riverside?
For 1 door, expect $630 to $6,450 in the Riverside area. A standard-spec job lands at $2,350 to $4,700. Small jobs usually cost more per door and large ones less.
+What is the price per door for patio door in Riverside?
About $632 to $6,432 per door for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $600 to $6,000.
+Is patio door cheaper in Riverside or San Diego?
San Diego is 110 miles away. The midpoint for 1 door there is $3,700, which is 5% more than Riverside ($3,550). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Riverside?
About 51% at the midpoint, or $1,800 out of $3,550. Materials are 49% and permits 0%. Nationally, labor is 48%.
+What would two doors cost in Riverside?
$1,250 to $12,900. Pick a different size in the estimator above to get your own number.
+Does patio door need a permit in Riverside?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Riverside area (our national range of $0 to $0 scaled by the local price level).
+Is Riverside expensive for patio door compared with the rest of California?
Riverside is 5% below the California statewide estimate ($3,750 at the midpoint). We cover 23 metros in California; see the state page to compare them.
+What do carpenters earn in Riverside?
The BLS median is $34.08 an hour in the Riverside area, compared with $29.12 nationally. The 25th to 75th percentile range is $26.27 to $43.08.
+What do basic and premium patio door work cost in Riverside?
For 1 door, basic work runs $630 to $2,950 and premium work $4,100 to $6,450. Basic means: standard vinyl slider, same opening. Premium means: multi-panel or custom door, new opening.
+When is the best time to install a patio door in Riverside?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are October through June. May and June are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Patio door near Riverside
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does It Cost to Install or Replace Patio Doors? (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = HomeGuide's $400-$3,000 for the sliding door itself, matched to the lower part of the $600-$6,000 installed range; labor is the remainder and sits above HomeGuide's $200-$1,000 labor-only figure because the installed range also covers trim, flashing and haul-away.