Metal roof cost in Ogden, UT
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (2,000 sq ft of roof)
- $9,800 – $31,300
- Per sq ft of roof
- $4.80 – $15.50
- before permit
- Versus US midpoint
- −4%
- US $21,300
- Rank of 300 metros
- #134
- 1 = most expensive
Ogden homeowners pay roughly $9,800 to $31,300 to install a metal roof at 2,000 sq ft of roof, or $4.80 to $15.50 per sq ft of roof (permit not included). Against the US midpoint, Ogden is 4% lower. Roofers earn a median of $24.86 an hour in the Ogden area, 7% below the US median of $26.65.
Estimate your metal roof cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 2,000 sq ft of roof in Ogden, UT, standard level
$16,200 to $24,900
About $8 to $12 per sq ft of roof before permits. Labor is about 56% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $6,000 | $11,400 |
| Labor | $10,000 | $13,100 |
| Permits and fees | $260 | $400 |
| Total | $16,200 | $24,900 |
Cost breakdown for 2,000 sq ft of roof in Ogden, UT
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $1,950 | $8,700 | $15,400 | 42% |
| Labor | $7,700 | $11,600 | $15,400 | 56% |
| Permits and fees | $150 | $330 | $500 | 2% |
| Total | $9,800 | $20,600 | $31,300 | 100% |
Where the Ogden price comes from
Labor is 56% of the midpoint bill here, against 56% nationally. The mix of trades behind this job is roofers (70%), sheet metal workers (20%), construction laborers (10%). We weight each trade's local median wage by that share and compare it with the national median. In Ogden the blended ratio comes out at 0.96.
On the materials line, the BEA goods price index for the Ogden metro is 96.4 (US = 100). The midpoint materials bill for 2,000 sq ft of roof comes to $8,700, compared with $9,000 at national prices. Permit and inspection fees are scaled by the broader index (100.3) and land at $150 to $500.
When to schedule metal roof in Ogden
We use NOAA's 1991-2020 climate normals for Ogden Hinkley Ap (5 miles from the city center). These are 30-year monthly averages, not forecasts.
March through June and August through November are the stretches where exterior installation runs into the fewest weather problems in Ogden (8 of 12 months). January, February and December have an average daytime high under 45°F; July has an average daytime high of 90°F or more.
In January, February and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Ogden gets about 16 inches of precipitation in a normal year. The wettest months are March, April and May (2.2 inches in May). Inside the workable window, August and September are the driest, at 0.7 and 1.1 inches. The station averages about 49 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 36 | 21 | 1.5 | Cold |
| Feb | 42 | 25 | 1.6 | Cold |
| Mar | 53 | 33 | 1.7 | Workable |
| Apr | 60 | 39 | 2.0 | Workable |
| May | 70 | 47 | 2.2 | Workable |
| Jun | 82 | 55 | 1.1 | Workable |
| Jul | 91 | 65 | 0.3 | Hot |
| Aug | 89 | 63 | 0.7 | Workable |
| Sep | 78 | 53 | 1.1 | Workable |
| Oct | 63 | 41 | 1.7 | Workable |
| Nov | 49 | 31 | 1.2 | Workable |
| Dec | 37 | 22 | 1.3 | Cold |
Planning more than one job in Ogden?
Because every project leans on different trades, Ogden's wage level does not move all prices equally. Against the US midpoint, gutters runs −2% and attic insulation −8%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $5,800 – $11,900 | −5% |
| Gutters | 160 linear ft | $1,250 – $4,100 | −2% |
| Attic insulation | 1,000 sq ft | $900 – $3,700 | −8% |
| Vinyl siding | 2,100 sq ft of wall | $7,750 – $23,200 | −8% |
How Ogden compares
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 2,000 sq ft of roof range from $19,600 to $20,600 across Ogden and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Ogden, UTthis page | $9,800 – $31,300 | $20,600 | |
| Logan, UT55 miles | $9,150 – $30,100 | $19,600 | −5% |
| Salt Lake City, UT70 miles | $9,400 – $30,500 | $20,000 | −3% |
| Provo, UT90 miles | $9,200 – $30,200 | $19,700 | −4% |
| Idaho Falls, ID175 miles | $9,650 – $31,100 | $20,400 | −1% |
| Grand Junction, CO230 miles | $9,150 – $30,000 | $19,600 | −5% |
| Utah (statewide) | $9,400 – $30,600 | $20,000 | −3% |
| United States | $10,200 – $32,500 | $21,300 | +4% |
Across 300 US metros, Ogden comes in at #134 from the top. The priciest is Worcester, MA at $29,600; the cheapest is Lubbock, TX at $17,000 (midpoints, 2,000 sq ft of roof). Statewide, Ogden is 3% above the Utah figure.
Other Utah metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Salt Lake City, UT | 826,210 jobs | $9,400 – $30,500 | $20,000 | −3% |
| Provo, UT | 304,660 jobs | $9,200 – $30,200 | $19,700 | −4% |
| St. George, UT | 90,500 jobs | $9,150 – $30,000 | $19,600 | −5% |
| Logan, UT | 66,800 jobs | $9,150 – $30,100 | $19,600 | −5% |
Cities with a workforce like Ogden's
Big cities and small ones price differently, so here is Ogden against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Winston, NC | 271,980 jobs | $9,000 – $29,700 | $19,400 | −6% |
| Jackson, MS | 270,730 jobs | $8,500 – $28,800 | $18,600 | −9% |
| Fayetteville, AR | 275,180 jobs | $8,650 – $28,700 | $18,600 | −9% |
| Poughkeepsie, NY | 268,970 jobs | $11,400 – $36,200 | $23,800 | +16% |
Cost by quality level and size in Ogden
Three bands are cut from the same cited range and localized for Ogden wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.
Basic
$9,800 to $18,400
Corrugated or exposed-fastener steel panels
Standard
$16,200 to $24,900
Standing seam steel
Premium
$22,700 to $31,300
Aluminum or premium finish, complex roof
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small (1,200 sq ft of roof) | $5,950 – $11,200 | $9,850 – $15,100 | $13,800 – $19,000 |
| average (2,000 sq ft of roof) | $9,800 – $18,400 | $16,200 – $24,900 | $22,700 – $31,300 |
| large (2,800 sq ft of roof) | $13,600 – $25,600 | $22,600 – $34,700 | $31,700 – $43,700 |
Specs and site conditions that change a Ogden bid
Other metals
Tin runs $600-$1,800 per roofing square (100 sq ft) installed and aluminum $700-$1,700 per square (HomeGuide).
Panel type
Corrugated sheet metal is $5-$12 per sq ft installed; standing seam is $9-$16 (HomeGuide).
Metal and gauge
Galvalume and galvanized steel are budget-friendly; copper and zinc are the top of the range.
Local wages behind the labor line
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Ogden is 0.96 times the national level.
For roofers (47-2181, weighted 70%) the local median is $24.86 an hour, which is 7% below the national $26.65. The middle half of them earn between $21.64 and $29.96 an hour. BLS counts 510 of them working in the area, 18.8 for every 10,000 jobs (US: 8.7), so the local bench is deeper than average.
For sheet metal workers (47-2211, weighted 20%) the local median is $31.38 an hour, which is 6% above the national $29.71. The middle half of them earn between $27.64 and $35.14 an hour. BLS counts 710 of them working in the area, 26.2 for every 10,000 jobs (US: 7.7), so the local bench is deeper than average.
Construction laborers (47-2061), 10% of the weighting: a median of $22.31 an hour, in line with the US median of $22.66. The middle half of them earn between $18.74 and $26.80 an hour. About 3,140 work in the metro. That is 115.7 per 10,000 jobs, compared with 70.5 nationally, which suggests plenty of local crews to bid.
Quotes come from real crews, not medians. If the roofers on your job are paid at the 75th percentile ($29.96 an hour) instead of the median, the labor line grows by about $1,600. At the 25th percentile ($21.64) it shrinks by about $1,000. The total moves by 7.8% or 4.9%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 271,370 jobs in the Ogden area. That makes it the 95th largest of the 300 metros we cover, with 0.17% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Roofers (47-2181) | 70% | $21.64 | $24.86 | $29.96 | $26.65 | 0.93 | metro |
| Sheet metal workers (47-2211) | 20% | $27.64 | $31.38 | $35.14 | $29.71 | 1.06 | metro |
| Construction laborers (47-2061) | 10% | $18.74 | $22.31 | $26.80 | $22.66 | 0.98 | metro |
| Blended | 100% | 0.96 | |||||
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $16,200 to $24,900 for Ogden, UT is attached.
Take this estimate with you: PDF report, $9
The report lays out the metal roof numbers for Ogden, UT line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Metal roof in Ogden: your questions
+How much does it cost to install a metal roof in Ogden?
For 2,000 sq ft of roof, expect $9,800 to $31,300 in the Ogden area. A standard-spec job lands at $16,200 to $24,900. Small jobs usually cost more per sq ft of roof and large ones less.
+What is the price per sq ft of roof for metal roof in Ogden?
About $4.80 to $15.50 per sq ft of roof for materials and labor, plus $150 to $500 for the permit if one is needed. The US range is $5 to $16.
+Is metal roof cheaper in Ogden or Logan?
Logan is 55 miles away. The midpoint for 2,000 sq ft of roof there is $19,600, which is 5% less than Ogden ($20,600). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Ogden?
About 56% at the midpoint, or $11,600 out of $20,600. Materials are 42% and permits 2%. Nationally, labor is 56%.
+What would average (2,000 sq ft of roof) cost in Ogden?
$9,800 to $31,300. Pick a different size in the estimator above to get your own number.
+Does metal roof need a permit in Ogden?
Often, but rules are set by your city or county building office, so call before you hire. Budget $150 to $500 for fees in the Ogden area (our national range of $150 to $500 scaled by the local price level).
+Is Ogden expensive for metal roof compared with the rest of Utah?
Ogden is 3% above the Utah statewide estimate ($20,000 at the midpoint). We cover 5 metros in Utah; see the state page to compare them.
+What do roofers earn in Ogden?
The BLS median is $24.86 an hour in the Ogden area, compared with $26.65 nationally. The 25th to 75th percentile range is $21.64 to $29.96.
+What do basic and premium metal roof work cost in Ogden?
For 2,000 sq ft of roof, basic work runs $9,800 to $18,400 and premium work $22,700 to $31,300. Basic means: corrugated or exposed-fastener steel panels. Premium means: aluminum or premium finish, complex roof.
+When is the best time to install a metal roof in Ogden?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through June and August through November. August and September are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Metal roof near Ogden
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Metal Roof Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus HomeGuide's $4-$8/sq ft labor range for metal roofs.