Metal roof cost in Albany, NY
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (2,000 sq ft of roof)
- $11,200 – $34,600
- Per sq ft of roof
- $5.55 – $17
- before permit
- Versus US midpoint
- +7%
- US $21,300
- Rank of 300 metros
- #59
- 1 = most expensive
Albany homeowners pay roughly $11,200 to $34,600 to install a metal roof at 2,000 sq ft of roof, or $5.55 to $17 per sq ft of roof (permit not included). Against the US midpoint, Albany is 7% higher. Roofers earn a median of $30.73 an hour in the Albany area, 15% above the US median of $26.65.
Estimate your metal roof cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 2,000 sq ft of roof in Albany, NY, standard level
$18,200 to $27,600
About $9 to $13.50 per sq ft of roof before permits. Labor is about 59% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $6,200 | $11,800 |
| Labor | $11,800 | $15,400 |
| Permits and fees | $250 | $390 |
| Total | $18,200 | $27,600 |
Cost breakdown for 2,000 sq ft of roof in Albany, NY
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $2,000 | $8,950 | $16,000 | 39% |
| Labor | $9,050 | $13,600 | $18,100 | 59% |
| Permits and fees | $150 | $320 | $500 | 1% |
| Total | $11,200 | $22,900 | $34,600 | 100% |
Where the Albany price comes from
Labor is 59% of the midpoint bill here, against 56% nationally. The mix of trades behind this job is roofers (70%), sheet metal workers (20%), construction laborers (10%). We weight each trade's local median wage by that share and compare it with the national median. In Albany the blended ratio comes out at 1.13.
On the materials line, the BEA goods price index for the Albany metro is 99.7 (US = 100). The midpoint materials bill for 2,000 sq ft of roof comes to $8,950, compared with $9,000 at national prices. Permit and inspection fees are scaled by the broader index (99.6) and land at $150 to $500.
Cost by quality level and size in Albany
Three bands are cut from the same cited range and localized for Albany wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.
Basic
$11,200 to $20,600
Corrugated or exposed-fastener steel panels
Standard
$18,200 to $27,600
Standing seam steel
Premium
$25,200 to $34,600
Aluminum or premium finish, complex roof
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small (1,200 sq ft of roof) | $6,800 – $12,500 | $11,000 – $16,700 | $15,300 – $21,000 |
| average (2,000 sq ft of roof) | $11,200 – $20,600 | $18,200 – $27,600 | $25,200 – $34,600 |
| large (2,800 sq ft of roof) | $15,600 – $28,700 | $25,400 – $38,500 | $35,200 – $48,200 |
When to schedule metal roof in Albany
We use NOAA's 1991-2020 climate normals for Albany Ap (5 miles from the city center). These are 30-year monthly averages, not forecasts.
March through November is the stretch where exterior installation runs into the fewest weather problems in Albany (9 of 12 months). January, February and December have an average daytime high under 45°F.
In January, February and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Albany gets about 41 inches of precipitation in a normal year, including roughly 59 inches of snow. The wettest months are June, July and October (4.5 inches in July). Inside the workable window, March and November are the driest, at 3.1 and 3.0 inches. The station averages about 10 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 33 | 16 | 2.6 | Cold |
| Feb | 36 | 18 | 2.3 | Cold |
| Mar | 45 | 26 | 3.1 | Workable |
| Apr | 59 | 37 | 3.1 | Workable |
| May | 71 | 48 | 3.4 | Workable |
| Jun | 79 | 57 | 4.0 | Workable |
| Jul | 84 | 62 | 4.5 | Workable |
| Aug | 82 | 61 | 3.8 | Workable |
| Sep | 74 | 53 | 3.7 | Workable |
| Oct | 62 | 41 | 3.9 | Workable |
| Nov | 49 | 32 | 3.0 | Workable |
| Dec | 38 | 23 | 3.3 | Cold |
Albany against nearby metros and the rest of New York
Same job, same size (2,000 sq ft of roof), priced for the nearest metros. Springfield is the priciest of the group at $25,200. Pittsfield is the cheapest at $21,200.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Albany, NYthis page | $11,200 – $34,600 | $22,900 | |
| Pittsfield, MA45 miles | $10,200 – $32,300 | $21,200 | −7% |
| Kingston, NY60 miles | $11,400 – $35,000 | $23,200 | +1% |
| Amherst, MA70 miles | $12,400 – $36,600 | $24,500 | +7% |
| Utica, NY75 miles | $10,600 – $33,400 | $22,000 | −4% |
| Springfield, MA80 miles | $12,800 – $37,500 | $25,200 | +10% |
| New York (statewide) | $11,800 – $36,800 | $24,300 | +6% |
| United States | $10,200 – $32,500 | $21,300 | −7% |
Across 300 US metros, Albany comes in at #59 from the top. The priciest is Worcester, MA at $29,600; the cheapest is Lubbock, TX at $17,000 (midpoints, 2,000 sq ft of roof). Statewide, Albany is 6% below the New York figure.
Other New York metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| New York, NY | 9,492,000 jobs | $13,100 – $39,700 | $26,400 | +15% |
| Buffalo, NY | 534,550 jobs | $11,200 – $34,600 | $22,900 | level |
| Rochester, NY | 494,280 jobs | $10,800 – $33,700 | $22,200 | −3% |
| Syracuse, NY | 300,130 jobs | $10,800 – $33,800 | $22,300 | −3% |
| Poughkeepsie, NY | 268,970 jobs | $11,400 – $36,200 | $23,800 | +4% |
| Utica, NY | 118,390 jobs | $10,600 – $33,400 | $22,000 | −4% |
Cities with a workforce like Albany's
Big cities and small ones price differently, so here is Albany against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Tulsa, OK | 458,730 jobs | $9,200 – $29,800 | $19,500 | −15% |
| Honolulu, HI | 446,380 jobs | $12,100 – $37,900 | $25,000 | +9% |
| Fresno, CA | 476,890 jobs | $11,400 – $35,600 | $23,500 | +3% |
| New Orleans, LA | 445,550 jobs | $8,850 – $29,100 | $19,000 | −17% |
Related projects, priced for Albany
Because every project leans on different trades, Albany's wage level does not move all prices equally. Against the US midpoint, roof replacement runs +9% and vinyl siding +2%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $6,750 – $13,500 | +9% |
| Gutters | 160 linear ft | $1,350 – $4,350 | +4% |
| Attic insulation | 1,000 sq ft | $1,100 – $4,200 | +5% |
| Vinyl siding | 2,100 sq ft of wall | $8,600 – $25,700 | +2% |
Specs and site conditions that change a Albany bid
Other metals
Tin runs $600-$1,800 per roofing square (100 sq ft) installed and aluminum $700-$1,700 per square (HomeGuide).
Panel type
Corrugated sheet metal is $5-$12 per sq ft installed; standing seam is $9-$16 (HomeGuide).
Metal and gauge
Galvalume and galvanized steel are budget-friendly; copper and zinc are the top of the range.
Local wages behind the labor line
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Albany is 1.13 times the national level.
For roofers (47-2181, weighted 70%) the local median is $30.73 an hour, which is 15% above the national $26.65. The middle half of them earn between $28.75 and $37.23 an hour. BLS counts 440 of them working in the area, 9.8 for every 10,000 jobs (US: 8.7), so the local bench is about average.
For sheet metal workers (47-2211, weighted 20%) the local median is $31.91 an hour, which is 7% above the national $29.71. The middle half of them earn between $24.90 and $39.07 an hour. BLS counts 280 of them working in the area, 6.2 for every 10,000 jobs (US: 7.7), so the local bench is thinner than average.
Construction laborers (47-2061), 10% of the weighting: a median of $25.45 an hour, 12% above the US median of $22.66. The middle half of them earn between $22.03 and $36.39 an hour. About 2,700 work in the metro. That is 60.1 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.
Quotes come from real crews, not medians. If the roofers on your job are paid at the 75th percentile ($37.23 an hour) instead of the median, the labor line grows by about $2,050. At the 25th percentile ($28.75) it shrinks by about $620. The total moves by 8.9% or 2.7%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 449,410 jobs in the Albany-Schenectady-Troy area. That makes it the 55th largest of the 300 metros we cover, with 0.29% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Roofers (47-2181) | 70% | $28.75 | $30.73 | $37.23 | $26.65 | 1.15 | metro |
| Sheet metal workers (47-2211) | 20% | $24.90 | $31.91 | $39.07 | $29.71 | 1.07 | metro |
| Construction laborers (47-2061) | 10% | $22.03 | $25.45 | $36.39 | $22.66 | 1.12 | metro |
| Blended | 100% | 1.13 | |||||
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $18,200 to $27,600 for Albany, NY is attached.
A detailed PDF report of this estimate, $9
The report lays out the metal roof numbers for Albany, NY line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Metal roof in Albany: your questions
+How much does it cost to install a metal roof in Albany?
For 2,000 sq ft of roof, expect $11,200 to $34,600 in the Albany area. A standard-spec job lands at $18,200 to $27,600. Small jobs usually cost more per sq ft of roof and large ones less.
+What is the price per sq ft of roof for metal roof in Albany?
About $5.55 to $17 per sq ft of roof for materials and labor, plus $150 to $500 for the permit if one is needed. The US range is $5 to $16.
+Is metal roof cheaper in Albany or Pittsfield?
Pittsfield is 45 miles away. The midpoint for 2,000 sq ft of roof there is $21,200, which is 7% less than Albany ($22,900). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Albany?
About 59% at the midpoint, or $13,600 out of $22,900. Materials are 39% and permits 1%. Nationally, labor is 56%.
+What would average (2,000 sq ft of roof) cost in Albany?
$11,200 to $34,600. Pick a different size in the estimator above to get your own number.
+Does metal roof need a permit in Albany?
Often, but rules are set by your city or county building office, so call before you hire. Budget $150 to $500 for fees in the Albany area (our national range of $150 to $500 scaled by the local price level).
+Is Albany expensive for metal roof compared with the rest of New York?
Albany is 6% below the New York statewide estimate ($24,300 at the midpoint). We cover 9 metros in New York; see the state page to compare them.
+What do roofers earn in Albany?
The BLS median is $30.73 an hour in the Albany area, compared with $26.65 nationally. The 25th to 75th percentile range is $28.75 to $37.23.
+What do basic and premium metal roof work cost in Albany?
For 2,000 sq ft of roof, basic work runs $11,200 to $20,600 and premium work $25,200 to $34,600. Basic means: corrugated or exposed-fastener steel panels. Premium means: aluminum or premium finish, complex roof.
+When is the best time to install a metal roof in Albany?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through November. March and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Metal roof near Albany
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Metal Roof Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus HomeGuide's $4-$8/sq ft labor range for metal roofs.