Metal roof cost in Georgia
Statewide estimate from BLS wages and BEA prices. Reviewed Nov 4, 2026.
- Statewide range (2,000 sq ft of roof)
- $9,000 – $30,100
- Per sq ft of roof
- $4.45 – $15
- before permit
- Versus US midpoint
- −8%
- US $21,300
- Metros covered
- 10
Georgia prices for metal roof: $9,000 to $30,100 for 2,000 sq ft of roof, or $4.45 to $15 per sq ft of roof without the permit. The state midpoint is 8% below the national one. Local wages for roofers are $22.57 an hour.
Inside Georgia, the metros we cover range from $18,100 (Augusta) to $20,100 (Atlanta) at the midpoint. Pick your closest city in the table for a tighter number.
Estimate your metal roof cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 2,000 sq ft of roof in Georgia (statewide), standard level
$15,300 to $23,700
About $7.55 to $11.50 per sq ft of roof before permits. Labor is about 53% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $6,150 | $11,700 |
| Labor | $8,950 | $11,700 |
| Permits and fees | $250 | $380 |
| Total | $15,300 | $23,700 |
Cost breakdown for 2,000 sq ft of roof in Georgia
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $2,000 | $8,900 | $15,800 | 46% |
| Labor | $6,900 | $10,300 | $13,800 | 53% |
| Permits and fees | $140 | $310 | $480 | 2% |
| Total | $9,000 | $19,500 | $30,100 | 100% |
Why two Georgia quotes can differ
Panel type
Corrugated sheet metal is $5-$12 per sq ft installed; standing seam is $9-$16 (HomeGuide).
Metal and gauge
Galvalume and galvanized steel are budget-friendly; copper and zinc are the top of the range.
Labor
Metal roof labor is $4-$8 per sq ft, or $400-$800 per roofing square, and standing seam needs specialist crews.
Other metals
Tin runs $600-$1,800 per roofing square (100 sq ft) installed and aluminum $700-$1,700 per square (HomeGuide).
What roofers and the other trades earn in Georgia
Georgia's labor line is priced from 3 trades, each compared with its US median wage. After weighting by each trade's share of the work, the state comes out at 0.86 times the national level.
Roofers (47-2181), 70% of the weighting: a median of $22.57 an hour, 15% below the US median of $26.65. The middle half of them earn between $18.69 and $26.36 an hour. About 2,160 work in the state. That is 4.4 per 10,000 jobs, compared with 8.7 nationally, so expect fewer local crews to bid.
Sheet metal workers (47-2211), 20% of the weighting: a median of $27.31 an hour, 8% below the US median of $29.71. The middle half of them earn between $22.23 and $33.96 an hour. About 3,590 work in the state. That is 7.3 per 10,000 jobs, compared with 7.7 nationally, so the supply of crews looks typical.
For construction laborers (47-2061, weighted 10%) the local median is $18.74 an hour, which is 17% below the national $22.66. The middle half of them earn between $16.93 and $22.57 an hour. BLS counts 27,800 of them working in the state, 56.9 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.
A crew paid at the 75th percentile for roofers ($26.36 an hour) would add about $1,200 to the statewide midpoint; one at the 25th percentile ($18.69) would take off about $1,200. Use that as a rough guide to how far a bid can sit from our midpoint on wages alone.
BLS counts 4,889,170 jobs across Georgia (May 2025), which is 3.1% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Roofers (47-2181) | 70% | $18.69 | $22.57 | $26.36 | $26.65 | 0.85 | state |
| Sheet metal workers (47-2211) | 20% | $22.23 | $27.31 | $33.96 | $29.71 | 0.92 | state |
| Construction laborers (47-2061) | 10% | $16.93 | $18.74 | $22.57 | $22.66 | 0.83 | state |
| Blended | 100% | 0.86 | |||||
Georgia against its neighbors
Georgia ranks 36 of 51 (the 50 states plus DC) for metal roof, where 1 is the most expensive. The costliest is New Jersey at $26,800 and the cheapest Mississippi at $18,600, both for 2,000 sq ft of roof at the midpoint. Georgia sits at $19,500. The five states closest by workforce center are listed below.
| State | Distance | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Alabama | 170 miles away | $8,550 – $28,800 | $18,700 | −4% |
| South Carolina | 180 miles away | $8,700 – $29,200 | $18,900 | −3% |
| Tennessee | 210 miles away | $9,000 – $29,700 | $19,300 | −1% |
| North Carolina | 270 miles away | $9,100 – $30,000 | $19,500 | level |
| Kentucky | 320 miles away | $9,150 – $30,000 | $19,600 | level |
Georgia seasons and metal roof
Weather decides when exterior installation can happen, and Georgia is not uniform. The table uses NOAA's 1991-2020 climate normals from the weather station nearest each metro we cover, and counts the months that are neither cold nor hot enough to complicate the job.
Gainesville has the longest comfortable season of the metros we cover in Georgia at 12 months; Albany has the shortest at 9 (September through May). Rainfall runs from 45 inches a year in Augusta to 55 inches in Dalton.
We do not adjust prices by month, because we have no reliable published data on seasonal pricing. Timing is still worth raising when you collect bids.
| Metro | Jan avg low °F | Jul avg high °F | Precip (in/yr) | Comfortable months |
|---|---|---|---|---|
| Atlanta | 34 | 90 | 48 | 11: August through June |
| Augusta | 40 | 94 | 45 | 9: September through May |
| Savannah | 40 | 92 | 48 | 9: September through May |
| Columbus | 38 | 93 | 49 | 9: September through May |
| Gainesville | 34 | 88 | 52 | 12: all year |
| Athens | 34 | 92 | 49 | 10: September through June |
| Macon | 36 | 94 | 47 | 9: September through May |
| Warner Robins | 36 | 91 | 52 | 10: September through June |
| Dalton | 32 | 91 | 55 | 10: September through June |
| Albany | 39 | 93 | 47 | 9: September through May |
Basic, standard or premium: Georgia prices
Bands overlap on purpose, since a good standard job can cost as much as a light premium one. Below are the three bands for the default size, then a grid from small (1,200 sq ft of roof) to large (2,800 sq ft of roof).
Basic
$9,000 to $17,400
Corrugated or exposed-fastener steel panels
Standard
$15,300 to $23,700
Standing seam steel
Premium
$21,600 to $30,100
Aluminum or premium finish, complex roof
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small (1,200 sq ft of roof) | $5,450 – $10,600 | $9,300 – $14,400 | $13,100 – $18,200 |
| average (2,000 sq ft of roof) | $9,000 – $17,400 | $15,300 – $23,700 | $21,600 – $30,100 |
| large (2,800 sq ft of roof) | $12,500 – $24,300 | $21,300 – $33,100 | $30,200 – $41,900 |
Other Georgia jobs that often go with metal roof
Each project weights the trades differently, so Georgia's wage level does not push every price by the same amount. Compared with the US midpoint, attic insulation is −3% and roof replacement −10%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $5,400 – $11,300 | −10% |
| Gutters | 160 linear ft | $1,200 – $4,000 | −6% |
| Attic insulation | 1,000 sq ft | $970 – $3,900 | −3% |
| Vinyl siding | 2,100 sq ft of wall | $7,650 – $22,900 | −9% |
Georgia metro-by-metro prices
2 of the 10 metros sit above the statewide midpoint of $19,500, and the top-to-bottom gap is 11%. Each row prices the default size with that metro's own BLS wages and BEA price levels, so the gap between rows is real local variation rather than a flat markup.
| Metro | Range (2,000 sq ft of roof) | Midpoint | vs. state |
|---|---|---|---|
| Atlanta, GA | $9,300 – $30,900 | $20,100 | +3% |
| Warner Robins, GA | $9,300 – $30,400 | $19,800 | +2% |
| Savannah, GA | $8,950 – $29,600 | $19,300 | −1% |
| Dalton, GA | $8,850 – $29,500 | $19,200 | −2% |
| Gainesville, GA | $8,700 – $29,200 | $18,900 | −3% |
| Athens, GA | $8,700 – $29,100 | $18,900 | −3% |
| Macon, GA | $8,700 – $29,100 | $18,900 | −3% |
| Albany, GA | $8,450 – $28,600 | $18,500 | −5% |
| Columbus, GA | $8,200 – $28,100 | $18,200 | −7% |
| Augusta, GA | $8,150 – $28,100 | $18,100 | −7% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $15,300 to $23,700 for Georgia is attached.
Detailed metal roof report for Georgia, $9
Multi-page report for Georgia: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Metal roof in Georgia: your questions
+How much does it cost to install a metal roof in Georgia?
$9,000 to $30,100 for 2,000 sq ft of roof, using statewide wages and prices. Metro areas inside Georgia can sit above or below that.
+Which city in Georgia is cheapest for metal roof?
Augusta at about $18,100 (midpoint, 2,000 sq ft of roof). The priciest is Atlanta at $20,100.
+Is metal roof cheaper in Georgia than the US average?
It is 8% cheaper: $19,500 against $21,300 for 2,000 sq ft of roof at the midpoint.
+What share of the price is labor in Georgia?
About 53% ($10,300). Materials are 46%. Statewide labor for this job is weighted 0.86x the national wage level.
+What do roofers earn in Georgia?
The BLS statewide median is $22.57 an hour, against $26.65 for the US. The 25th to 75th percentile range is $18.69 to $26.36.
+Where does Georgia rank for metal roof costs?
36th most expensive of 51 (the 50 states plus DC) at the midpoint, $19,500 for 2,000 sq ft of roof. Rank 1 is the costliest.
+What do basic and premium metal roof work cost in Georgia?
For 2,000 sq ft of roof, basic work runs $9,000 to $17,400 and premium work $21,600 to $30,100. Basic means: corrugated or exposed-fastener steel panels. Premium means: aluminum or premium finish, complex roof.
+Does the season matter for metal roof in Georgia?
Yes where winters or summers are hard. Of the Georgia metros we cover, Gainesville has the most comfortable months (12 of 12) based on NOAA 1991-2020 normals. Our prices do not change by month, so ask contractors whether they charge more or less in busy and slow seasons.
Metal roof by city in Georgia
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Metal Roof Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus HomeGuide's $4-$8/sq ft labor range for metal roofs.