Metal roof cost in Hartford, CT
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (2,000 sq ft of roof)
- $11,700 – $35,300
- Per sq ft of roof
- $5.75 – $17.50
- before permit
- Versus US midpoint
- +10%
- US $21,300
- Rank of 300 metros
- #43
- 1 = most expensive
Local price for a metal roof in the Hartford area: $11,700 to $35,300 for 2,000 sq ft of roof. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 10% higher than the US figure. Roofers earn a median of $31.59 an hour in the Hartford area, 19% above the US median of $26.65.
Estimate your metal roof cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 2,000 sq ft of roof in Hartford, CT, standard level
$18,800 to $28,200
About $9.25 to $14 per sq ft of roof before permits. Labor is about 61% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $6,050 | $11,500 |
| Labor | $12,500 | $16,300 |
| Permits and fees | $260 | $410 |
| Total | $18,800 | $28,200 |
Cost breakdown for 2,000 sq ft of roof in Hartford, CT
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $1,950 | $8,750 | $15,600 | 37% |
| Labor | $9,600 | $14,400 | $19,200 | 61% |
| Permits and fees | $150 | $330 | $510 | 1% |
| Total | $11,700 | $23,500 | $35,300 | 100% |
What is behind the Hartford number
Labor is 61% of the midpoint bill here, against 56% nationally. The mix of trades behind this job is roofers (70%), sheet metal workers (20%), construction laborers (10%). We weight each trade's local median wage by that share and compare it with the national median. In Hartford the blended ratio comes out at 1.20.
Materials are scaled with BEA's regional price parity for goods. Hartford is at 97.3 against 100 for the US, so a materials line of $9,000 nationally becomes $8,750 here (midpoint, 2,000 sq ft of roof). Permits follow the all-items index of 102.7: $150 to $510.
The best months for metal roof in Hartford
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Hartford Brainard Fld (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Hartford are March through November: 9 of 12. Outside them, January, February and December have an average daytime high under 45°F.
In January, February and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Hartford gets about 43 inches of precipitation in a normal year. The wettest months are June, September and October (4.2 inches in October). Inside the workable window, May and November are the driest, at 3.4 and 3.4 inches. The station averages about 17 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 37 | 20 | 2.9 | Cold |
| Feb | 40 | 22 | 2.6 | Cold |
| Mar | 48 | 30 | 3.5 | Workable |
| Apr | 60 | 40 | 3.8 | Workable |
| May | 71 | 50 | 3.4 | Workable |
| Jun | 80 | 60 | 3.9 | Workable |
| Jul | 85 | 66 | 3.9 | Workable |
| Aug | 83 | 64 | 3.5 | Workable |
| Sep | 76 | 56 | 4.0 | Workable |
| Oct | 64 | 44 | 4.2 | Workable |
| Nov | 52 | 35 | 3.4 | Workable |
| Dec | 42 | 26 | 3.8 | Cold |
Who does the work: Hartford trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Hartford the blend is 1.20.
Roofers (47-2181), 70% of the weighting: a median of $31.59 an hour, 19% above the US median of $26.65. The middle half of them earn between $24.77 and $45.17 an hour. About 350 work in the metro. That is 5.8 per 10,000 jobs, compared with 8.7 nationally, so expect fewer local crews to bid.
Sheet metal workers (47-2211), 20% of the weighting: a median of $37.22 an hour, 25% above the US median of $29.71. The middle half of them earn between $26.77 and $44.53 an hour. About 490 work in the metro. That is 8.2 per 10,000 jobs, compared with 7.7 nationally, so the supply of crews looks typical.
For construction laborers (47-2061, weighted 10%) the local median is $27.06 an hour, which is 19% above the national $22.66. The middle half of them earn between $22.76 and $35.02 an hour. BLS counts 2,430 of them working in the area, 40.5 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.
A quick sensitivity check: moving the lead trade (roofers) from the median to the 75th percentile wage adds about $4,300 to the midpoint estimate; the 25th percentile takes off about $2,150. That is a swing of roughly 9.2% to 18.2% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Hartford-West Hartford-East Hartford has 599,770 jobs in total (BLS, May 2025), ranking 47th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Roofers (47-2181) | 70% | $24.77 | $31.59 | $45.17 | $26.65 | 1.19 | metro |
| Sheet metal workers (47-2211) | 20% | $26.77 | $37.22 | $44.53 | $29.71 | 1.25 | metro |
| Construction laborers (47-2061) | 10% | $22.76 | $27.06 | $35.02 | $22.66 | 1.19 | metro |
| Blended | 100% | 1.20 | |||||
Specs and site conditions that change a Hartford bid
Panel type
Corrugated sheet metal is $5-$12 per sq ft installed; standing seam is $9-$16 (HomeGuide).
Metal and gauge
Galvalume and galvanized steel are budget-friendly; copper and zinc are the top of the range.
Labor
Metal roof labor is $4-$8 per sq ft, or $400-$800 per roofing square, and standing seam needs specialist crews.
Hartford: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Hartford. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from small (1,200 sq ft of roof) to large (2,800 sq ft of roof).
Basic
$11,700 to $21,100
Corrugated or exposed-fastener steel panels
Standard
$18,800 to $28,200
Standing seam steel
Premium
$25,800 to $35,300
Aluminum or premium finish, complex roof
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small (1,200 sq ft of roof) | $7,100 – $12,800 | $11,400 – $17,100 | $15,700 – $21,400 |
| average (2,000 sq ft of roof) | $11,700 – $21,100 | $18,800 – $28,200 | $25,800 – $35,300 |
| large (2,800 sq ft of roof) | $16,300 – $29,500 | $26,200 – $39,300 | $36,000 – $49,200 |
Related projects, priced for Hartford
Jobs that often go together with metal roof are priced below at their usual sizes, using the same Hartford wage and price inputs. Compared with national midpoints, roof replacement comes out highest (+11%) and attic insulation lowest (−1%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $6,900 – $13,700 | +11% |
| Gutters | 160 linear ft | $1,400 – $4,450 | +7% |
| Attic insulation | 1,000 sq ft | $1,000 – $3,950 | −1% |
| Vinyl siding | 2,100 sq ft of wall | $8,800 – $26,400 | +5% |
Is Hartford cheap or dear? The local comparison
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 2,000 sq ft of roof range from $22,400 to $25,200 across Hartford and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Hartford, CTthis page | $11,700 – $35,300 | $23,500 | |
| Norwich, CT25 miles | $11,300 – $34,500 | $22,900 | −2% |
| Waterbury, CT30 miles | $10,900 – $33,800 | $22,400 | −5% |
| Springfield, MA30 miles | $12,800 – $37,500 | $25,200 | +7% |
| New Haven, CT30 miles | $11,000 – $34,000 | $22,500 | −4% |
| Amherst, MA45 miles | $12,400 – $36,600 | $24,500 | +4% |
| Connecticut (statewide) | $11,400 – $34,700 | $23,000 | −2% |
| United States | $10,200 – $32,500 | $21,300 | −9% |
Out of the 300 metros we cover, Hartford ranks #43 for the cost of this job (#1 is the most expensive). Statewide, Hartford is 2% above the Connecticut figure.
Elsewhere in Connecticut
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Bridgeport, CT | 404,180 jobs | $13,400 – $38,700 | $26,100 | +11% |
| New Haven, CT | 281,410 jobs | $11,000 – $34,000 | $22,500 | −4% |
| Waterbury, CT | 160,710 jobs | $10,900 – $33,800 | $22,400 | −5% |
| Norwich, CT | 126,450 jobs | $11,300 – $34,500 | $22,900 | −2% |
Metros of a similar size
Big cities and small ones price differently, so here is Hartford against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Memphis, TN | 611,670 jobs | $9,100 – $29,900 | $19,500 | −17% |
| Grand Rapids, MI | 598,260 jobs | $9,200 – $29,900 | $19,600 | −17% |
| Richmond, VA | 660,350 jobs | $8,900 – $29,600 | $19,300 | −18% |
| Buffalo, NY | 534,550 jobs | $11,200 – $34,600 | $22,900 | −3% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $18,800 to $28,200 for Hartford, CT is attached.
Detailed metal roof report for Hartford, CT, $9
The report lays out the metal roof numbers for Hartford, CT line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Metal roof in Hartford: your questions
+How much does it cost to install a metal roof in Hartford?
For 2,000 sq ft of roof, expect $11,700 to $35,300 in the Hartford area. A standard-spec job lands at $18,800 to $28,200. Small jobs usually cost more per sq ft of roof and large ones less.
+What is the price per sq ft of roof for metal roof in Hartford?
About $5.75 to $17.50 per sq ft of roof for materials and labor, plus $150 to $510 for the permit if one is needed. The US range is $5 to $16.
+Is metal roof cheaper in Hartford or Norwich?
Norwich is 25 miles away. The midpoint for 2,000 sq ft of roof there is $22,900, which is 2% less than Hartford ($23,500). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Hartford?
About 61% at the midpoint, or $14,400 out of $23,500. Materials are 37% and permits 1%. Nationally, labor is 56%.
+What would average (2,000 sq ft of roof) cost in Hartford?
$11,700 to $35,300. Pick a different size in the estimator above to get your own number.
+Does metal roof need a permit in Hartford?
Often, but rules are set by your city or county building office, so call before you hire. Budget $150 to $510 for fees in the Hartford area (our national range of $150 to $500 scaled by the local price level).
+Is Hartford expensive for metal roof compared with the rest of Connecticut?
Hartford is 2% above the Connecticut statewide estimate ($23,000 at the midpoint). We cover 5 metros in Connecticut; see the state page to compare them.
+What do roofers earn in Hartford?
The BLS median is $31.59 an hour in the Hartford area, compared with $26.65 nationally. The 25th to 75th percentile range is $24.77 to $45.17.
+What do basic and premium metal roof work cost in Hartford?
For 2,000 sq ft of roof, basic work runs $11,700 to $21,100 and premium work $25,800 to $35,300. Basic means: corrugated or exposed-fastener steel panels. Premium means: aluminum or premium finish, complex roof.
+When is the best time to install a metal roof in Hartford?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through November. May and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Metal roof near Hartford
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Metal Roof Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus HomeGuide's $4-$8/sq ft labor range for metal roofs.