Skip to content
CostLocal

Laminate flooring cost in Clarksville, TN

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (500 sq ft)
$1,750 – $6,300
Per sq ft
$3.55 – $12.50
before permit
Versus US midpoint
−10%
US $4,500
Rank of 300 metros
#216
1 = most expensive

Clarksville homeowners pay roughly $1,750 to $6,300 to install laminate flooring at 500 sq ft, or $3.55 to $12.50 per sq ft (permit not included). Against the US midpoint, Clarksville is 10% lower. Floor layers (except carpet, wood and hard tiles) earn a median of $23.99 an hour in the Clarksville area, 12% below the US median of $27.15.

Estimate your laminate flooring cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Thicker waterproof laminate, standard trim

Estimated cost for 500 sq ft in Clarksville, TN, standard level

$3,150 to $4,950

About $6.25 to $9.90 per sq ft before permits. Labor is about 58% of the bill.

Cost breakdown
PartLowHigh
Materials$1,200$2,150
Labor$1,900$2,800
Permits and fees$0$0
Total$3,150$4,950
Save and get a PDF report

Cost breakdown for 500 sq ft in Clarksville, TN

Part of the jobLowMidpointHighShare
Materials$480$1,700$2,90042%
Labor$1,300$2,350$3,40058%
Permits and fees$0$0$00%
Total$1,750$4,050$6,300100%

What is behind the Clarksville number

We price the labor side from BLS wage data for 2 trades: floor layers (except carpet, wood and hard tiles) at 60%, carpenters at 40%. Weighted together, Clarksville wages are 0.85 times the national level. Labor makes up about 58% of the midpoint estimate (61% at national prices). BLS does not publish this trade for the metro, so we used the Tennessee statewide median.

On the materials line, the BEA goods price index for the Clarksville metro is 96.2 (US = 100). The midpoint materials bill for 500 sq ft comes to $1,700, compared with $1,750 at national prices. Permit and inspection fees are scaled by the broader index (90.9) and land at $0 to $0.

Data note: 60% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Clarksville. The wage table below marks each row.

Why two Clarksville quotes can differ

  • Floating versus glued

    Click-lock or floating laminate is the easiest and cheapest to install (HomeGuide).

  • Trim

    Baseboards run $6-$9 per linear foot and are a common add-on.

  • Heated floors

    Radiant floor heating adds $7-$17 per sq ft and has to go in before the floor does.

Local wages behind the labor line

Wages are the part of this estimate that changes most from town to town. 2 trades carry the job here, and each is compared with its US median. The weighted result for Clarksville is 0.85 times the national level.

Floor layers (except carpet, wood and hard tiles) (47-2042) carry 60% of the labor weighting. BLS does not publish this trade for the Clarksville metro, so we used the Tennessee statewide median: $23.99 an hour against $27.15 for the US. The middle half of them earn between $19.58 and $28.21 an hour.

For carpenters (47-2031, weighted 40%) the local median is $23.60 an hour, which is 19% below the national $29.12. The middle half of them earn between $21.48 and $28.68 an hour. BLS counts 290 of them working in the area, 28.1 for every 10,000 jobs (US: 43.1), so the local bench is thinner than average.

Quotes come from real crews, not medians. If the floor layers (except carpet, wood and hard tiles) on your job are paid at the 75th percentile ($28.21 an hour) instead of the median, the labor line grows by about $260. At the 25th percentile ($19.58) it shrinks by about $270. The total moves by 6.4% or 6.6%, so wages alone rarely explain a quote that is far outside our range.

For context on the local economy, BLS counts 103,220 jobs in the Clarksville area. That makes it the 200th largest of the 300 metros we cover, with 0.07% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Floor layers (except carpet, wood and hard tiles) (47-2042)60%$19.58$23.99$28.21$27.150.88state
Carpenters (47-2031)40%$21.48$23.60$28.68$29.120.81metro
Blended100%0.85

Clarksville: what basic, standard and premium work costs

Three bands are cut from the same cited range and localized for Clarksville wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.

Basic

$1,750 to $3,600

Basic click-lock laminate on a flat subfloor

Standard

$3,150 to $4,950

Thicker waterproof laminate, standard trim

Premium

$4,500 to $6,300

Premium or brand-name laminate, subfloor repair

Cost by size and quality level
SizeBasicStandardPremium
one room (200 sq ft)$710 – $1,450$1,250 – $2,000$1,800 – $2,500
main floor (500 sq ft)$1,750 – $3,600$3,150 – $4,950$4,500 – $6,300
whole house (1,200 sq ft)$4,250 – $8,600$7,500 – $11,900$10,800 – $15,100

Is Clarksville cheap or dear? The local comparison

Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 500 sq ft range from $3,700 to $4,350 across Clarksville and its five closest metros.

Comparison with nearby areas
AreaRangeMidpointvs. here
Clarksville, TNthis page$1,750 – $6,300$4,050
Nashville, TN65 miles$1,900 – $6,750$4,350+7%
Bowling Green, KY70 miles$1,700 – $6,200$3,950−2%
Evansville, IN95 miles$1,900 – $6,700$4,300+7%
Jackson, TN95 miles$1,750 – $6,250$4,000−1%
Huntsville, AL140 miles$1,600 – $5,850$3,700−8%
Tennessee (statewide)$1,800 – $6,350$4,050+1%
United States$2,000 – $7,000$4,500+12%

Across 300 US metros, Clarksville comes in at #216 from the top. The priciest is San Jose, CA at $6,350; the cheapest is Brownsville, TX at $3,550 (midpoints, 500 sq ft). Statewide, Clarksville is 1% below the Tennessee figure.

Other Tennessee metros

Tennessee metros compared with Clarksville
MetroSizeRangeMidpointvs. here
Nashville, TN1,099,300 jobs$1,900 – $6,750$4,350+7%
Memphis, TN611,670 jobs$1,800 – $6,350$4,050+1%
Knoxville, TN424,600 jobs$1,800 – $6,400$4,100+2%
Chattanooga, TN268,750 jobs$1,800 – $6,350$4,050+1%
Kingsport, TN119,560 jobs$1,750 – $6,300$4,000level
Jackson, TN84,530 jobs$1,750 – $6,250$4,000−1%

Cities with a workforce like Clarksville's

Big cities and small ones price differently, so here is Clarksville against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Charleston, WV103,450 jobs$1,700 – $6,100$3,900−3%
Lafayette, IN102,200 jobs$1,900 – $6,650$4,300+6%
Gainesville, GA103,870 jobs$1,650 – $6,050$3,850−4%
Lake Charles, LA101,690 jobs$1,600 – $5,800$3,700−8%

What nearby projects cost in Clarksville

Because every project leans on different trades, Clarksville's wage level does not move all prices equally. Against the US midpoint, kitchen remodel runs −7% and bathroom remodel −11%.

Related projects with local prices
ProjectSizeRangevs. US
Hardwood flooring500 sq ft$4,950 – $11,400−9%
Tile flooring200 sq ft$2,000 – $9,150−10%
Kitchen remodel120 sq ft$17,300 – $29,400−7%
Bathroom remodel45 sq ft$4,200 – $20,800−11%

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $3,150 to $4,950 for Clarksville, TN is attached.

Take this estimate with you: PDF report, $9

The report lays out the laminate flooring numbers for Clarksville, TN line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Laminate flooring in Clarksville: your questions

+How much does it cost to install laminate flooring in Clarksville?

For 500 sq ft, expect $1,750 to $6,300 in the Clarksville area. A standard-spec job lands at $3,150 to $4,950. Small jobs usually cost more per sq ft and large ones less.

+What is the price per sq ft for laminate floor in Clarksville?

About $3.55 to $12.50 per sq ft for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $4 to $14.

+Is laminate floor cheaper in Clarksville or Nashville?

Nashville is 65 miles away. The midpoint for 500 sq ft there is $4,350, which is 7% more than Clarksville ($4,050). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Clarksville?

About 58% at the midpoint, or $2,350 out of $4,050. Materials are 42% and permits 0%. Nationally, labor is 61%.

+What would main floor (500 sq ft) cost in Clarksville?

$1,750 to $6,300. Pick a different size in the estimator above to get your own number.

+Does laminate floor need a permit in Clarksville?

Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Clarksville area (our national range of $0 to $0 scaled by the local price level).

+Is Clarksville expensive for laminate floor compared with the rest of Tennessee?

Clarksville is 1% below the Tennessee statewide estimate ($4,050 at the midpoint). We cover 8 metros in Tennessee; see the state page to compare them.

+What do floor layers (except carpet, wood and hard tiles) earn in Clarksville?

BLS has no published metro figure here, so we use the statewide median of $23.99 an hour, compared with $27.15 nationally. The 25th to 75th percentile range is $19.58 to $28.21.

+What do basic and premium laminate floor work cost in Clarksville?

For 500 sq ft, basic work runs $1,750 to $3,600 and premium work $4,500 to $6,300. Basic means: basic click-lock laminate on a flat subfloor. Premium means: premium or brand-name laminate, subfloor repair.

Laminate flooring near Clarksville

Laminate flooring: all pricesLaminate flooring in TennesseeAll projects in ClarksvilleTennessee cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = installed price minus HomeGuide's $3-$8 per sq ft laminate labor, matched low-to-low and high-to-high.