Laminate flooring cost in Myrtle Beach, SC
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (500 sq ft)
- $1,750 – $6,250
- Per sq ft
- $3.50 – $12.50
- before permit
- Versus US midpoint
- −11%
- US $4,500
- Rank of 300 metros
- #228
- 1 = most expensive
Local price for a laminate floor in the Myrtle Beach area: $1,750 to $6,250 for 500 sq ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 11% lower than the US figure. Floor layers (except carpet, wood and hard tiles) earn a median of $23.97 an hour in the Myrtle Beach area, 12% below the US median of $27.15.
Estimate your laminate flooring cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 500 sq ft in Myrtle Beach, SC, standard level
$3,100 to $4,900
About $6.20 to $9.85 per sq ft before permits. Labor is about 58% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,200 | $2,150 |
| Labor | $1,900 | $2,750 |
| Permits and fees | $0 | $0 |
| Total | $3,100 | $4,900 |
Cost breakdown for 500 sq ft in Myrtle Beach, SC
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $480 | $1,700 | $2,900 | 42% |
| Labor | $1,250 | $2,300 | $3,400 | 58% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $1,750 | $4,000 | $6,250 | 100% |
What is behind the Myrtle Beach number
Labor is 58% of the midpoint bill here, against 61% nationally. The mix of trades behind this job is floor layers (except carpet, wood and hard tiles) (60%), carpenters (40%). We weight each trade's local median wage by that share and compare it with the national median. In Myrtle Beach the blended ratio comes out at 0.85. BLS does not publish this trade for the metro, so we used the South Carolina statewide median.
Materials are scaled with BEA's regional price parity for goods. Myrtle Beach is at 96.3 against 100 for the US, so a materials line of $1,750 nationally becomes $1,700 here (midpoint, 500 sq ft). Permits follow the all-items index of 93.6: $0 to $0.
Data note: 60% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Myrtle Beach. The wage table below marks each row.
Pick a size, pick a tier: laminate flooring pricing in Myrtle Beach
The cited range is split into basic, standard and premium bands, then scaled to Myrtle Beach. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from one room (200 sq ft) to whole house (1,200 sq ft).
Basic
$1,750 to $3,550
Basic click-lock laminate on a flat subfloor
Standard
$3,100 to $4,900
Thicker waterproof laminate, standard trim
Premium
$4,450 to $6,250
Premium or brand-name laminate, subfloor repair
| Size | Basic | Standard | Premium |
|---|---|---|---|
| one room (200 sq ft) | $700 – $1,400 | $1,250 – $1,950 | $1,800 – $2,500 |
| main floor (500 sq ft) | $1,750 – $3,550 | $3,100 – $4,900 | $4,450 – $6,250 |
| whole house (1,200 sq ft) | $4,200 – $8,550 | $7,450 – $11,800 | $10,700 – $15,000 |
Myrtle Beach against nearby metros and the rest of South Carolina
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 500 sq ft range from $4,000 to $4,100 across Myrtle Beach and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Myrtle Beach, SCthis page | $1,750 – $6,250 | $4,000 | |
| Florence, SC50 miles | $1,750 – $6,300 | $4,050 | +1% |
| Wilmington, NC60 miles | $1,800 – $6,450 | $4,100 | +3% |
| Fayetteville, NC80 miles | $1,750 – $6,350 | $4,050 | +1% |
| Charleston, SC85 miles | $1,800 – $6,450 | $4,100 | +3% |
| Columbia, SC120 miles | $1,750 – $6,300 | $4,000 | level |
| South Carolina (statewide) | $1,800 – $6,350 | $4,050 | +1% |
| United States | $2,000 – $7,000 | $4,500 | +12% |
Out of the 300 metros we cover, Myrtle Beach ranks #228 for the cost of this job (#1 is the most expensive). Statewide, Myrtle Beach is 1% below the South Carolina figure.
Elsewhere in South Carolina
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Greenville, SC | 434,900 jobs | $1,750 – $6,350 | $4,050 | +1% |
| Columbia, SC | 394,200 jobs | $1,750 – $6,300 | $4,000 | level |
| Charleston, SC | 394,170 jobs | $1,800 – $6,450 | $4,100 | +3% |
| Spartanburg, SC | 165,150 jobs | $1,800 – $6,400 | $4,100 | +2% |
| Florence, SC | 89,060 jobs | $1,750 – $6,300 | $4,050 | +1% |
| Hilton Head, SC | 81,920 jobs | $1,750 – $6,300 | $4,050 | +1% |
Metros of a similar size
Big cities and small ones price differently, so here is Myrtle Beach against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Fargo, ND | 148,660 jobs | $1,850 – $6,450 | $4,150 | +3% |
| Vallejo, CA | 144,130 jobs | $2,150 – $7,550 | $4,850 | +21% |
| Killeen, TX | 150,580 jobs | $1,650 – $5,900 | $3,750 | −6% |
| Huntington, WV | 140,740 jobs | $1,700 – $6,200 | $3,950 | −1% |
What nearby projects cost in Myrtle Beach
Jobs that often go together with laminate floor are priced below at their usual sizes, using the same Myrtle Beach wage and price inputs. Compared with national midpoints, kitchen remodel comes out highest (−7%) and bathroom remodel lowest (−14%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Hardwood flooring | 500 sq ft | $4,950 – $11,300 | −10% |
| Tile flooring | 200 sq ft | $1,950 – $9,100 | −11% |
| Kitchen remodel | 120 sq ft | $17,100 – $29,200 | −7% |
| Bathroom remodel | 45 sq ft | $4,050 – $20,100 | −14% |
Why two Myrtle Beach quotes can differ
Trim
Baseboards run $6-$9 per linear foot and are a common add-on.
Heated floors
Radiant floor heating adds $7-$17 per sq ft and has to go in before the floor does.
Brand
Name-brand laminate such as Pergo runs $5-$17 per sq ft installed.
Who does the work: Myrtle Beach trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Myrtle Beach the blend is 0.85.
Floor layers (except carpet, wood and hard tiles) (47-2042) carry 60% of the labor weighting. BLS does not publish this trade for the Myrtle Beach metro, so we used the South Carolina statewide median: $23.97 an hour against $27.15 for the US. The middle half of them earn between $20.49 and $26.23 an hour.
Carpenters (47-2031), 40% of the weighting: a median of $22.96 an hour, 21% below the US median of $29.12. The middle half of them earn between $20.40 and $27.34 an hour. About 510 work in the metro. That is 34.9 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.
A quick sensitivity check: moving the lead trade (floor layers (except carpet, wood and hard tiles)) from the median to the 75th percentile wage adds about $140 to the midpoint estimate; the 25th percentile takes off about $210. That is a swing of roughly 5.3% to 3.4% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Myrtle Beach-Conway-North Myrtle Beach has 146,260 jobs in total (BLS, May 2025), ranking 157th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Floor layers (except carpet, wood and hard tiles) (47-2042) | 60% | $20.49 | $23.97 | $26.23 | $27.15 | 0.88 | state |
| Carpenters (47-2031) | 40% | $20.40 | $22.96 | $27.34 | $29.12 | 0.79 | metro |
| Blended | 100% | 0.85 | |||||
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $3,100 to $4,900 for Myrtle Beach, SC is attached.
Take this estimate with you: PDF report, $9
Multi-page report for Myrtle Beach, SC: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Laminate flooring in Myrtle Beach: your questions
+How much does it cost to install laminate flooring in Myrtle Beach?
For 500 sq ft, expect $1,750 to $6,250 in the Myrtle Beach area. A standard-spec job lands at $3,100 to $4,900. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for laminate floor in Myrtle Beach?
About $3.50 to $12.50 per sq ft for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $4 to $14.
+Is laminate floor cheaper in Myrtle Beach or Florence?
Florence is 50 miles away. The midpoint for 500 sq ft there is $4,050, which is 1% more than Myrtle Beach ($4,000). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Myrtle Beach?
About 58% at the midpoint, or $2,300 out of $4,000. Materials are 42% and permits 0%. Nationally, labor is 61%.
+What would main floor (500 sq ft) cost in Myrtle Beach?
$1,750 to $6,250. Pick a different size in the estimator above to get your own number.
+Does laminate floor need a permit in Myrtle Beach?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Myrtle Beach area (our national range of $0 to $0 scaled by the local price level).
+Is Myrtle Beach expensive for laminate floor compared with the rest of South Carolina?
Myrtle Beach is 1% below the South Carolina statewide estimate ($4,050 at the midpoint). We cover 7 metros in South Carolina; see the state page to compare them.
+What do floor layers (except carpet, wood and hard tiles) earn in Myrtle Beach?
BLS has no published metro figure here, so we use the statewide median of $23.97 an hour, compared with $27.15 nationally. The 25th to 75th percentile range is $20.49 to $26.23.
+What do basic and premium laminate floor work cost in Myrtle Beach?
For 500 sq ft, basic work runs $1,750 to $3,550 and premium work $4,450 to $6,250. Basic means: basic click-lock laminate on a flat subfloor. Premium means: premium or brand-name laminate, subfloor repair.
Laminate flooring near Myrtle Beach
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Laminate Flooring Installation Cost? (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
Note on derived figures: Materials = installed price minus HomeGuide's $3-$8 per sq ft laminate labor, matched low-to-low and high-to-high.