Laminate flooring cost in Greenville, NC
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (500 sq ft)
- $1,750 – $6,350
- Per sq ft
- $3.55 – $12.50
- before permit
- Versus US midpoint
- −10%
- US $4,500
- Rank of 300 metros
- #210
- 1 = most expensive
Greenville homeowners pay roughly $1,750 to $6,350 to install laminate flooring at 500 sq ft, or $3.55 to $12.50 per sq ft (permit not included). Against the US midpoint, Greenville is 10% lower. Floor layers (except carpet, wood and hard tiles) earn a median of $24.86 an hour in the Greenville area, 8% below the US median of $27.15.
Estimate your laminate flooring cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 500 sq ft in Greenville, NC, standard level
$3,150 to $4,950
About $6.30 to $9.95 per sq ft before permits. Labor is about 58% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,200 | $2,150 |
| Labor | $1,950 | $2,800 |
| Permits and fees | $0 | $0 |
| Total | $3,150 | $4,950 |
Cost breakdown for 500 sq ft in Greenville, NC
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $480 | $1,700 | $2,900 | 42% |
| Labor | $1,300 | $2,350 | $3,450 | 58% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $1,750 | $4,050 | $6,350 | 100% |
Where the Greenville price comes from
The wage side of the estimate leans on floor layers (except carpet, wood and hard tiles), who do 60% of the hours on a typical job. Their local median is $24.86 an hour. Add the other trades involved and the blended wage index for Greenville is 0.86 (US = 1.00), which puts labor at 58% of the total. BLS does not publish this trade for the metro, so we used the North Carolina statewide median.
On the materials line, the BEA goods price index for the Greenville metro is 96.6 (US = 100). The midpoint materials bill for 500 sq ft comes to $1,700, compared with $1,750 at national prices. Permit and inspection fees are scaled by the broader index (88.4) and land at $0 to $0.
Data note: 60% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Greenville. The wage table below marks each row.
What nearby projects cost in Greenville
Because every project leans on different trades, Greenville's wage level does not move all prices equally. Against the US midpoint, kitchen remodel runs −7% and bathroom remodel −11%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Hardwood flooring | 500 sq ft | $4,950 – $11,300 | −10% |
| Tile flooring | 200 sq ft | $2,000 – $9,200 | −9% |
| Kitchen remodel | 120 sq ft | $17,200 – $29,300 | −7% |
| Bathroom remodel | 45 sq ft | $4,150 – $20,600 | −11% |
Why two Greenville quotes can differ
Trim
Baseboards run $6-$9 per linear foot and are a common add-on.
Heated floors
Radiant floor heating adds $7-$17 per sq ft and has to go in before the floor does.
Brand
Name-brand laminate such as Pergo runs $5-$17 per sq ft installed.
Greenville: what basic, standard and premium work costs
Three bands are cut from the same cited range and localized for Greenville wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.
Basic
$1,750 to $3,600
Basic click-lock laminate on a flat subfloor
Standard
$3,150 to $4,950
Thicker waterproof laminate, standard trim
Premium
$4,500 to $6,350
Premium or brand-name laminate, subfloor repair
| Size | Basic | Standard | Premium |
|---|---|---|---|
| one room (200 sq ft) | $710 – $1,450 | $1,250 – $2,000 | $1,800 – $2,550 |
| main floor (500 sq ft) | $1,750 – $3,600 | $3,150 – $4,950 | $4,500 – $6,350 |
| whole house (1,200 sq ft) | $4,250 – $8,650 | $7,550 – $11,900 | $10,800 – $15,200 |
Local wages behind the labor line
Wages are the part of this estimate that changes most from town to town. 2 trades carry the job here, and each is compared with its US median. The weighted result for Greenville is 0.86 times the national level.
Floor layers (except carpet, wood and hard tiles) (47-2042) carry 60% of the labor weighting. BLS does not publish this trade for the Greenville metro, so we used the North Carolina statewide median: $24.86 an hour against $27.15 for the US. The middle half of them earn between $21.47 and $29.98 an hour.
For carpenters (47-2031, weighted 40%) the local median is $22.47 an hour, which is 23% below the national $29.12. The middle half of them earn between $18.46 and $27.01 an hour. BLS counts 180 of them working in the area, 22.3 for every 10,000 jobs (US: 43.1), so the local bench is thinner than average.
Quotes come from real crews, not medians. If the floor layers (except carpet, wood and hard tiles) on your job are paid at the 75th percentile ($29.98 an hour) instead of the median, the labor line grows by about $310. At the 25th percentile ($21.47) it shrinks by about $210. The total moves by 7.7% or 5.1%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 80,770 jobs in the Greenville area. That makes it the 236th largest of the 300 metros we cover, with 0.05% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Floor layers (except carpet, wood and hard tiles) (47-2042) | 60% | $21.47 | $24.86 | $29.98 | $27.15 | 0.92 | state |
| Carpenters (47-2031) | 40% | $18.46 | $22.47 | $27.01 | $29.12 | 0.77 | metro |
| Blended | 100% | 0.86 | |||||
How Greenville compares
Same job, same size (500 sq ft), priced for the nearest metros. Durham is the priciest of the group at $4,150. Virginia Beach is the cheapest at $4,050.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Greenville, NCthis page | $1,750 – $6,350 | $4,050 | |
| Raleigh, NC60 miles | $1,800 – $6,450 | $4,100 | +2% |
| Fayetteville, NC100 miles | $1,750 – $6,350 | $4,050 | level |
| Wilmington, NC100 miles | $1,800 – $6,450 | $4,100 | +2% |
| Durham, NC100 miles | $1,800 – $6,450 | $4,150 | +2% |
| Virginia Beach, VA100 miles | $1,750 – $6,350 | $4,050 | level |
| North Carolina (statewide) | $1,800 – $6,400 | $4,100 | +1% |
| United States | $2,000 – $7,000 | $4,500 | +11% |
Across 300 US metros, Greenville comes in at #210 from the top. The priciest is San Jose, CA at $6,350; the cheapest is Brownsville, TX at $3,550 (midpoints, 500 sq ft). Statewide, Greenville is 1% below the North Carolina figure.
Other North Carolina metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Charlotte, NC | 1,358,370 jobs | $1,900 – $6,600 | $4,250 | +5% |
| Raleigh, NC | 743,120 jobs | $1,800 – $6,450 | $4,100 | +2% |
| Greensboro, NC | 365,410 jobs | $1,800 – $6,400 | $4,100 | +1% |
| Durham, NC | 344,020 jobs | $1,800 – $6,450 | $4,150 | +2% |
| Winston, NC | 271,980 jobs | $1,800 – $6,400 | $4,100 | +1% |
| Wilmington, NC | 191,280 jobs | $1,800 – $6,450 | $4,100 | +2% |
Cities with a workforce like Greenville's
Big cities and small ones price differently, so here is Greenville against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Odessa, TX | 80,910 jobs | $1,650 – $6,000 | $3,850 | −5% |
| Jefferson City, MO | 80,220 jobs | $1,900 – $6,650 | $4,300 | +6% |
| Johnson City, TN | 81,690 jobs | $1,750 – $6,250 | $4,000 | −1% |
| Las Cruces, NM | 80,000 jobs | $1,850 – $6,500 | $4,150 | +3% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $3,150 to $4,950 for Greenville, NC is attached.
Take this estimate with you: PDF report, $9
The report lays out the laminate flooring numbers for Greenville, NC line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Laminate flooring in Greenville: your questions
+How much does it cost to install laminate flooring in Greenville?
For 500 sq ft, expect $1,750 to $6,350 in the Greenville area. A standard-spec job lands at $3,150 to $4,950. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for laminate floor in Greenville?
About $3.55 to $12.50 per sq ft for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $4 to $14.
+Is laminate floor cheaper in Greenville or Raleigh?
Raleigh is 60 miles away. The midpoint for 500 sq ft there is $4,100, which is 2% more than Greenville ($4,050). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Greenville?
About 58% at the midpoint, or $2,350 out of $4,050. Materials are 42% and permits 0%. Nationally, labor is 61%.
+What would main floor (500 sq ft) cost in Greenville?
$1,750 to $6,350. Pick a different size in the estimator above to get your own number.
+Does laminate floor need a permit in Greenville?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Greenville area (our national range of $0 to $0 scaled by the local price level).
+Is Greenville expensive for laminate floor compared with the rest of North Carolina?
Greenville is 1% below the North Carolina statewide estimate ($4,100 at the midpoint). We cover 11 metros in North Carolina; see the state page to compare them.
+What do floor layers (except carpet, wood and hard tiles) earn in Greenville?
BLS has no published metro figure here, so we use the statewide median of $24.86 an hour, compared with $27.15 nationally. The 25th to 75th percentile range is $21.47 to $29.98.
+What do basic and premium laminate floor work cost in Greenville?
For 500 sq ft, basic work runs $1,750 to $3,600 and premium work $4,500 to $6,350. Basic means: basic click-lock laminate on a flat subfloor. Premium means: premium or brand-name laminate, subfloor repair.
Laminate flooring near Greenville
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Laminate Flooring Installation Cost? (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
Note on derived figures: Materials = installed price minus HomeGuide's $3-$8 per sq ft laminate labor, matched low-to-low and high-to-high.