Laminate flooring cost in Burlington, NC
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (500 sq ft)
- $1,800 – $6,400
- Per sq ft
- $3.60 – $13
- before permit
- Versus US midpoint
- −9%
- US $4,500
- Rank of 300 metros
- #191
- 1 = most expensive
Local price for a laminate floor in the Burlington area: $1,800 to $6,400 for 500 sq ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 9% lower than the US figure. Floor layers (except carpet, wood and hard tiles) earn a median of $24.86 an hour in the Burlington area, 8% below the US median of $27.15.
Estimate your laminate flooring cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 500 sq ft in Burlington, NC, standard level
$3,200 to $5,000
About $6.35 to $10 per sq ft before permits. Labor is about 59% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,200 | $2,150 |
| Labor | $1,950 | $2,850 |
| Permits and fees | $0 | $0 |
| Total | $3,200 | $5,000 |
Cost breakdown for 500 sq ft in Burlington, NC
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $480 | $1,700 | $2,900 | 41% |
| Labor | $1,300 | $2,400 | $3,500 | 59% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $1,800 | $4,100 | $6,400 | 100% |
Why Burlington prices look the way they do
We price the labor side from BLS wage data for 2 trades: floor layers (except carpet, wood and hard tiles) at 60%, carpenters at 40%. Weighted together, Burlington wages are 0.87 times the national level. Labor makes up about 59% of the midpoint estimate (61% at national prices). BLS does not publish this trade for the metro, so we used the North Carolina statewide median.
Materials are scaled with BEA's regional price parity for goods. Burlington is at 96.6 against 100 for the US, so a materials line of $1,750 nationally becomes $1,700 here (midpoint, 500 sq ft). Permits follow the all-items index of 93.2: $0 to $0.
Data note: 60% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Burlington. The wage table below marks each row.
Is Burlington cheap or dear? The local comparison
Of the five closest metros, 1 is cheaper than Burlington. Fayetteville is the lowest at about $4,050 (midpoint, 500 sq ft), 75 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Burlington, NCthis page | $1,800 – $6,400 | $4,100 | |
| Durham, NC15 miles | $1,800 – $6,450 | $4,150 | +1% |
| Greensboro, NC20 miles | $1,800 – $6,400 | $4,100 | level |
| Winston, NC55 miles | $1,800 – $6,400 | $4,100 | level |
| Raleigh, NC55 miles | $1,800 – $6,450 | $4,100 | +1% |
| Fayetteville, NC75 miles | $1,750 – $6,350 | $4,050 | −1% |
| North Carolina (statewide) | $1,800 – $6,400 | $4,100 | level |
| United States | $2,000 – $7,000 | $4,500 | +10% |
Out of the 300 metros we cover, Burlington ranks #191 for the cost of this job (#1 is the most expensive). Statewide, Burlington is 0% above the North Carolina figure.
Elsewhere in North Carolina
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Charlotte, NC | 1,358,370 jobs | $1,900 – $6,600 | $4,250 | +4% |
| Raleigh, NC | 743,120 jobs | $1,800 – $6,450 | $4,100 | +1% |
| Greensboro, NC | 365,410 jobs | $1,800 – $6,400 | $4,100 | level |
| Durham, NC | 344,020 jobs | $1,800 – $6,450 | $4,150 | +1% |
| Winston, NC | 271,980 jobs | $1,800 – $6,400 | $4,100 | level |
| Wilmington, NC | 191,280 jobs | $1,800 – $6,450 | $4,100 | +1% |
Metros of a similar size
Big cities and small ones price differently, so here is Burlington against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Dover, DE | 68,080 jobs | $1,900 – $6,650 | $4,300 | +5% |
| Winchester, VA | 67,740 jobs | $1,800 – $6,350 | $4,100 | level |
| Traverse City, MI | 68,440 jobs | $1,800 – $6,350 | $4,100 | level |
| Morgantown, WV | 67,370 jobs | $1,700 – $6,100 | $3,900 | −5% |
Who does the work: Burlington trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Burlington the blend is 0.87.
Floor layers (except carpet, wood and hard tiles) (47-2042) carry 60% of the labor weighting. BLS does not publish this trade for the Burlington metro, so we used the North Carolina statewide median: $24.86 an hour against $27.15 for the US. The middle half of them earn between $21.47 and $29.98 an hour.
Carpenters (47-2031), 40% of the weighting: a median of $23.69 an hour, 19% below the US median of $29.12. The middle half of them earn between $21.18 and $27.09 an hour. About 100 work in the metro. That is 14.7 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.
A quick sensitivity check: moving the lead trade (floor layers (except carpet, wood and hard tiles)) from the median to the 75th percentile wage adds about $310 to the midpoint estimate; the 25th percentile takes off about $210. That is a swing of roughly 5.0% to 7.6% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Burlington has 67,830 jobs in total (BLS, May 2025), ranking 266th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Floor layers (except carpet, wood and hard tiles) (47-2042) | 60% | $21.47 | $24.86 | $29.98 | $27.15 | 0.92 | state |
| Carpenters (47-2031) | 40% | $21.18 | $23.69 | $27.09 | $29.12 | 0.81 | metro |
| Blended | 100% | 0.87 | |||||
Why two Burlington quotes can differ
Floating versus glued
Click-lock or floating laminate is the easiest and cheapest to install (HomeGuide).
Trim
Baseboards run $6-$9 per linear foot and are a common add-on.
Heated floors
Radiant floor heating adds $7-$17 per sq ft and has to go in before the floor does.
Pick a size, pick a tier: laminate flooring pricing in Burlington
The cited range is split into basic, standard and premium bands, then scaled to Burlington. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from one room (200 sq ft) to whole house (1,200 sq ft).
Basic
$1,800 to $3,650
Basic click-lock laminate on a flat subfloor
Standard
$3,200 to $5,000
Thicker waterproof laminate, standard trim
Premium
$4,550 to $6,400
Premium or brand-name laminate, subfloor repair
| Size | Basic | Standard | Premium |
|---|---|---|---|
| one room (200 sq ft) | $720 – $1,450 | $1,250 – $2,000 | $1,800 – $2,550 |
| main floor (500 sq ft) | $1,800 – $3,650 | $3,200 – $5,000 | $4,550 – $6,400 |
| whole house (1,200 sq ft) | $4,300 – $8,750 | $7,600 – $12,000 | $10,900 – $15,400 |
Planning more than one job in Burlington?
Jobs that often go together with laminate floor are priced below at their usual sizes, using the same Burlington wage and price inputs. Compared with national midpoints, kitchen remodel comes out highest (−6%) and bathroom remodel lowest (−11%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Hardwood flooring | 500 sq ft | $5,000 – $11,500 | −8% |
| Tile flooring | 200 sq ft | $2,000 – $9,200 | −9% |
| Kitchen remodel | 120 sq ft | $17,300 – $29,500 | −6% |
| Bathroom remodel | 45 sq ft | $4,200 – $20,700 | −11% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $3,200 to $5,000 for Burlington, NC is attached.
A detailed PDF report of this estimate, $9
The report lays out the laminate flooring numbers for Burlington, NC line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Laminate flooring in Burlington: your questions
+How much does it cost to install laminate flooring in Burlington?
For 500 sq ft, expect $1,800 to $6,400 in the Burlington area. A standard-spec job lands at $3,200 to $5,000. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for laminate floor in Burlington?
About $3.60 to $13 per sq ft for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $4 to $14.
+Is laminate floor cheaper in Burlington or Durham?
Durham is 15 miles away. The midpoint for 500 sq ft there is $4,150, which is 1% more than Burlington ($4,100). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Burlington?
About 59% at the midpoint, or $2,400 out of $4,100. Materials are 41% and permits 0%. Nationally, labor is 61%.
+What would main floor (500 sq ft) cost in Burlington?
$1,800 to $6,400. Pick a different size in the estimator above to get your own number.
+Does laminate floor need a permit in Burlington?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Burlington area (our national range of $0 to $0 scaled by the local price level).
+Is Burlington expensive for laminate floor compared with the rest of North Carolina?
Burlington is 0% above the North Carolina statewide estimate ($4,100 at the midpoint). We cover 11 metros in North Carolina; see the state page to compare them.
+What do floor layers (except carpet, wood and hard tiles) earn in Burlington?
BLS has no published metro figure here, so we use the statewide median of $24.86 an hour, compared with $27.15 nationally. The 25th to 75th percentile range is $21.47 to $29.98.
+What do basic and premium laminate floor work cost in Burlington?
For 500 sq ft, basic work runs $1,800 to $3,650 and premium work $4,550 to $6,400. Basic means: basic click-lock laminate on a flat subfloor. Premium means: premium or brand-name laminate, subfloor repair.
Laminate flooring near Burlington
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Laminate Flooring Installation Cost? (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
Note on derived figures: Materials = installed price minus HomeGuide's $3-$8 per sq ft laminate labor, matched low-to-low and high-to-high.