Kitchen remodel cost in Gainesville, GA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (120 sq ft)
- $17,300 – $29,500
- Per sq ft
- $140 – $234
- before permit
- Versus US midpoint
- −6%
- US $25,000
- Rank of 300 metros
- #222
- 1 = most expensive
If you want to remodel a kitchen in Gainesville, plan on $17,300 to $29,500 for 120 sq ft, all in. Per sq ft, that is $140 to $234 for materials and labor, with the permit on top. The local midpoint runs 6% lower than the national one. Carpenters earn a median of $22.24 an hour in the Gainesville area, 24% below the US median of $29.12.
Estimate your kitchen remodel cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 120 sq ft in Gainesville, GA, standard level
$21,000 to $25,900
About $169 to $206 per sq ft before permits. Labor is about 18% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $16,500 | $20,100 |
| Labor | $3,750 | $4,550 |
| Permits and fees | $770 | $1,150 |
| Total | $21,000 | $25,900 |
Cost breakdown for 120 sq ft in Gainesville, GA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $13,700 | $18,300 | $22,900 | 78% |
| Labor | $3,100 | $4,150 | $5,200 | 18% |
| Permits and fees | $480 | $970 | $1,450 | 4% |
| Total | $17,300 | $23,400 | $29,500 | 100% |
What is behind the Gainesville number
Labor is 18% of the midpoint bill here, against 20% nationally. The mix of trades behind this job is carpenters (45%), electricians (15%), plumbers, pipefitters and steamfitters (15%), tile and stone setters (10%), drywall and ceiling tile installers (10%), painters, construction and maintenance (5%). We weight each trade's local median wage by that share and compare it with the national median. In Gainesville the blended ratio comes out at 0.83.
On the materials line, the BEA goods price index for the Gainesville metro is 96.3 (US = 100). The midpoint materials bill for 120 sq ft comes to $18,300, compared with $19,000 at national prices. Permit and inspection fees are scaled by the broader index (96.8) and land at $480 to $1,450.
Data note: 20% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Gainesville. The wage table below marks each row.
Specs and site conditions that change a Gainesville bid
Permit
Kitchen remodel permits are $500-$1,500 and are usually based on project value.
Scope
A full kitchen update is $15,000-$50,000, a large remodel $50,000-$70,000+, and a partial refresh $60-$150 per square foot (HomeGuide).
Cabinets
In a 10x10 kitchen, cabinets alone are $3,000-$11,000 for stock or semi-custom and up to $26,500 for fully custom.
Pick a size, pick a tier: kitchen remodel pricing in Gainesville
Three bands are cut from the same cited range and localized for Gainesville wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.
Basic
$17,300 to $22,200
Update: cabinets, counters, flooring and lighting; same layout
Standard
$21,000 to $25,900
Full remodel, mid-range finishes, some layout changes
Premium
$24,700 to $29,500
Large or custom remodel, high-end finishes
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small kitchen (100 sq ft) | $14,500 – $18,700 | $17,600 – $21,800 | $20,700 – $24,900 |
| 10x12 kitchen (120 sq ft) | $17,300 – $22,200 | $21,000 – $25,900 | $24,700 – $29,500 |
| average kitchen (200 sq ft) | $28,600 – $36,400 | $34,500 – $42,400 | $40,400 – $48,300 |
| large kitchen (300 sq ft) | $42,600 – $54,200 | $51,300 – $62,900 | $60,000 – $71,700 |
Related projects, priced for Gainesville
Because every project leans on different trades, Gainesville's wage level does not move all prices equally. Against the US midpoint, window replacement runs −7% and home addition −13%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Kitchen cabinets | 25 linear ft | $3,850 – $12,100 | −12% |
| Bathroom remodel | 45 sq ft | $4,250 – $21,100 | −9% |
| Window replacement | 10 windows | $4,100 – $13,900 | −7% |
| Home addition | 300 sq ft | $32,900 – $66,800 | −13% |
| Shower pan | 1 pan | $800 – $2,500 | −11% |
| Kitchen backsplash | 30 sq ft | $270 – $1,400 | −8% |
Gainesville against nearby metros and the rest of Georgia
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 120 sq ft range from $23,100 to $24,500 across Gainesville and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Gainesville, GAthis page | $17,300 – $29,500 | $23,400 | |
| Athens, GA45 miles | $17,200 – $29,300 | $23,300 | −1% |
| Atlanta, GA50 miles | $18,200 – $30,900 | $24,500 | +5% |
| Dalton, GA70 miles | $17,200 – $29,200 | $23,200 | −1% |
| Greenville, SC85 miles | $17,300 – $29,500 | $23,400 | level |
| Macon, GA100 miles | $17,100 – $29,100 | $23,100 | −1% |
| Georgia (statewide) | $17,900 – $30,400 | $24,100 | +3% |
| United States | $18,500 – $31,500 | $25,000 | +7% |
Across 300 US metros, Gainesville comes in at #222 from the top. The priciest is Honolulu, HI at $30,000; the cheapest is Brownsville, TX at $22,100 (midpoints, 120 sq ft). Statewide, Gainesville is 3% below the Georgia figure.
Other Georgia metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Atlanta, GA | 2,889,670 jobs | $18,200 – $30,900 | $24,500 | +5% |
| Augusta, GA | 231,930 jobs | $17,700 – $30,100 | $23,900 | +2% |
| Savannah, GA | 198,360 jobs | $17,400 – $29,600 | $23,500 | level |
| Columbus, GA | 116,380 jobs | $17,100 – $29,200 | $23,200 | −1% |
| Athens, GA | 95,800 jobs | $17,200 – $29,300 | $23,300 | −1% |
| Macon, GA | 95,030 jobs | $17,100 – $29,100 | $23,100 | −1% |
Cities with a workforce like Gainesville's
Big cities and small ones price differently, so here is Gainesville against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| St. Cloud, MN | 103,920 jobs | $18,300 – $31,100 | $24,700 | +5% |
| Charleston, WV | 103,450 jobs | $17,500 – $29,800 | $23,700 | +1% |
| Champaign, IL | 105,500 jobs | $18,600 – $31,600 | $25,100 | +7% |
| Clarksville, TN | 103,220 jobs | $17,300 – $29,400 | $23,400 | level |
Gainesville labor market for kitchen remodel
Wages are the part of this estimate that changes most from town to town. 6 trades carry the job here, and each is compared with its US median. The weighted result for Gainesville is 0.83 times the national level.
For carpenters (47-2031, weighted 45%) the local median is $22.24 an hour, which is 24% below the national $29.12. The middle half of them earn between $18.85 and $26.44 an hour. BLS counts 180 of them working in the area, 17.3 for every 10,000 jobs (US: 43.1), so the local bench is thinner than average.
Electricians (47-2111), 15% of the weighting: a median of $28.04 an hour, 8% below the US median of $30.38. The middle half of them earn between $22.78 and $30.05 an hour. About 310 work in the metro. That is 29.8 per 10,000 jobs, compared with 48.7 nationally, so expect fewer local crews to bid.
For plumbers, pipefitters and steamfitters (47-2152, weighted 15%) the local median is $24.60 an hour, which is 20% below the national $30.67. The middle half of them earn between $21.94 and $29.99 an hour. BLS counts 210 of them working in the area, 20.2 for every 10,000 jobs (US: 30.0), so the local bench is thinner than average.
Tile and stone setters (47-2044) carry 10% of the labor weighting. BLS does not publish this trade for the Gainesville metro, so we used the Georgia statewide median: $23.00 an hour against $26.77 for the US. The middle half of them earn between $20.94 and $27.57 an hour.
Drywall and ceiling tile installers (47-2081) carry 10% of the labor weighting. BLS does not publish this trade for the Gainesville metro, so we used the Georgia statewide median: $28.01 an hour against $28.33 for the US. The middle half of them earn between $24.62 and $29.83 an hour.
For painters, construction and maintenance (47-2141, weighted 5%) the local median is $22.68 an hour, which is 5% below the national $23.75. The middle half of them earn between $18.73 and $24.51 an hour. BLS counts 50 of them working in the area, 4.8 for every 10,000 jobs (US: 14.5), so the local bench is thinner than average.
Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($26.44 an hour) instead of the median, the labor line grows by about $320. At the 25th percentile ($18.85) it shrinks by about $260. The total moves by 1.4% or 1.1%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 103,870 jobs in the Gainesville area. That makes it the 198th largest of the 300 metros we cover, with 0.07% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 45% | $18.85 | $22.24 | $26.44 | $29.12 | 0.76 | metro |
| Electricians (47-2111) | 15% | $22.78 | $28.04 | $30.05 | $30.38 | 0.92 | metro |
| Plumbers, pipefitters and steamfitters (47-2152) | 15% | $21.94 | $24.60 | $29.99 | $30.67 | 0.80 | metro |
| Tile and stone setters (47-2044) | 10% | $20.94 | $23.00 | $27.57 | $26.77 | 0.86 | state |
| Drywall and ceiling tile installers (47-2081) | 10% | $24.62 | $28.01 | $29.83 | $28.33 | 0.99 | state |
| Painters, construction and maintenance (47-2141) | 5% | $18.73 | $22.68 | $24.51 | $23.75 | 0.95 | metro |
| Blended | 100% | 0.83 | |||||
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $21,000 to $25,900 for Gainesville, GA is attached.
Take this estimate with you: PDF report, $9
Multi-page report for Gainesville, GA: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Kitchen remodel in Gainesville: your questions
+How much does it cost to remodel a kitchen in Gainesville?
For 120 sq ft, expect $17,300 to $29,500 in the Gainesville area. A standard-spec job lands at $21,000 to $25,900. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for kitchen remodel in Gainesville?
About $140 to $234 per sq ft for materials and labor, plus $480 to $1,450 for the permit if one is needed. The US range is $150 to $250.
+Is kitchen remodel cheaper in Gainesville or Athens?
Athens is 45 miles away. The midpoint for 120 sq ft there is $23,300, which is 1% less than Gainesville ($23,400). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Gainesville?
About 18% at the midpoint, or $4,150 out of $23,400. Materials are 78% and permits 4%. Nationally, labor is 20%.
+What would average kitchen (200 sq ft) cost in Gainesville?
$28,600 to $48,300. Pick a different size in the estimator above to get your own number.
+Does kitchen remodel need a permit in Gainesville?
Often, but rules are set by your city or county building office, so call before you hire. Budget $480 to $1,450 for fees in the Gainesville area (our national range of $500 to $1,500 scaled by the local price level).
+Is Gainesville expensive for kitchen remodel compared with the rest of Georgia?
Gainesville is 3% below the Georgia statewide estimate ($24,100 at the midpoint). We cover 10 metros in Georgia; see the state page to compare them.
+What do carpenters earn in Gainesville?
The BLS median is $22.24 an hour in the Gainesville area, compared with $29.12 nationally. The 25th to 75th percentile range is $18.85 to $26.44.
+What do basic and premium kitchen remodel work cost in Gainesville?
For 120 sq ft, basic work runs $17,300 to $22,200 and premium work $24,700 to $29,500. Basic means: update: cabinets, counters, flooring and lighting; same layout. Premium means: large or custom remodel, high-end finishes.
Kitchen remodel near Gainesville
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Kitchen Remodel Cost? (2026) (accessed November 4, 2026)
- Cost to Renovate: Renovation Labor Report 2026: Where the Money Goes (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
Note on derived figures: Materials = 70% of the low installed price and 85% of the high one, from HomeGuide's statement that professional labor is 15-30% of a kitchen remodeling budget. Cost to Renovate's mid-range kitchen split (45% labor, 50% materials) sits inside that band.