Skip to content
CostLocal

Kitchen cabinets cost in Kenosha, WI

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (25 linear ft)
$4,450 – $14,600
Per linear ft
$158 – $523
before permit
Versus US midpoint
+4%
US $9,150
Rank of 300 metros
#58
1 = most expensive

Local price for new kitchen cabinets in the Kenosha area: $4,450 to $14,600 for 25 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 4% higher than the US figure. Building materials run about 6% above the US average here (BEA goods price index 106.2).

Estimate your kitchen cabinets cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Semi-custom with upgraded finishes

Estimated cost for 25 linear ft in Kenosha, WI, standard level

$7,500 to $11,500

About $267 to $413 per linear ft before permits. Labor is about 48% of the bill.

Cost breakdown
PartLowHigh
Materials$3,450$4,500
Labor$3,250$5,800
Permits and fees$810$1,200
Total$7,500$11,500
Save and get a PDF report

Cost breakdown for 25 linear ft in Kenosha, WI

Part of the jobLowMidpointHighShare
Materials$2,650$4,000$5,30042%
Labor$1,300$4,500$7,75048%
Permits and fees$510$1,000$1,50011%
Total$4,450$9,500$14,600100%

Where the Kenosha price comes from

We price the labor side from BLS wage data for 3 trades: carpenters at 80%, electricians at 10%, plumbers, pipefitters and steamfitters at 10%. Weighted together, Kenosha wages are 1.03 times the national level. Labor makes up about 48% of the midpoint estimate (48% at national prices).

Materials are scaled with BEA's regional price parity for goods. Kenosha is at 106.2 against 100 for the US, so a materials line of $3,750 nationally becomes $4,000 here (midpoint, 25 linear ft). Permits follow the all-items index of 101.1: $510 to $1,500.

Kenosha: what basic, standard and premium work costs

The cited range is split into basic, standard and premium bands, then scaled to Kenosha. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from small galley (15 linear ft) to large kitchen (40 linear ft).

Basic

$4,450 to $8,500

Stock cabinets, same layout

Standard

$7,500 to $11,500

Semi-custom with upgraded finishes

Premium

$10,500 to $14,600

Custom cabinetry, new layout

Cost by size and quality level
SizeBasicStandardPremium
small galley (15 linear ft)$2,850 – $5,450$4,800 – $7,400$6,750 – $9,350
10x10 kitchen (20 linear ft)$3,650 – $7,000$6,150 – $9,500$8,650 – $12,000
average kitchen (25 linear ft)$4,450 – $8,500$7,500 – $11,500$10,500 – $14,600
large kitchen (40 linear ft)$6,800 – $13,100$11,500 – $17,700$16,200 – $22,400

What nearby projects cost in Kenosha

Jobs that often go together with kitchen cabinets are priced below at their usual sizes, using the same Kenosha wage and price inputs. Compared with national midpoints, shower pan comes out highest (+12%) and storm door lowest (+5%); the gap comes from the trades each job uses.

Related projects with local prices
ProjectSizeRangevs. US
Kitchen remodel120 sq ft$19,700 – $33,400+6%
Storm door1 door$370 – $1,000+5%
Front door1 door$520 – $2,650+5%
Bathroom remodel45 sq ft$5,100 – $25,200+8%
Shower pan1 pan$1,050 – $3,100+12%
Kitchen backsplash30 sq ft$330 – $1,600+8%

Kitchen cabinets: what moves the price in Kenosha

  • Permit

    Kitchen remodeling permits are $500-$1,500 where one is needed, usually when you change layout, plumbing or wiring.

  • Stock, semi-custom or custom

    Stock cabinets run $100-$400 per linear foot installed, semi-custom $150-$700, and custom $500-$1,200 (HomeGuide).

  • Layout changes

    Keeping the plumbing and wiring where it is saves real money. Moving them brings in plumbers and electricians.

How Kenosha compares

Of the five closest metros, 2 are cheaper than Kenosha. Racine is the lowest at about $9,100 (midpoint, 25 linear ft), 15 miles away.

Comparison with nearby areas
AreaRangeMidpointvs. here
Kenosha, WIthis page$4,450 – $14,600$9,500
Racine, WI15 miles$4,150 – $14,000$9,100−4%
Milwaukee, WI20 miles$4,200 – $14,400$9,300−2%
Chicago, IL55 miles$4,950 – $17,300$11,100+17%
Janesville, WI60 miles$4,400 – $15,500$9,900+4%
Rockford, IL60 miles$4,350 – $15,500$9,950+4%
Wisconsin (statewide)$4,150 – $14,100$9,150−4%
United States$4,250 – $14,000$9,150−4%

Out of the 300 metros we cover, Kenosha ranks #58 for the cost of this job (#1 is the most expensive). Statewide, Kenosha is 4% above the Wisconsin figure.

Elsewhere in Wisconsin

Wisconsin metros compared with Kenosha
MetroSizeRangeMidpointvs. here
Milwaukee, WI820,780 jobs$4,200 – $14,400$9,300−2%
Madison, WI408,070 jobs$4,200 – $14,400$9,300−2%
Green Bay, WI174,550 jobs$4,150 – $14,000$9,100−4%
Appleton, WI124,230 jobs$4,150 – $14,100$9,150−4%
Oshkosh, WI93,750 jobs$4,500 – $16,400$10,500+10%
Eau Claire, WI86,060 jobs$4,100 – $13,900$9,000−5%

Metros of a similar size

Big cities and small ones price differently, so here is Kenosha against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Warner Robins, GA76,050 jobs$3,900 – $12,300$8,100−15%
Abilene, TX75,070 jobs$3,700 – $11,500$7,600−20%
Racine, WI76,280 jobs$4,150 – $14,000$9,100−4%
Sioux City, IA75,010 jobs$3,900 – $12,700$8,250−13%

Who does the work: Kenosha trade wages

The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Kenosha the blend is 1.03.

Carpenters (47-2031), 80% of the weighting: a median of $28.90 an hour, in line with the US median of $29.12. The middle half of them earn between $24.15 and $35.62 an hour. About 310 work in the metro. That is 41.1 per 10,000 jobs, compared with 43.1 nationally, so the supply of crews looks typical.

For electricians (47-2111, weighted 10%) the local median is $36.04 an hour, which is 19% above the national $30.38. The middle half of them earn between $23.67 and $42.33 an hour. BLS counts 120 of them working in the area, 15.9 for every 10,000 jobs (US: 48.7), so the local bench is thinner than average.

Plumbers, pipefitters and steamfitters (47-2152), 10% of the weighting: a median of $37.18 an hour, 21% above the US median of $30.67. The middle half of them earn between $28.43 and $48.11 an hour. About 150 work in the metro. That is 19.9 per 10,000 jobs, compared with 30.0 nationally, so expect fewer local crews to bid.

A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $810 to the midpoint estimate; the 25th percentile takes off about $570. That is a swing of roughly 6.0% to 8.5% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.

Kenosha has 75,450 jobs in total (BLS, May 2025), ranking 245th by size among the 300 metros on this site.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Carpenters (47-2031)80%$24.15$28.90$35.62$29.120.99metro
Electricians (47-2111)10%$23.67$36.04$42.33$30.381.19metro
Plumbers, pipefitters and steamfitters (47-2152)10%$28.43$37.18$48.11$30.671.21metro
Blended100%1.03

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $7,500 to $11,500 for Kenosha, WI is attached.

Take this estimate with you: PDF report, $9

The report lays out the kitchen cabinets numbers for Kenosha, WI line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Kitchen cabinets in Kenosha: your questions

+How much does it cost to replace kitchen cabinets in Kenosha?

For 25 linear ft, expect $4,450 to $14,600 in the Kenosha area. A standard-spec job lands at $7,500 to $11,500. Small jobs usually cost more per linear ft and large ones less.

+What is the price per linear ft for kitchen cabinets in Kenosha?

About $158 to $523 per linear ft for materials and labor, plus $510 to $1,500 for the permit if one is needed. The US range is $150 to $500.

+Is kitchen cabinets cheaper in Kenosha or Racine?

Racine is 15 miles away. The midpoint for 25 linear ft there is $9,100, which is 4% less than Kenosha ($9,500). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Kenosha?

About 48% at the midpoint, or $4,500 out of $9,500. Materials are 42% and permits 11%. Nationally, labor is 48%.

+What would average kitchen (25 linear ft) cost in Kenosha?

$4,450 to $14,600. Pick a different size in the estimator above to get your own number.

+Does kitchen cabinets need a permit in Kenosha?

Often, but rules are set by your city or county building office, so call before you hire. Budget $510 to $1,500 for fees in the Kenosha area (our national range of $500 to $1,500 scaled by the local price level).

+Is Kenosha expensive for kitchen cabinets compared with the rest of Wisconsin?

Kenosha is 4% above the Wisconsin statewide estimate ($9,150 at the midpoint). We cover 12 metros in Wisconsin; see the state page to compare them.

+What do carpenters earn in Kenosha?

The BLS median is $28.90 an hour in the Kenosha area, compared with $29.12 nationally. The 25th to 75th percentile range is $24.15 to $35.62.

+What do basic and premium kitchen cabinets work cost in Kenosha?

For 25 linear ft, basic work runs $4,450 to $8,500 and premium work $10,500 to $14,600. Basic means: stock cabinets, same layout. Premium means: custom cabinetry, new layout.

Kitchen cabinets near Kenosha

Kitchen cabinets: all pricesKitchen cabinets in WisconsinAll projects in KenoshaWisconsin cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = installed price minus HomeGuide's labor figure of $50-$300 per linear foot, matched low-to-low and high-to-high. Treat the split as a rough guide: labor swings with the cabinet type.