Skip to content
CostLocal

Kitchen cabinets cost in Lexington Park, MD

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (25 linear ft)
$4,250 – $14,100
Per linear ft
$151 – $505
before permit
Versus US midpoint
+1%
US $9,150
Rank of 300 metros
#90
1 = most expensive

Lexington Park homeowners pay roughly $4,250 to $14,100 to replace kitchen cabinets at 25 linear ft, or $151 to $505 per linear ft (permit not included). Against the US midpoint, Lexington Park is almost level. Carpenters earn a median of $30.23 an hour in the Lexington Park area, 4% above the US median of $29.12.

Estimate your kitchen cabinets cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Semi-custom with upgraded finishes

Estimated cost for 25 linear ft in Lexington Park, MD, standard level

$7,250 to $11,200

About $257 to $399 per linear ft before permits. Labor is about 48% of the bill.

Cost breakdown
PartLowHigh
Materials$3,250$4,250
Labor$3,200$5,750
Permits and fees$810$1,200
Total$7,250$11,200
Save and get a PDF report

Cost breakdown for 25 linear ft in Lexington Park, MD

Part of the jobLowMidpointHighShare
Materials$2,500$3,750$5,00041%
Labor$1,250$4,450$7,65048%
Permits and fees$500$1,000$1,50011%
Total$4,250$9,200$14,100100%

What is behind the Lexington Park number

We price the labor side from BLS wage data for 3 trades: carpenters at 80%, electricians at 10%, plumbers, pipefitters and steamfitters at 10%. Weighted together, Lexington Park wages are 1.02 times the national level. Labor makes up about 48% of the midpoint estimate (48% at national prices).

On the materials line, the BEA goods price index for the Lexington Park metro is 99.7 (US = 100). The midpoint materials bill for 25 linear ft comes to $3,750, compared with $3,750 at national prices. Permit and inspection fees are scaled by the broader index (100.8) and land at $500 to $1,500.

Local wages behind the labor line

Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Lexington Park is 1.02 times the national level.

For carpenters (47-2031, weighted 80%) the local median is $30.23 an hour, which is 4% above the national $29.12. The middle half of them earn between $26.36 and $35.38 an hour. BLS counts 210 of them working in the area, 29.7 for every 10,000 jobs (US: 43.1), so the local bench is thinner than average.

Electricians (47-2111), 10% of the weighting: a median of $29.59 an hour, in line with the US median of $30.38. The middle half of them earn between $24.62 and $44.46 an hour. About 340 work in the metro. That is 48.1 per 10,000 jobs, compared with 48.7 nationally, so the supply of crews looks typical.

For plumbers, pipefitters and steamfitters (47-2152, weighted 10%) the local median is $27.74 an hour, which is 10% below the national $30.67. The middle half of them earn between $23.62 and $35.64 an hour. BLS counts 260 of them working in the area, 36.8 for every 10,000 jobs (US: 30.0), so the local bench is deeper than average.

Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($35.38 an hour) instead of the median, the labor line grows by about $620. At the 25th percentile ($26.36) it shrinks by about $470. The total moves by 6.7% or 5.1%, so wages alone rarely explain a quote that is far outside our range.

For context on the local economy, BLS counts 70,650 jobs in the Lexington Park area. That makes it the 259th largest of the 300 metros we cover, with 0.05% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Carpenters (47-2031)80%$26.36$30.23$35.38$29.121.04metro
Electricians (47-2111)10%$24.62$29.59$44.46$30.380.97metro
Plumbers, pipefitters and steamfitters (47-2152)10%$23.62$27.74$35.64$30.670.90metro
Blended100%1.02

Why two Lexington Park quotes can differ

  • Permit

    Kitchen remodeling permits are $500-$1,500 where one is needed, usually when you change layout, plumbing or wiring.

  • Stock, semi-custom or custom

    Stock cabinets run $100-$400 per linear foot installed, semi-custom $150-$700, and custom $500-$1,200 (HomeGuide).

  • Layout changes

    Keeping the plumbing and wiring where it is saves real money. Moving them brings in plumbers and electricians.

What nearby projects cost in Lexington Park

Because every project leans on different trades, Lexington Park's wage level does not move all prices equally. Against the US midpoint, storm door runs +1% and shower pan −8%.

Related projects with local prices
ProjectSizeRangevs. US
Kitchen remodel120 sq ft$18,400 – $31,300−1%
Storm door1 door$360 – $960+1%
Front door1 door$510 – $2,500+1%
Bathroom remodel45 sq ft$4,550 – $22,400−4%
Shower pan1 pan$830 – $2,600−8%
Kitchen backsplash30 sq ft$280 – $1,400−7%

How Lexington Park compares

Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 25 linear ft range from $8,400 to $9,550 across Lexington Park and its five closest metros.

Comparison with nearby areas
AreaRangeMidpointvs. here
Lexington Park, MDthis page$4,250 – $14,100$9,200
Washington, DC65 miles$4,450 – $14,600$9,550+4%
Baltimore, MD70 miles$4,350 – $14,400$9,400+2%
Dover, DE75 miles$4,000 – $12,900$8,400−8%
Richmond, VA80 miles$4,000 – $12,900$8,450−8%
Virginia Beach, VA100 miles$4,000 – $12,900$8,450−8%
Maryland (statewide)$4,400 – $14,600$9,500+3%
United States$4,250 – $14,000$9,150−1%

Across 300 US metros, Lexington Park comes in at #90 from the top. The priciest is Honolulu, HI at $12,000; the cheapest is Brownsville, TX at $7,050 (midpoints, 25 linear ft). Statewide, Lexington Park is 3% below the Maryland figure.

Other Maryland metros

Maryland metros compared with Lexington Park
MetroSizeRangeMidpointvs. here
Baltimore, MD1,356,680 jobs$4,350 – $14,400$9,400+2%
Hagerstown, MD107,170 jobs$4,050 – $13,200$8,650−6%

Cities with a workforce like Lexington Park's

Big cities and small ones price differently, so here is Lexington Park against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Bismarck, ND71,270 jobs$4,000 – $13,100$8,550−7%
Janesville, WI69,870 jobs$4,400 – $15,500$9,900+8%
Redding, CA71,550 jobs$4,600 – $15,400$10,000+9%
Wausau, WI69,530 jobs$3,950 – $13,000$8,450−8%

Cost by quality level and size in Lexington Park

Three bands are cut from the same cited range and localized for Lexington Park wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.

Basic

$4,250 to $8,200

Stock cabinets, same layout

Standard

$7,250 to $11,200

Semi-custom with upgraded finishes

Premium

$10,200 to $14,100

Custom cabinetry, new layout

Cost by size and quality level
SizeBasicStandardPremium
small galley (15 linear ft)$2,750 – $5,300$4,650 – $7,200$6,550 – $9,100
10x10 kitchen (20 linear ft)$3,500 – $6,750$5,950 – $9,200$8,350 – $11,600
average kitchen (25 linear ft)$4,250 – $8,200$7,250 – $11,200$10,200 – $14,100
large kitchen (40 linear ft)$6,550 – $12,600$11,100 – $17,200$15,600 – $21,700

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $7,250 to $11,200 for Lexington Park, MD is attached.

A detailed PDF report of this estimate, $9

Multi-page report for Lexington Park, MD: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Kitchen cabinets in Lexington Park: your questions

+How much does it cost to replace kitchen cabinets in Lexington Park?

For 25 linear ft, expect $4,250 to $14,100 in the Lexington Park area. A standard-spec job lands at $7,250 to $11,200. Small jobs usually cost more per linear ft and large ones less.

+What is the price per linear ft for kitchen cabinets in Lexington Park?

About $151 to $505 per linear ft for materials and labor, plus $500 to $1,500 for the permit if one is needed. The US range is $150 to $500.

+Is kitchen cabinets cheaper in Lexington Park or Washington?

Washington is 65 miles away. The midpoint for 25 linear ft there is $9,550, which is 4% more than Lexington Park ($9,200). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Lexington Park?

About 48% at the midpoint, or $4,450 out of $9,200. Materials are 41% and permits 11%. Nationally, labor is 48%.

+What would average kitchen (25 linear ft) cost in Lexington Park?

$4,250 to $14,100. Pick a different size in the estimator above to get your own number.

+Does kitchen cabinets need a permit in Lexington Park?

Often, but rules are set by your city or county building office, so call before you hire. Budget $500 to $1,500 for fees in the Lexington Park area (our national range of $500 to $1,500 scaled by the local price level).

+Is Lexington Park expensive for kitchen cabinets compared with the rest of Maryland?

Lexington Park is 3% below the Maryland statewide estimate ($9,500 at the midpoint). We cover 3 metros in Maryland; see the state page to compare them.

+What do carpenters earn in Lexington Park?

The BLS median is $30.23 an hour in the Lexington Park area, compared with $29.12 nationally. The 25th to 75th percentile range is $26.36 to $35.38.

+What do basic and premium kitchen cabinets work cost in Lexington Park?

For 25 linear ft, basic work runs $4,250 to $8,200 and premium work $10,200 to $14,100. Basic means: stock cabinets, same layout. Premium means: custom cabinetry, new layout.

Kitchen cabinets near Lexington Park

Kitchen cabinets: all pricesKitchen cabinets in MarylandAll projects in Lexington ParkMaryland cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = installed price minus HomeGuide's labor figure of $50-$300 per linear foot, matched low-to-low and high-to-high. Treat the split as a rough guide: labor swings with the cabinet type.