Kitchen cabinets cost in Macon, GA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (25 linear ft)
- $3,750 – $11,500
- Per linear ft
- $132 – $406
- before permit
- Versus US midpoint
- −17%
- US $9,150
- Rank of 300 metros
- #289
- 1 = most expensive
If you want to replace kitchen cabinets in Macon, plan on $3,750 to $11,500 for 25 linear ft, all in. Per linear ft, that is $132 to $406 for materials and labor, with the permit on top. The local midpoint runs 17% lower than the national one. Carpenters earn a median of $20.03 an hour in the Macon area, 31% below the US median of $29.12.
Estimate your kitchen cabinets cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 25 linear ft in Macon, GA, standard level
$6,050 to $9,150
About $214 to $324 per linear ft before permits. Labor is about 41% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $3,150 | $4,100 |
| Labor | $2,200 | $4,000 |
| Permits and fees | $710 | $1,050 |
| Total | $6,050 | $9,150 |
Cost breakdown for 25 linear ft in Macon, GA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $2,400 | $3,600 | $4,800 | 47% |
| Labor | $890 | $3,100 | $5,350 | 41% |
| Permits and fees | $440 | $890 | $1,350 | 12% |
| Total | $3,750 | $7,600 | $11,500 | 100% |
Where the Macon price comes from
Labor is 41% of the midpoint bill here, against 48% nationally. The mix of trades behind this job is carpenters (80%), electricians (10%), plumbers, pipefitters and steamfitters (10%). We weight each trade's local median wage by that share and compare it with the national median. In Macon the blended ratio comes out at 0.71.
On the materials line, the BEA goods price index for the Macon metro is 96.3 (US = 100). The midpoint materials bill for 25 linear ft comes to $3,600, compared with $3,750 at national prices. Permit and inspection fees are scaled by the broader index (88.5) and land at $440 to $1,350.
Macon labor market for kitchen cabinets
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Macon is 0.71 times the national level.
For carpenters (47-2031, weighted 80%) the local median is $20.03 an hour, which is 31% below the national $29.12. The middle half of them earn between $16.47 and $27.05 an hour. BLS counts 70 of them working in the area, 7.4 for every 10,000 jobs (US: 43.1), so the local bench is thinner than average.
Electricians (47-2111), 10% of the weighting: a median of $26.11 an hour, 14% below the US median of $30.38. The middle half of them earn between $20.16 and $34.06 an hour. About 380 work in the metro. That is 40.0 per 10,000 jobs, compared with 48.7 nationally, so expect fewer local crews to bid.
For plumbers, pipefitters and steamfitters (47-2152, weighted 10%) the local median is $23.13 an hour, which is 25% below the national $30.67. The middle half of them earn between $19.33 and $28.67 an hour. BLS counts 170 of them working in the area, 17.9 for every 10,000 jobs (US: 30.0), so the local bench is thinner than average.
Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($27.05 an hour) instead of the median, the labor line grows by about $840. At the 25th percentile ($16.47) it shrinks by about $430. The total moves by 11.1% or 5.6%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 95,030 jobs in the Macon-Bibb County area. That makes it the 211th largest of the 300 metros we cover, with 0.06% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 80% | $16.47 | $20.03 | $27.05 | $29.12 | 0.69 | metro |
| Electricians (47-2111) | 10% | $20.16 | $26.11 | $34.06 | $30.38 | 0.86 | metro |
| Plumbers, pipefitters and steamfitters (47-2152) | 10% | $19.33 | $23.13 | $28.67 | $30.67 | 0.75 | metro |
| Blended | 100% | 0.71 | |||||
Kitchen cabinets: what moves the price in Macon
Stock, semi-custom or custom
Stock cabinets run $100-$400 per linear foot installed, semi-custom $150-$700, and custom $500-$1,200 (HomeGuide).
Layout changes
Keeping the plumbing and wiring where it is saves real money. Moving them brings in plumbers and electricians.
Removal
Taking out the old cabinets is $300-$600, though many installers fold it into their labor price.
What nearby projects cost in Macon
Because every project leans on different trades, Macon's wage level does not move all prices equally. Against the US midpoint, kitchen remodel runs −8% and shower pan −14%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Kitchen remodel | 120 sq ft | $17,100 – $29,100 | −8% |
| Storm door | 1 door | $300 – $840 | −13% |
| Front door | 1 door | $410 – $2,300 | −10% |
| Bathroom remodel | 45 sq ft | $4,150 – $20,600 | −12% |
| Shower pan | 1 pan | $780 – $2,450 | −14% |
| Kitchen backsplash | 30 sq ft | $270 – $1,350 | −9% |
Is Macon cheap or dear? The local comparison
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 25 linear ft range from $7,400 to $8,500 across Macon and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Macon, GAthis page | $3,750 – $11,500 | $7,600 | |
| Warner Robins, GA25 miles | $3,900 – $12,300 | $8,100 | +6% |
| Atlanta, GA70 miles | $4,100 – $12,900 | $8,500 | +12% |
| Columbus, GA70 miles | $3,800 – $11,800 | $7,800 | +2% |
| Athens, GA80 miles | $3,800 – $11,900 | $7,850 | +3% |
| Albany, GA85 miles | $3,700 – $11,200 | $7,400 | −2% |
| Georgia (statewide) | $4,000 – $12,600 | $8,300 | +9% |
| United States | $4,250 – $14,000 | $9,150 | +20% |
Across 300 US metros, Macon comes in at #289 from the top. The priciest is Honolulu, HI at $12,000; the cheapest is Brownsville, TX at $7,050 (midpoints, 25 linear ft). Statewide, Macon is 9% below the Georgia figure.
Other Georgia metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Atlanta, GA | 2,889,670 jobs | $4,100 – $12,900 | $8,500 | +12% |
| Augusta, GA | 231,930 jobs | $4,050 – $13,400 | $8,700 | +15% |
| Savannah, GA | 198,360 jobs | $3,850 – $12,100 | $8,000 | +5% |
| Columbus, GA | 116,380 jobs | $3,800 – $11,800 | $7,800 | +2% |
| Gainesville, GA | 103,870 jobs | $3,850 – $12,100 | $8,000 | +5% |
| Athens, GA | 95,800 jobs | $3,800 – $11,900 | $7,850 | +3% |
Cities with a workforce like Macon's
Big cities and small ones price differently, so here is Macon against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Fort Smith, AR | 95,560 jobs | $3,650 – $11,400 | $7,500 | −1% |
| Barnstable, MA | 94,110 jobs | $4,400 – $15,100 | $9,750 | +28% |
| Athens, GA | 95,800 jobs | $3,800 – $11,900 | $7,850 | +3% |
| Billings, MT | 93,800 jobs | $4,150 – $14,000 | $9,050 | +19% |
Macon: what basic, standard and premium work costs
Three bands are cut from the same cited range and localized for Macon wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.
Basic
$3,750 to $6,850
Stock cabinets, same layout
Standard
$6,050 to $9,150
Semi-custom with upgraded finishes
Premium
$8,400 to $11,500
Custom cabinetry, new layout
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small galley (15 linear ft) | $2,400 – $4,400 | $3,900 – $5,900 | $5,400 – $7,400 |
| 10x10 kitchen (20 linear ft) | $3,100 – $5,650 | $5,000 – $7,550 | $6,900 – $9,450 |
| average kitchen (25 linear ft) | $3,750 – $6,850 | $6,050 – $9,150 | $8,400 – $11,500 |
| large kitchen (40 linear ft) | $5,700 – $10,500 | $9,250 – $14,000 | $12,800 – $17,600 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $6,050 to $9,150 for Macon, GA is attached.
Take this estimate with you: PDF report, $9
The report lays out the kitchen cabinets numbers for Macon, GA line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Kitchen cabinets in Macon: your questions
+How much does it cost to replace kitchen cabinets in Macon?
For 25 linear ft, expect $3,750 to $11,500 in the Macon area. A standard-spec job lands at $6,050 to $9,150. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for kitchen cabinets in Macon?
About $132 to $406 per linear ft for materials and labor, plus $440 to $1,350 for the permit if one is needed. The US range is $150 to $500.
+Is kitchen cabinets cheaper in Macon or Warner Robins?
Warner Robins is 25 miles away. The midpoint for 25 linear ft there is $8,100, which is 6% more than Macon ($7,600). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Macon?
About 41% at the midpoint, or $3,100 out of $7,600. Materials are 47% and permits 12%. Nationally, labor is 48%.
+What would average kitchen (25 linear ft) cost in Macon?
$3,750 to $11,500. Pick a different size in the estimator above to get your own number.
+Does kitchen cabinets need a permit in Macon?
Often, but rules are set by your city or county building office, so call before you hire. Budget $440 to $1,350 for fees in the Macon area (our national range of $500 to $1,500 scaled by the local price level).
+Is Macon expensive for kitchen cabinets compared with the rest of Georgia?
Macon is 9% below the Georgia statewide estimate ($8,300 at the midpoint). We cover 10 metros in Georgia; see the state page to compare them.
+What do carpenters earn in Macon?
The BLS median is $20.03 an hour in the Macon area, compared with $29.12 nationally. The 25th to 75th percentile range is $16.47 to $27.05.
+What do basic and premium kitchen cabinets work cost in Macon?
For 25 linear ft, basic work runs $3,750 to $6,850 and premium work $8,400 to $11,500. Basic means: stock cabinets, same layout. Premium means: custom cabinetry, new layout.
Kitchen cabinets near Macon
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Do Kitchen Cabinets Cost? (2026 Prices) (accessed November 4, 2026)
- HomeGuide: How Much Does Cabinet Installation Cost? (New 2026 Prices) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
Note on derived figures: Materials = installed price minus HomeGuide's labor figure of $50-$300 per linear foot, matched low-to-low and high-to-high. Treat the split as a rough guide: labor swings with the cabinet type.