Kitchen cabinets cost in Delaware
Statewide estimate from BLS wages and BEA prices. Reviewed Nov 4, 2026.
- Statewide range (25 linear ft)
- $4,150 – $13,700
- Per linear ft
- $145 – $488
- before permit
- Versus US midpoint
- −2%
- US $9,150
- Metros covered
- 1
Delaware prices for kitchen cabinets: $4,150 to $13,700 for 25 linear ft, or $145 to $488 per linear ft without the permit. The state midpoint is 2% below the national one. Local wages for carpenters are $28.46 an hour.
Delaware has one metro in our dataset, Dover, so the statewide and metro figures are close. The state figure uses BLS statewide wages, which include rural areas.
Estimate your kitchen cabinets cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 25 linear ft in Delaware (statewide), standard level
$7,000 to $10,800
About $248 to $385 per linear ft before permits. Labor is about 48% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $3,150 | $4,100 |
| Labor | $3,100 | $5,550 |
| Permits and fees | $800 | $1,200 |
| Total | $7,000 | $10,800 |
Cost breakdown for 25 linear ft in Delaware
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $2,400 | $3,600 | $4,800 | 40% |
| Labor | $1,250 | $4,300 | $7,400 | 48% |
| Permits and fees | $500 | $1,000 | $1,500 | 11% |
| Total | $4,150 | $8,900 | $13,700 | 100% |
Wages behind the Delaware number
Statewide wages come from BLS's state-level estimates, which blend big cities with small towns and rural areas. 3 trades drive the labor line for this job, and the weighted ratio against the national wage level is 0.98 for Delaware.
For carpenters (47-2031, weighted 80%) the local median is $28.46 an hour, which is in line with the national $29.12. The middle half of them earn between $23.35 and $36.24 an hour. BLS counts 2,250 of them working in the state, 46.4 for every 10,000 jobs (US: 43.1), so the local bench is about average.
Electricians (47-2111), 10% of the weighting: a median of $30.63 an hour, in line with the US median of $30.38. The middle half of them earn between $23.10 and $43.52 an hour. About 2,260 work in the state. That is 46.6 per 10,000 jobs, compared with 48.7 nationally, so the supply of crews looks typical.
For plumbers, pipefitters and steamfitters (47-2152, weighted 10%) the local median is $31.11 an hour, which is in line with the national $30.67. The middle half of them earn between $24.93 and $37.42 an hour. BLS counts 1,590 of them working in the state, 32.8 for every 10,000 jobs (US: 30.0), so the local bench is about average.
A crew paid at the 75th percentile for carpenters ($36.24 an hour) would add about $940 to the statewide midpoint; one at the 25th percentile ($23.35) would take off about $610. Use that as a rough guide to how far a bid can sit from our midpoint on wages alone.
BLS counts 484,790 jobs across Delaware (May 2025), which is 0.3% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 80% | $23.35 | $28.46 | $36.24 | $29.12 | 0.98 | state |
| Electricians (47-2111) | 10% | $23.10 | $30.63 | $43.52 | $30.38 | 1.01 | state |
| Plumbers, pipefitters and steamfitters (47-2152) | 10% | $24.93 | $31.11 | $37.42 | $30.67 | 1.01 | state |
| Blended | 100% | 0.98 | |||||
Quality levels and sizes in Delaware
The cited range is cut into three overlapping bands (basic, standard and premium) and scaled to statewide Delaware wages and prices. The grid prices the same bands at 4 common sizes.
Basic
$4,150 to $7,950
Stock cabinets, same layout
Standard
$7,000 to $10,800
Semi-custom with upgraded finishes
Premium
$9,850 to $13,700
Custom cabinetry, new layout
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small galley (15 linear ft) | $2,700 – $5,150 | $4,500 – $6,950 | $6,350 – $8,800 |
| 10x10 kitchen (20 linear ft) | $3,400 – $6,550 | $5,750 – $8,900 | $8,100 – $11,200 |
| average kitchen (25 linear ft) | $4,150 – $7,950 | $7,000 – $10,800 | $9,850 – $13,700 |
| large kitchen (40 linear ft) | $6,300 – $12,200 | $10,700 – $16,600 | $15,100 – $21,000 |
Kitchen cabinets: what moves the price in Delaware
Stock, semi-custom or custom
Stock cabinets run $100-$400 per linear foot installed, semi-custom $150-$700, and custom $500-$1,200 (HomeGuide).
Layout changes
Keeping the plumbing and wiring where it is saves real money. Moving them brings in plumbers and electricians.
Removal
Taking out the old cabinets is $300-$600, though many installers fold it into their labor price.
Permit
Kitchen remodeling permits are $500-$1,500 where one is needed, usually when you change layout, plumbing or wiring.
How Delaware compares with nearby states
Delaware ranks 26 of 51 (the 50 states plus DC) for kitchen cabinets, where 1 is the most expensive. The costliest is Hawaii at $11,400 and the cheapest Arkansas at $7,800, both for 25 linear ft at the midpoint. Delaware sits at $8,900. The five states closest by workforce center are listed below.
| State | Distance | Range | Midpoint | vs. here |
|---|---|---|---|---|
| New Jersey | 60 miles away | $4,600 – $15,200 | $9,850 | +11% |
| Maryland | 60 miles away | $4,400 – $14,600 | $9,500 | +7% |
| Pennsylvania | 100 miles away | $4,200 – $13,900 | $9,050 | +2% |
| District of Columbia | 110 miles away | $4,600 – $15,200 | $9,900 | +11% |
| New York | 150 miles away | $4,700 – $16,000 | $10,400 | +16% |
If you are planning more than one job in Delaware
The table prices neighboring jobs at their usual sizes using statewide Delaware wages and prices. Against national midpoints, shower pan comes out highest (−1%) and front door lowest (−3%), because each job leans on different trades.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Kitchen remodel | 120 sq ft | $17,900 – $30,500 | −3% |
| Storm door | 1 door | $340 – $920 | −3% |
| Front door | 1 door | $490 – $2,400 | −3% |
| Bathroom remodel | 45 sq ft | $4,650 – $23,000 | −1% |
| Shower pan | 1 pan | $930 – $2,750 | −1% |
| Kitchen backsplash | 30 sq ft | $290 – $1,450 | −2% |
Kitchen cabinets cost by metro in Delaware
Delaware has one metro in our dataset, Dover, so the statewide and metro figures are close. The state figure uses BLS statewide wages, which include rural areas. Each row prices the default size with that metro's own BLS wages and BEA price levels, so the gap between rows is real local variation rather than a flat markup.
| Metro | Range (25 linear ft) | Midpoint | vs. state |
|---|---|---|---|
| Dover, DE | $4,000 – $12,900 | $8,400 | −5% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $7,000 to $10,800 for Delaware is attached.
A detailed PDF report of this estimate, $9
Multi-page report for Delaware: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Kitchen cabinets in Delaware: your questions
+How much does it cost to replace kitchen cabinets in Delaware?
$4,150 to $13,700 for 25 linear ft, using statewide wages and prices. Metro areas inside Delaware can sit above or below that.
+Which city in Delaware is cheapest for kitchen cabinets?
Dover at about $8,400 (midpoint, 25 linear ft).
+Is kitchen cabinets cheaper in Delaware than the US average?
It is 2% cheaper: $8,900 against $9,150 for 25 linear ft at the midpoint.
+What share of the price is labor in Delaware?
About 48% ($4,300). Materials are 40%. Statewide labor for this job is weighted 0.98x the national wage level.
+What do carpenters earn in Delaware?
The BLS statewide median is $28.46 an hour, against $29.12 for the US. The 25th to 75th percentile range is $23.35 to $36.24.
+Where does Delaware rank for kitchen cabinets costs?
26th most expensive of 51 (the 50 states plus DC) at the midpoint, $8,900 for 25 linear ft. Rank 1 is the costliest.
+What do basic and premium kitchen cabinets work cost in Delaware?
For 25 linear ft, basic work runs $4,150 to $7,950 and premium work $9,850 to $13,700. Basic means: stock cabinets, same layout. Premium means: custom cabinetry, new layout.
Kitchen cabinets by city in Delaware
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Do Kitchen Cabinets Cost? (2026 Prices) (accessed November 4, 2026)
- HomeGuide: How Much Does Cabinet Installation Cost? (New 2026 Prices) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
Note on derived figures: Materials = installed price minus HomeGuide's labor figure of $50-$300 per linear foot, matched low-to-low and high-to-high. Treat the split as a rough guide: labor swings with the cabinet type.