Skip to content
CostLocal

Kitchen cabinets cost in Auburn, AL

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (25 linear ft)
$3,850 – $12,100
Per linear ft
$136 – $431
before permit
Versus US midpoint
−13%
US $9,150
Rank of 300 metros
#265
1 = most expensive

Auburn homeowners pay roughly $3,850 to $12,100 to replace kitchen cabinets at 25 linear ft, or $136 to $431 per linear ft (permit not included). Against the US midpoint, Auburn is 13% lower. Carpenters earn a median of $22.89 an hour in the Auburn area, 21% below the US median of $29.12.

Estimate your kitchen cabinets cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Semi-custom with upgraded finishes

Estimated cost for 25 linear ft in Auburn, AL, standard level

$6,300 to $9,600

About $225 to $343 per linear ft before permits. Labor is about 44% of the bill.

Cost breakdown
PartLowHigh
Materials$3,150$4,100
Labor$2,500$4,450
Permits and fees$700$1,050
Total$6,300$9,600
Save and get a PDF report

Cost breakdown for 25 linear ft in Auburn, AL

Part of the jobLowMidpointHighShare
Materials$2,400$3,600$4,80045%
Labor$990$3,500$5,95044%
Permits and fees$440$880$1,30011%
Total$3,850$7,950$12,100100%

Where the Auburn price comes from

Labor is 44% of the midpoint bill here, against 48% nationally. The mix of trades behind this job is carpenters (80%), electricians (10%), plumbers, pipefitters and steamfitters (10%). We weight each trade's local median wage by that share and compare it with the national median. In Auburn the blended ratio comes out at 0.79.

On the materials line, the BEA goods price index for the Auburn metro is 96.4 (US = 100). The midpoint materials bill for 25 linear ft comes to $3,600, compared with $3,750 at national prices. Permit and inspection fees are scaled by the broader index (87.9) and land at $440 to $1,300.

Cost by quality level and size in Auburn

Three bands are cut from the same cited range and localized for Auburn wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.

Basic

$3,850 to $7,150

Stock cabinets, same layout

Standard

$6,300 to $9,600

Semi-custom with upgraded finishes

Premium

$8,800 to $12,100

Custom cabinetry, new layout

Cost by size and quality level
SizeBasicStandardPremium
small galley (15 linear ft)$2,500 – $4,600$4,050 – $6,200$5,650 – $7,800
10x10 kitchen (20 linear ft)$3,150 – $5,900$5,200 – $7,900$7,250 – $9,950
average kitchen (25 linear ft)$3,850 – $7,150$6,300 – $9,600$8,800 – $12,100
large kitchen (40 linear ft)$5,900 – $11,000$9,700 – $14,800$13,500 – $18,600

Local wages behind the labor line

Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Auburn is 0.79 times the national level.

For carpenters (47-2031, weighted 80%) the local median is $22.89 an hour, which is 21% below the national $29.12. The middle half of them earn between $20.02 and $26.50 an hour. BLS counts 200 of them working in the area, 27.5 for every 10,000 jobs (US: 43.1), so the local bench is thinner than average.

Electricians (47-2111), 10% of the weighting: a median of $25.89 an hour, 15% below the US median of $30.38. The middle half of them earn between $22.29 and $29.93 an hour. About 230 work in the metro. That is 31.6 per 10,000 jobs, compared with 48.7 nationally, so expect fewer local crews to bid.

For plumbers, pipefitters and steamfitters (47-2152, weighted 10%) the local median is $24.79 an hour, which is 19% below the national $30.67. The middle half of them earn between $21.03 and $29.26 an hour. BLS counts 200 of them working in the area, 27.5 for every 10,000 jobs (US: 30.0), so the local bench is about average.

Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($26.50 an hour) instead of the median, the labor line grows by about $430. At the 25th percentile ($20.02) it shrinks by about $340. The total moves by 5.4% or 4.3%, so wages alone rarely explain a quote that is far outside our range.

For context on the local economy, BLS counts 72,710 jobs in the Auburn-Opelika area. That makes it the 252nd largest of the 300 metros we cover, with 0.05% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Carpenters (47-2031)80%$20.02$22.89$26.50$29.120.79metro
Electricians (47-2111)10%$22.29$25.89$29.93$30.380.85metro
Plumbers, pipefitters and steamfitters (47-2152)10%$21.03$24.79$29.26$30.670.81metro
Blended100%0.79

Kitchen cabinets: what moves the price in Auburn

  • Permit

    Kitchen remodeling permits are $500-$1,500 where one is needed, usually when you change layout, plumbing or wiring.

  • Stock, semi-custom or custom

    Stock cabinets run $100-$400 per linear foot installed, semi-custom $150-$700, and custom $500-$1,200 (HomeGuide).

  • Layout changes

    Keeping the plumbing and wiring where it is saves real money. Moving them brings in plumbers and electricians.

Is Auburn cheap or dear? The local comparison

Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 25 linear ft range from $7,400 to $8,250 across Auburn and its five closest metros.

Comparison with nearby areas
AreaRangeMidpointvs. here
Auburn, ALthis page$3,850 – $12,100$7,950
Columbus, GA40 miles$3,800 – $11,800$7,800−2%
Montgomery, AL50 miles$3,850 – $12,100$8,000level
Dothan, AL85 miles$3,750 – $11,500$7,600−5%
Birmingham, AL100 miles$3,950 – $12,600$8,250+3%
Albany, GA100 miles$3,700 – $11,200$7,400−7%
Alabama (statewide)$3,900 – $12,300$8,100+1%
United States$4,250 – $14,000$9,150+14%

Across 300 US metros, Auburn comes in at #265 from the top. The priciest is Honolulu, HI at $12,000; the cheapest is Brownsville, TX at $7,050 (midpoints, 25 linear ft). Statewide, Auburn is 1% below the Alabama figure.

Other Alabama metros

Alabama metros compared with Auburn
MetroSizeRangeMidpointvs. here
Birmingham, AL520,290 jobs$3,950 – $12,600$8,250+3%
Huntsville, AL266,650 jobs$3,900 – $12,400$8,150+2%
Mobile, AL172,550 jobs$3,900 – $12,400$8,150+2%
Montgomery, AL165,550 jobs$3,850 – $12,100$8,000level
Tuscaloosa, AL108,460 jobs$3,900 – $12,400$8,150+2%
Daphne, AL87,120 jobs$3,850 – $12,200$8,000+1%

Cities with a workforce like Auburn's

Big cities and small ones price differently, so here is Auburn against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Bloomington, IN73,240 jobs$4,150 – $14,100$9,150+15%
Prescott Valley, AZ72,300 jobs$4,050 – $13,300$8,700+9%
Kahului, HI73,750 jobs$5,050 – $17,400$11,200+41%
Coeur d'Alene, ID72,280 jobs$4,050 – $13,200$8,650+8%

Planning more than one job in Auburn?

Because every project leans on different trades, Auburn's wage level does not move all prices equally. Against the US midpoint, kitchen remodel runs −7% and shower pan −14%.

Related projects with local prices
ProjectSizeRangevs. US
Kitchen remodel120 sq ft$17,200 – $29,200−7%
Storm door1 door$310 – $850−11%
Front door1 door$430 – $2,300−8%
Bathroom remodel45 sq ft$4,100 – $20,400−12%
Shower pan1 pan$780 – $2,450−14%
Kitchen backsplash30 sq ft$270 – $1,350−10%

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $6,300 to $9,600 for Auburn, AL is attached.

Detailed kitchen cabinets report for Auburn, AL, $9

The report lays out the kitchen cabinets numbers for Auburn, AL line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Kitchen cabinets in Auburn: your questions

+How much does it cost to replace kitchen cabinets in Auburn?

For 25 linear ft, expect $3,850 to $12,100 in the Auburn area. A standard-spec job lands at $6,300 to $9,600. Small jobs usually cost more per linear ft and large ones less.

+What is the price per linear ft for kitchen cabinets in Auburn?

About $136 to $431 per linear ft for materials and labor, plus $440 to $1,300 for the permit if one is needed. The US range is $150 to $500.

+Is kitchen cabinets cheaper in Auburn or Columbus?

Columbus is 40 miles away. The midpoint for 25 linear ft there is $7,800, which is 2% less than Auburn ($7,950). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Auburn?

About 44% at the midpoint, or $3,500 out of $7,950. Materials are 45% and permits 11%. Nationally, labor is 48%.

+What would average kitchen (25 linear ft) cost in Auburn?

$3,850 to $12,100. Pick a different size in the estimator above to get your own number.

+Does kitchen cabinets need a permit in Auburn?

Often, but rules are set by your city or county building office, so call before you hire. Budget $440 to $1,300 for fees in the Auburn area (our national range of $500 to $1,500 scaled by the local price level).

+Is Auburn expensive for kitchen cabinets compared with the rest of Alabama?

Auburn is 1% below the Alabama statewide estimate ($8,100 at the midpoint). We cover 9 metros in Alabama; see the state page to compare them.

+What do carpenters earn in Auburn?

The BLS median is $22.89 an hour in the Auburn area, compared with $29.12 nationally. The 25th to 75th percentile range is $20.02 to $26.50.

+What do basic and premium kitchen cabinets work cost in Auburn?

For 25 linear ft, basic work runs $3,850 to $7,150 and premium work $8,800 to $12,100. Basic means: stock cabinets, same layout. Premium means: custom cabinetry, new layout.

Kitchen cabinets near Auburn

Kitchen cabinets: all pricesKitchen cabinets in AlabamaAll projects in AuburnAlabama cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = installed price minus HomeGuide's labor figure of $50-$300 per linear foot, matched low-to-low and high-to-high. Treat the split as a rough guide: labor swings with the cabinet type.